The contaminants notorious for causing brown stains in toilet bowls are iron, manganese and sulfur. These pollutants can also produce iron bacteria, manganese bacteria and sulfur bacteria, which also can produce brown stains.
Pour about one cup of white vinegar into the toilet bowl, followed by about one cup of baking soda, then let it rest for around 10 minutes. It's a good idea to wear gloves when using this as a toilet cleaner and to have eye protection.
She said: “Push out the water with a toilet brush and then pour one litre of vinegar down the toilet. “Let this sit for an hour to three hours, or even overnight and then scrub the toilet bowl and flush. “Add a good toilet cleaning product or soda crystals to the bowl and then scrub the stubborn marks some more.”
Lemon juice and vinegar
Getting rid of limescale doesn't require expensive cleaning products! Lemon juice and vinegar can help you tackle most of your limescale problems — a win for your pocket and for the environment.
Vinegar is a natural acid that can dissolve calcium deposits. You can pour vinegar into the toilet bowl and let it sit for a few hours before scrubbing with a toilet brush.
The best way to tackle this problem is with an acidic solution, which can cut through the limescale. This can be achieved by using household products like baking soda and white vinegar.
Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight. The next morning, sprinkle a little baking soda into the bowl, scrub, and then flush clean.
For this cleaning task, the more, the merrier, pour vinegar (about 1 litre) and a few cups of bicarb will work fine. Give the solution a mix until you have a paste. Then, add it to the toilet bowl and leave it to soak for as long as possible, at least an hour.
Clean Toilet Stains FAQ
Pour a 120ml bottle of white vinegar into the toilet bowl and put down the lid. Don't use or flush the toilet for eight or so hours, then use a toilet brush to scrub.
spraying the effected area with undiluted white vinegar. creating a mix of white vinegar and borax to scrub affected surfaces. lime water and water in a 50:50 ratio. Baking soda.
Let It Sit For 12 Hours
Leave the vinegar and water mixture in the toilet tank for 12 hours without flushing the toilet. This is why this cleaning process is best done overnight, as you are less likely to need the bathroom throughout the night than during the day.
The experts said: "Fill a bottle with equal parts white vinegar and water, spraying the vinegar solution directly onto the areas affected by limescale in the shower. Let the solution sit for about 10 to 15 minutes to allow the vinegar to break down the limescale."
Calcium carbonate buildup can be dissolved using mild acids such as lemon (citric acid), baking soda (sodium bicarbonate) or white vinegar. This method is ideal for removing limescale deposits from flat surfaces and around taps.
Fortunately, limescale is relatively easy to control because calcium carbonate is soluble in acidic solutions. It can be removed with almost any type of acid, though the one you choose will probably be dependent on the degree of the problem.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
It is also widely used in horticulture. It is a versatile product. In addition to disinfection, the use of hydrogen peroxide helps to remove limescale and corrosion.
Hydrochloric acid is much stronger than acetic acid, for example, and therefore tends to remove scale faster. Weak acids such as acetic or citric acids may be preferred, however, where damage to the substrate is to be minimised.
In this case, a basic toilet cleaning product may not be enough, and you will need to use undiluted bleach. As a one-stop cleaning solution, pour one cup of bleach around the bowl. Then tackle every inch with a toilet brush or a handheld scrub brush. Let it sit for five minutes, then flush.
Pour lemon juice or vinegar on the deposits. Don't dilute the vinegar or lemon juice, or you'll reduce its effectiveness. Leave the acidic liquids in place for a few hours to do their work, preferably overnight. Scrub the scale with a stiff-bristled toilet brush before flushing the toilet.
Pour a cup of Dawn liquid dish detergent into the toilet bowl and let it sit for 15 minutes. After 15 minutes, pour a bucket of hot water from waist height into the toilet bowl to clear it out. This tip comes from Merry Maids: Mix 3 drops of Dawn in 1 gallon of water and fill a spray bottle with the solution.