If you notice stains on your white composite sink, simply make up a mixture of dish soap and water, and wipe the sink down with a lint-free cloth or non-abrasive sponge. For the really difficult stains that just won't budge, try a mixture of vinegar and water and scrub the area with a soft bristle brush.
Instead, it is suggested that a simple solution of 50% white vinegar and 50% water is your best bet. Make up the solution into a spray bottle, spray the afflicted area, and with a sponge or brush give it a gentle scrub. Follow this up by rinsing away the vinegar with water and drying off the sink with a towel or cloth.
Use soft or micro fibre cloths (eg. E-cloth). A 50% mix of water and white vinegar can be used to remove limescale deposits, ensure to rinse thoroughly after use, do not leave the vinegar in contact with the surface. A nylon scratch pad or toothbrush can be used on difficult areas.
This type of sink is easy to clean
Using a non-abrasive cleaner will keep it clean. Taking care of it properly will preserve its color for many years. Keeping it clean is also important. You can use a magic eraser sponge to remove stains and a 50/50 water-bleach solution for cleaning.
Removing Stains and minor scuff marks
Rinse well. Also, the use of Bar Keepers Friend (directions included on bottle) will help remove stubborn stains. Finally, clean with BLANCOCLEAN to put a protective coating back on the sink's surface.
CLEANING of GRANITE COMPOSITE SINKS
Generic stains should be removed immediately. Cleaning powders and creams which are even slightly abrasive should not be used, nor chemically aggressive detergents.
Quality composite granite sinks are formed under high pressure, making them nonporous, hygienic, and resistant to heat, stains, scratches, and chips. However, cleaning and removing stains from a granite composite sink can be tricky.
For a more thorough clean, sprinkle baking soda over the whole sink, then spray with a 75/25 solution of white vinegar and water to create a fizzing solution. A gentle scrub with a soft sponge and an old toothbrush is enough to give your sink a thorough clean.
Stain Resistant: Unlike natural granite, this non-porous material requires no sealing and will keep from staining by design.
Composites are non-porous – This makes them much more sanitary than granite, which can conceal bits of food and bacteria in its crevices. Composites also can withstand disinfectant products without damaging the material, unlike granite.
Yes, composite sinks can withstand boiling water. There is no issue with pouring hot water down a granite, quartz, or solid surface sink.
In fact, composite granite is harder and heavier than its natural counterpart, though exponentially less expensive. And, it will maintain its look and strength well, thanks to its non-porous, stain-resistant nature.
Clean the heck out of the sink, then clean it again with rubbing alcohol. Soak/dip the cups in hot water to make them more pliable, then apply a little petrol jelly around the cup.
SURFACE LUSTER
Clean, rinse and dry sink completely. To restore luster and extend the time between cleanings apply a thin, even coating of Quartz Sink Conditioner, food-safe mineral oil, or olive oil to the entire sink surface with a cloth. Remove excess with a cloth or leave overnight. Reapply as needed.
Dampen your sponge and, using the soft side, start to scrub the basin in circular motions (our sponge with a loofah scourer would be perfect for this). Baking soda isn't too coarse, so it will clean without scratching your sink (if you're worried about scratches, swap your sponge out for a cloth).
The materials vary by brand but most composite sinks are made of approximately 80% quartz or other similar materials that are basically designed to make the sink as stain, heat, impact and scratch proof as possible. As such, they are distinctly more durable than stainless steel or ceramic counterparts.
Resin sinks are lightweight, and look similar to granite or quartz sinks, but with a thinner profile and smaller price tag. Also known as epoxy or composite sinks.
First, we want to make sure we do not accidentally damage the surface. Avoid using any harsh/acidic/alkaline-containing products on your sink. This means avoiding lemon juice, vinegar, bleach, window cleaner, oven cleaner, and most leading brands formulated to remove Calcium, Lime or Rust, ammonia, et cetera.
It is essential you avoid extreme variations in temperatures coming into contact with your sink – such as pouring out a pan of boiling water followed by ice cold water. This can cause thermal shock in composite sinks and will result in hairline cracks appearing.