How do you fix a badly clogged toilet?

Author: Prof. Georgette Will  |  Last update: Tuesday, April 7, 2026

Unclog Your Toilet with Baking Soda and Vinegar Then try pouring 1 cup of baking soda and 2 cups of vinegar into the toilet. The mixture will bubble excessively, which is why it's important to first remove the excess water. Let the bubbles sit for at least 20 minutes before you try to flush.

How to unclog a deep toilet clog?

Break Up the Clog With Hot Water or Drain Cleaner

Pour the hot water into your toilet and let it remain there for a few minutes to see if it loosens your blockage. You'll know the hot water is working if you see the water begin to recede. After that, give your toilet a couple of flushes to further break apart the clog.

How to unblock a severely blocked toilet?

Pour half a cup of baking soda into the toilet bowl. Then, heat 2-3 litres of water in a saucepan. Before the water boils, add half a cup of white vinegar to the pan. Pour the vinegar and water mix into the toilet bowl and close the lid.

What is the strongest thing to unclog a toilet?

One of the strongest substances for unclogging a toilet is a commercial drain cleaner specifically designed for toilet clogs. These cleaners typically contain powerful chemicals that dissolve organic matter and stubborn blockages.

How to fix a clogged toilet that won't flush?

We recommend you add a cup of baking soda to your blocked toilet and wait for some minutes. Next, pour two cups of vinegar slowly into the toilet. Vinegar and baking soda will typically react to form bubbles, so ensure you pour carefully and slowly to prevent the toilet water from overflowing or splashing.

How To Unclog A Toilet Without A Plunger

What do plumbers use to unblock toilets?

Often referred to as a drain snake, a plumbing auger is a tool that consists of a long, flexible cable with a spiral shaped head that is used to clear blockages in pipes or drains. To clear a toilet clog, the auger is inserted into toilet and twisted by hand, or by machine, to help break up the obstruction.

Why is my toilet not unclogging after plunging?

You may just be using it incorrectly. Do this: Next time you have a clog, use your plunger like this: Ensure the flange lip is unfolded. Get a good seal on the toilet drain (that is, make sure you're covering the entire drain or you won't have enough pressure to loosen the clog.)

What will dissolve a blocked toilet?

Baking Soda And Vinegar

Instead of creating a volcano, this vinegar and baking soda mixture will work together to loosen up the clog in almost no time. We suggest wearing rubber gloves for this. As this method creates a pretty chemical reaction, it is recommended that you use it in a toilet bowl that is not too full.

What is the strongest drain clog remover?

The Santeen Sulfuric Acid Drain Opener proved to be the most potent among all the chemical drain cleaners we tested, effectively dissolving 80% of the hair, 80% of the organic matter, 40% of the grease and 76% of the paper products.

What not to do when unclogging a toilet?

3 Ways NOT to Unclog Your Toilet (Unless You Want to Damage It)
  1. Using chemical drain cleaners (like Drano) Most chemical drain cleaners clear your drain by breaking down the clog with a chemical reaction. ...
  2. Plunging down too hard. ...
  3. Using the wrong plumber's snake.

Will letting a clogged toilet sit unclog it?

Leaving a clogged toilet overnight may seem like a harmless way to put off an unpleasant task, but it can lead to more significant issues. The most obvious problem is that the clog might not magically disappear. Instead, it can worsen as the blockage hardens or settles deeper into the pipes.

How to unclog a toilet when the water is high?

Align the rubber cup of a toilet plunger over the centre of the hole of the toilet bowl. Apply downward pressure slowly at first, gradually increasing the speed and intensity. If a clog has caused the overflow, a plunger will dislodge the mass and allow water to escape through the plumbing.

How do you unblock a toilet full of tissue?

If the blockage is a build-up of tissue paper, pour 3-4 cups of hot (not boiling) water from waist height into the toilet bowl. Give the hot water around 20 minutes to breakdown the blockage.

How do you unblock a severe toilet?

Recap of Methods:
  1. Hot Water Method: Utilizes hot water to create pressure and dislodge blockages.
  2. Plunger Method: Creates suction and pressure to clear blockages.
  3. Baking Soda and Vinegar Method: Chemical reaction to break down blockages.
  4. Toilet Auger Method: Physically removes or breaks up stubborn blockages.

What is the best way to unclog a deep clog?

Baking soda and vinegar can also push through stubborn clogs if used right. These methods work well for simple clogs in places like the bathroom sink. For tougher or deeper clogs, a plumbing snake or even a wire coat hanger works well. It can reach the clog and fix the problem.

How long does dish soap take to unclog a toilet?

Pouring dish soap down a toilet will unclog many obstructions. Pour 1/2- to 1-cup of dish soap directly in the toilet water and wait about 30 minutes before flushing. Follow the dish soap with a gallon of hot water if dish soap alone does not work.

Why should you never use baking soda and vinegar to unclog a drain?

The fizzing reaction and gas created may help loosen some small blockages. However, it is not typically strong enough to break down larger clogs or remove hard-to-reach debris. As a result of the above facts, if you have a serious drain clog, using baking soda and vinegar is unlikely to be effective.

What is the best liquid to unclog a toilet?

Drano for toilets is a popular choice for many homeowners when dealing with stubborn clogs. This powerful product has been a trusted solution for many years, effectively breaking down and dislodging blockages that can cause significant inconvenience and potential damage in the bathroom.

What do plumbers use to unblock drains?

Properties and Uses: Hydrochloric acid, also known as muriatic acid, is a highly corrosive acid used extensively by plumbers to clear severe clogs. It reacts rapidly with organic materials in drains, breaking them down into simpler compounds that can be easily flushed away.

How to unclog a toilet when nothing works?

If plunging the toilet doesn't work, here are seven ways to fix a clogged toilet.
  1. Drain snake. If the plunger isn't working, your next best option is to use a drain snake. ...
  2. Boiling Water. ...
  3. Chemical Drain Cleaners. ...
  4. Baking Soda Mixture. ...
  5. Vinegar Mixture. ...
  6. Squirt Gun Drainer. ...
  7. Call a Plumber.

Will a toilet clog eventually dissolve?

Clogs consisting of degradable materials like waste and toilet paper could clear on their own over time. These substances break down within water and don't always require you to take action to eliminate blockages. However, non-degradable clogs won't resolve on their own and can lead to other serious issues.

What is good to pour in clogged toilet?

Pour in Soap & Hot Water

Dish soap is more dense than hot water, and it's also designed to help break down grease and grime—especially mixed with hot water. It should be no surprise, then, that this mixture can also help loosen many materials that can clog a toilet bowl.

How to unclog a toilet full of poop and water in a home?

Make your own drain cleaner by pouring one cup of baking soda and two cups of vinegar into the toilet and adding a half gallon of hot water. Dish soap can also help loosen some obstructions. When using either method, allow the solution to sit overnight and then flush the toilet to see if the obstruction has cleared.

How much does it cost to unclog a toilet?

Costs Associated With Unclogging A Toilet

Toilet unclogging projects can range anywhere from $85-$600, depending upon the overall extent of the clog. Basic cleanouts will only cost around $80-$150, but serious clogs may require more sophisticated drain cleaning technology that increases the average costs to $150-$300.

Is it bad to leave the toilet clogged?

Hygiene and Odor Concerns

Stagnant toilet bowl water can start smelling due to waste materials remaining present. The longer a clog is left, the worse those odors get, and they can spread to other areas in your home. Aside from the unpleasant smell, there are health risks associated with stagnant water.

Previous article
How to repaint a wall a different color?
Next article
Is it bad to inhale the smell of mold?