If you want to clean your driveway quickly and efficiently, use a pressure washer of at least 3100 PSI. Using pressure washers with pressures ranging from 1000 to 2300 PSI will also help you clean your driveway, but it will take a long time.
Medium Duty 2000-2800 PSI
They're great for cleaning concrete, brick, and wood. They work especially well for cleaning patios, sidings, roofs, decks, and fences.
To clean concrete effectively, use a power washer with a pressure rating of at least 3000 psi and a flow rate of at least 4 gallons per minute (gpm).
Concrete and asphalt require more cleaning power. You'll want to use the turbo nozzle on the 1600 PSI for hard-to-clean driveways, sidewalks, and patios as well as brick paving. For wood decks and painted surfaces, switch to the gentler 40-degree nozzle.
Most electric pressure washers create 1300-1700 pounds per square inch of pressure (PSI) with a water flow of 1.5 gallons per minute (GPM), but experienced contractors recommend between 2000 and 3000 PSI and a flow of at least 2.5 GPM to clean dirty concrete effectively.
2,000 to 3,000 PSI
Good for cleaning concrete surfaces with light to moderate oil stains, most automotive cleaning, pools, many industrial applications.
Our recommendation ranges from as low as 3,000 PSI to as high as 4,000 PSI.
Most people believe that concrete is solid and almost invincible. However, using a pressure washer with the incorrect tip or using too much pressure or a combination of the two can etch concrete.
Most electric pressure washers create 1300-1700 pounds per square inch of pressure (PSI) with a water flow of 1.5 gallons per minute (GPM), but experienced contractors recommend between 2000 and 3000 PSI and a flow of at least 2.5 GPM to clean dirty concrete effectively. …
Domestic vs Industrial or Professional Pressure Cleaner
If your pressure cleaner only goes up to 1500 psi at maximum, you can still clean your driveway. However, take note that it may take a little longer and more effort, and there may be some dirt and stains it will not get out.
The concrete curing time takes about 28 days to be fully cured. Differences in weather, mix, and other items can slightly change the timeframe of the curing period. The general rule of thumb for concrete drying is 28 days to dry for every 1 inch of slab thickness.
Often more affordable than higher strength concrete, 2,500 PSI can be useful for driveways and walkways. However, some may choose a stronger concrete, like 3,000 PSI, to avoid excessive cracking. A good use for this concrete is a walkway on the side of a home that doesn't receive excessive traffic.
It is generally recommended that you wait at least a week before driving on the surface with a passenger vehicle. Even then, the slower curing areas, such as the edges, will not be as hard as they need to be. For this reason, you'll want to be careful until the concrete is fully cured.
There's no doubt that electric pressure washers from 1,300 to 2,300 psi can wash a concrete driveway, but it'll take longer. If you have a large driveway with lots of stains, you'll want more power to do the job faster. I chose the 3,100-psi gas pressure washer and cut the job time in half.
However, in general, a psi of 3000-4000 is commonly used for residential driveways.
You can power wash concrete all year as long as the temperature is about 40 degrees Fahrenheit. Most homeowners and businesses prefer to do it in the spring or summer to reduce the spread and growth of algae and mold. It also reduces pollen, which can affect allergies.
The quick answer is yes, power washing can degrade a concrete surface.
For most cars, a psi between 1200 and 2200 is recommended. This range provides enough cleaning power to remove dirt and grime without damaging the car's paint or delicate surfaces. Yes, you can use soap with a pressure washer.
As with any major roadway, asphalt is best sealed in driveways. The chances of oil damage and the hot sun take their toll in time, and a good sealant every three years or so can be a huge asset after pressure washing.
Once the pressure washing is complete, it is important to wait until the surface is completely dry before applying any sealant. Depending on temperature and humidity levels, this process can take anywhere from 24-48 hours.
Concrete typically takes 24 to 48 hours to dry enough for you to walk or drive on it.
Pavement and floor slabs in homes and business are made of concrete at 4,000 PSI and able to withstand traffic and support heavy loads. Concrete that exceeds 5,000 PSI is used in special construction projects that require building materials that are able to withstand heavy impact and extreme wear and tear.