In an average sized inground pool, we would recommend 10 to 20 gallons of Liquid Shock. Liquid Shock in 5 gallon containers is the cheapest way to purchase Shock. One gallon of inexpensive algaecide may also be added. This should help kill whatever algae was living in your pool.
A nylon or rubber brush is the correct choice for scrubbing the sides of a soft-sided above-ground pool. A large pool brush makes quick work of the job, but you may need a smaller brush to clean corners. Once the particles have been removed from the sides of the pool, turn your filter back on and agitate the water.
In theory, if you have a cloudy swimming pool, you can add chlorine to “shock it” and clear things up. Chlorine will get the job done. But, the amounts may vary and you may have to really pound the pool with chlorine to get the water totally clear.
Chlorine issues often cause cloudy water. Adding a recommended dose of pool shock to your pool can clear it right up. Poor circulation or filtration can contribute to cloudy water. Make sure your pump and filter are working properly.
Algae will remain in your pool after shock if you've had insufficient chlorine and an overabundance of metal elements in the pool water. Therefore, to start the cleaning process. Remove all the debris from the pool with a leaf net and then let the smaller dirt fragments settle.
Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity. Many commercial pool products for raising alkalinity utilize baking soda as their main active ingredient.
Pool Clarifiers Coagulate Small Particles
In The Swim pool water clarifiers work by causing fine debris particles to coagulate into larger particles which can then be removed from the pool water through the pool filter system.
Since brown algae is extremely chlorine-resistant, several other chemicals such as shock and an algaecide specifically designed for mustard algae will help get rid of the infestation. This will often result in cloudy pool water, so use clarifier to correct this problem.
Brush the walls every week during swimming season while the pump is turned off. A vacuum removes the debris that collects on the bottom. Vacuuming requires moving the vacuum head over the debris on the bottom of the pool until the bottom appears clean.
How Long Will a Concrete Pool Last? A concrete pool should last decades (we're talking 50 years or more) if it is properly maintained. While the shell of the pool can become damaged if the building was not done correctly, a well-constructed concrete swimming pool should last a lifetime.
Mineral Buildup
Shades of yellow can be a sign of excessive iron. Iron can be introduced into a pool by well water or pipe corrosion somewhere in the pool system. Unlike algae, iron deposits resist scrubbing and take a lot of elbow grease to remove. A simple water test will confirm the presence of iron in your water.
The cause of yellowing steps is most often mustard algae, which can leave powdery yellow, green or brown deposits along your pool walls, steps and in shady spots beneath the water's surface.
Mineral Stains: Calcium, in hard water areas, likes to come out of solution, mix with dirt and oils, and deposit itself onto steps as a gray or brown-ish discoloration. You may notice this in conjunction with a high pH level, or after shocking the pool.
For the most part, yes. It can be unattractive and it should be addressed, but it is mostly safe to swim in cloudy water. The only exception would be if the pool is cloudy because there are too many chemicals in it. This pool water would be unsafe to swim in and should be avoided.