Use a diluted vinegar solution. Mix half white vinegar and half water. Rub the solution on in circular motions with a rag or toothbrush. Once finished, rinse and buff dry.
Restoring Nickel Door Handles
Place the hardware into your bucket of warm water/vinegar/soap solution and leave it there for 30 minutes or so. Then take out, rinse with clean warm water and then dry. This should loosen any dirt and can be used on a variety of hardware, such as door hinges, escutcheons, and letterboxes.
To remove mineral deposits, Parobek recommends using a half-and-half solution of vinegar and water, followed by a thorough rinsing and then drying with a soft cloth.
Cleaning chrome and nickel hardware
A mixture of salt and lemon juice or commercial cleaners can be used to clean chrome and nickel hardware. You will need to clean bright and polished metals more frequently to preserve the shine.
The material of your door handle determines what kind of cleaner should be used on it. A gentle solution of two-part dish soap or vinegar, to one-part warm water, can be used on all surfaces and types. You can even polish solid metals like brass or nickel with a cut lemon.
Vinegar and Bicarbonate of Soda
The vinegar will remove heavy tarnish, and the bicarbonate of soda will lightly buff your silver to a wonderful shine!
If you're looking to save money on restoring your steel, common household items that help with tarnish removal include: Olive oil. Vinegar. Baking soda.
Delta®: Avoid abrasives and polishes, including bleach-based cleansers. Delta specifically states to avoid Scrubbing Bubbles, Lysol Basin Tub, Soft Scrub and Tile Cleaner (avoid on the brushed nickel – it probably works just fine on tile/tubs/sinks).
Brushed nickel kitchen faucet
Just a little Bar Keeper's friend on a damp cloth will polish the kitchen faucet and accessories very well.
Tarnished door handles may result in a messier look, causing many to become disheartened. It often affects brass, chrome, steel, and nickel door handles, but thankfully, cleaning tarnished handles is not as difficult as you may think.
Fill a small bowl with one part white vinegar and three parts water. Use a fresh microfiber cloth to thoroughly wipe down the fixture. The white vinegar can help restore shine to the finish, and also descale any remaining buildup.
Don't use abrasive, alcohol-based, acid or solvent-based cleaners on brushed nickel. These cleaners can damage the finish. Although vinegar does contain acid, you can dilute it for use on stubborn mineral deposits if other methods haven't worked. Do this carefully and by testing an inconspicuous area first.
Directions for Cleaning Brushed Nickel Fixtures:
Spray Simple Green Pro HD Heavy-Duty Cleaner onto the surface. Scrub. Use a wet, soft toothbrush to scrub, paying close attention to crevices. Rinse.
Avoid bleach. Do not use cleaners that contain alcohol or ammonia to clean brushed nickel. Abrasives should never be used as they may affect the finish.
Regular Care. Nickel and Chrome are generally quite low maintenance, but the finish does benefit from occasional cleaning with warm, mild soapy water and a soft, non-abrasive cloth. Then give it a good wipe over with a lint free cloth to dry - it is important to do this quite quickly to prevent water marks from forming ...
Beside high-gloss surfaces, the label warns not to use the product to clean polished, brushed or satin surfaces -- such as brushed-bronze or satin-nickel faucets -- or stainless steel.
Pour your coins into one bowl and fill with cold water until the money is well covered. In the other bowl, pour about 1 teaspoon of baking soda. Dip the toothbrush into the bowl of baking soda and scrub the coins. The baking soda should remove any dirt and grime and won't scratch the metal.
BKF cleans and polishes most hard, nonporous surfaces. However, never use BKF on the following: cast iron, granite, marble, wood, fabric, leather, or painted surfaces. Although many of our fans have used BKF on mirrors, gold, and silver (sterling silver is OK), we advise against it.
#2 Tends to tarnish faster than polished chrome
It is important to note that brushed nickel does not tarnish easily. However, when it does, brushed nickel tarnishes faster when compared to polished chrome, especially when the fixtures are not maintained.
Both chrome and brushed nickel are corrosion resistant, though nickel can tarnish more easily. Chrome and brushed nickel are both durable finishes, but each is susceptible to wear and tear depending on the application of the finish to the metal, as well as its care and cleaning.
Scrubbing Bubbles can cause discoloration to some plastics, so while it can be used on the exterior of the toilet and the seat, you're better off sticking with the Windex Multi Surface Cleaner for those parts.
It depends on the type of metal, gemstones, and dirt or tarnish on the jewelry. In general, hydrogen peroxide can help remove some stains, dirt, and grime from metal jewelry, such as silver, gold, and platinum.
To tackle items with significant corrosion, submerge your rusty tools or knives in a bowl of white vinegar and let them sit overnight or as long as 24 hours. Once they have had a good soak, remove them from the vinegar and scrub the rust off with steel wool, a scouring pad, or a wire brush.
This acidic quality also makes it great for removing rust. For this method, you'll need vinegar, a container and a scrubber like a scouring pad or toothbrush. For lightly rusted metal or small areas, soak your pad in the vinegar. For heavily soiled or large areas, soak the metal in vinegar for up to 24 hours.