Mix Solution of dish soap and water, and use a brush to scrub the pavers clean. Make sure to rinse the pavers thoroughly afterward. This process may need to be repeated for tough stains. A recommendation is to do this every few months.
Keep It Simple to Clean Natural Stone
You can use any type of mild soap detergent, such as dish or hand soap, and mix it with a little water. Wet the stone first, and then use a bristle brush and soap solution to wipe the stone clean. The last step is to make sure you rinse thoroughly.
In most instances, using a basic mixture of soap and water will be enough to clean any dirt and debris off your natural stone. To do so you, mix a bucket of warm water with an acid-free washing-up liquid to avoid any staining or discoloration.
Dilute white vinegar with water in a bucket, at Walmart (a 50:50 solution is fine), and apply this natural, eco-friendly cleaning solution to the paving slabs with a firm brush and rinse thoroughly.
To clean paver slabs, you can use a detergent, such as Dawn, or a vinegar-water solution that is gentle enough to effectively clean without causing damage to your concrete pavers.
There are useful tools for cleaning paving stones, such as joint scrapers, sweepers, and pressure washers. In addition, pavers can be cleaned with a small pickaxe, broom, and garden hose.
It's essential to only use cleaners which are appropriate for natural stone surfaces. This means avoiding using vinegar. Stones like limestone, marble, or travertine will react to vinegar because it's an acidic cleaner with harsh effects.
Apply a paste of baking soda and water over the stain and leave it for 24 hours. Gently scrub the area and rinse it with plain water. Stains on Sandstone pavers, Travertine floor tiles, and Marble floors can easily be cleaned with a baking soda solution.
Use a detergent such as Dawn or Ajax dishwashing liquid mixed with water to brighten a concrete patio that hasn't been cleaned in a while. Just as you would regularly vacuum the floor and dust your furniture inside your house, you should keep your patio clean so it's ready at a moment's notice to entertain.
Clean stone surfaces with warm water and a mild soap such as a clear Dawn Liquid Soap. Do not use products that contain lemon, vinegar or other acids on marble or limestone.
Maintenance and Cleaning of Natural Stone Surfaces
Marble and granite are easier to maintain than you'd expect. Warm soapy water and a soft cloth will clean and shine on both surfaces. You can also clean with a stone specific cleaner formulated to be gentle and effective on stone surfaces.
DON'T: Use harsh or abrasive cleaners and sponges.
Windex; acidic cleaners, like vinegar, lemon, lime; or anything with ammonia or bleach should be avoided. Frequent use of these chemicals will dull and weaken the sealant over time.
Scrub off the stains and the vinegar with some good old soap and water. Simple Green is one of the best cleaning products for dirty pavers. It doesn't have any harmful chemicals that could possibly warp your precious driveway.
It is common to mix bleach with water; however, you can also add other ingredients to make it more effective. Similar to cleaning pavers with muriatic acid, avoid an intense concentration of bleach, as it can damage the pavers.
Simple Green Granite & Stone Polish is safe for use on granite, marble, travertine, limestone, porcelain, ceramic, quartz, Corian®*, Silestone®*, and other natural and engineered stone surfaces.
Magic Erasers are bad for natural stone surfaces
Magic Erasers will damage your natural stone countertop or even your floor. If you have polished marble or granite countertops, or even natural stone tile, don't use a Magic Eraser to clean it, according to Countertop Specialty.
And in this case, this mixture does not work well with the natural stone countertops. Due to the fact that vinegar is acidic substance and baking soda is caustic, the result of mixing the two can have an unstable effect on stones that are porous.
Rinsing is not necessary! If you're simply using a vinegar and water solution to wipe and disinfect, you won't need to rinse. However, if there's also plenty of dirt and grime you're wiping away, you may also want to rinse with some extra water.
The safest liquid to try first is water with a little dish soap. Soak your finds in soapy water for a day to loosen any packed-in dirt, and wipe or brush them clean. An abrasive toothpaste can also dislodge grime from smaller surfaces. Many collectors choose to remove calcite from rock and mineral specimens.
Generally, interior pavers that have been grouted and sealed just need to be swept, mopped, and spot-cleaned as needed with a gentle, non-acidic multipurpose cleaning solution, such as Enviro Klean All Surface Cleaner or Light Duty Concrete Cleaner. Exterior paver patio hardscaping is even more low-maintenance.
Can you power wash pavers? Power washing (also known as pressure washing) is also a very effective method by which you can remove dust deposits and various stains from your pavers. Just make sure that the water jet is not directed directly at the joints between the paving stones.
Then, move to a household cleaner. A dish soap, like Dawn, is a safe place to start. The surfactants in dish soaps are designed to remove oil and grease, they're gentle enough to be used without issue on your pavers. In a bowl or bucket, mix the soap with water and pour it onto the stain and agitate.