How to clean limescale from a toilet with coke?

Author: Miss Madeline Tillman  |  Last update: Tuesday, June 24, 2025

Follow these two simple steps below to ensure your toilet sparkles:
  1. Pour Coca-Cola along the edges of the toilet bowl and leave it, preferably overnight.
  2. In the morning, flush and give it a whirl.

How long does Coke take to dissolve limescale?

Clean Your Toilet Bowl with Coca Cola

To try this method, simply pour one litre of Coca Cola into the toilet bowl and leave it to sit for an hour. This gives it time to work its magic. Come back an hour later and give the toilet bowl a thorough scrub before flushing and you'll find no more limescale!

How do you remove encrusted limescale from a toilet?

Vinegar and Baking Soda: - Pour about 2 cups of white vinegar into the toilet bowl. - Add 1 cup of baking soda. - Let the mixture sit for about 30 minutes to an hour, then scrub with a toilet brush and flush. Commercial Limescale Remover: - Use a product specifically designed to remove limescale.

Is it safe to use Coke to clean a toilet?

Coca‑Cola contains phosphoric acid, a safe food ingredient used in some of our beverages which can help clean off dirt. However, because Coca‑Cola is a beverage, not a cleaning agent, it isn't effective at killing germs, and there are lots of products that are much better at cleaning.

Will Coke clear a blocked toilet?

Pouring Coca-Cola down the drain to clear a clog is not recommended. While Coca-Cola contains acids and carbonation that can help break down some types of buildup, it is not an effective or safe long-term solution for clearing clogs. Here are a few considerations:

DUMP Coke in Your Toilet and WATCH What Happens [GENIUS?]

How to remove brown stains in toilet bowl?

For older stains, using an industrial-strength cleaner like CLR should do the trick. Another less conventional strategy you can try is removing the stains with Coca-Cola. To do this, simply pour a full can of Coke into the toilet and let it sit in the bowl overnight. Then flush the toilet the next day.

How to clean a really bad toilet?

Mineral Deposits (including limescale): Use vinegar, a pumice stone, or a commercial cleaner designed for mineral deposits to remove them. Dye Stains: Flush immediately and scrub with a toilet brush. For set-in stains, try a baking soda paste or diluted bleach.

How long to leave coins in Coke?

STEP2 - Pour out a glass of your cola. STEP3 - Cover one side of each coin with Blu-Tac but leave the other side open. STEP4 - Pop your coins into your glass of coke. STEP5 - Sit back and wait but you should be able to see a difference in the colour of your coins within about an hour.

Can you mix Coke and vinegar for cleaning?

Mix Coca-Cola, vinegar and salt and you will get the best cleaning agent for the bathroom, sink, kitchen, dishes and other surfaces. Removes scale and deposits and disinfects. Better than store-bought chemicals and cleaners. The best DIY home tricks.

How do you remove hardened limescale?

How to get rid of limescale on tiles and plugholes
  1. Apply vinegar or lemon juice directly onto a cloth and scrub the limescale until it comes away.
  2. Alternatively, mix one part lemon juice or vinegar to four parts water. ...
  3. Polish the tiles or plughole with any remaining solution until completely clean.

How do you get rid of heavy calcium deposits in the toilet?

Use vinegar or another acidic cleaner to clean calcium buildup from your toilet. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.

Does WD-40 remove limescale from toilets?

While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.

What is the best hack to remove limescale from a toilet?

Citric acid

It's very easy to use: just drop two tablespoons of citric acid into the toilet, let it work its magic for about 20 minutes, scrub with a brush and then flush. Not only does it remove limescale, it also gives the toilet a pleasantly fresh scent.

How do you get hard brown limescale off a toilet?

The acidic values of vinegar allow it to soften limescale and prepare it for scrubbing clean. Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush.

Will coke remove limescale from the toilet?

Vinegar essence is therefore a better choice for harder-to-treat limescale – but it should always be diluted with water. Always wear gloves when cleaning with vinegar to protect your skin from the acid. A special tip: Coca Cola – this fizzy drink contains phosphoric acid which also removes limescale and urine scale.

Which soda cleans pennies the best?

Coke and off-brand colas will quickly remove the tarnish. Just don't drink the coke afterward. Coke contains phosphoric acid that cleans the oxides. Try a variety of citrus juices to see which works best or simply let your pennies soak in lemon juice.

How long do you leave silver in Coke?

Place the silver pieces that you want to clean in a bowl or container and pour over the coke or soft drink of choice. Allow the items to soak for between one and three hours depending on their condition. Then remove them and rinse thoroughly in clean water.

What do professionals use to clean coins?

According to research professor Vinod Patel, washing common coins with natural white vinegar and iodized salt in distilled water is a non destructive way of cleaning them.

How do professionals clean toilets?

Professional cleaners often use the same household supplies as you would: toilet-bowl cleaner (or bleach), disinfectant wipes, rubber gloves, as well as a nonscratch scrub sponge, a microfiber cloth, or paper towels. A handheld scrub brush or a pumice stone can get to especially tough stains.

What not to use on porcelain toilet?

Choose cleaning products that are designed specifically for cleaning toilets. Avoid using abrasive cleaners, bleach, or other harsh chemicals that can damage your toilet's surface.

What's the best thing to clean a badly stained toilet?

Vinegar and baking soda: Add 1 or 2 cups of vinegar to the toilet bowl along with a few sprinkles of baking soda. Swish the solution around the bowl with your brush for a few minutes and then let it sit for about 15 minutes. Scrub the stains with your brush (or pumice stone).

Can you put a dishwasher tablet in the toilet?

Who knew that dishwasher tablets could help keep your toilet sparkling clean? Just drop a dishwasher tablet in toilet bowl and let it sit for 10-15 minutes. Then, use a toilet brush to scrub the bowl and flush it. The tablet will help to break down any stains or buildup in the bowl, leaving it fresh and clean.

How to get a toilet bowl white again?

Vinegar and Baking Soda Solution – If you want a natural solution for cleaning toilet bowl stains, made with vinegar and baking soda, start with the vinegar. Pour a cup in your bowl and swirl it around with the toilet brush. Then add 1 cup of baking soda and another cup of vinegar. Leave to soak for up to 30 minutes.

Can diabetic urine cause mold in the toilet?

More frequent trips to the toilet for folks with sugar-rich urine can spell trouble when it comes to persistent mold rings. While the extra toilet cleaning is a hassle, it can actually be a blessing in disguise if it helps you catch a diabetes warning sign early on.

Previous article
What is the longest lasting insulation?
Next article
Can a tower fan cool a bedroom?