If your interior doors are painted, wipe them gently from top to bottom with a mix of warm water and soap or an all-purpose cleaner. Try cleaning a small spot before wiping the entire door to make sure that you don't remove any of the paint.
A diluted solution of mild dish soap and water is suitable for cleaning most surfaces, including your painted white doors.
You can also use a bleach solution of one part bleach to three parts water. Clean the door with soapy water. Use a degreaser to remove sticky residue left by tape. Allow the door to dry completely before painting.
No matter the surface, it is easiest to always use a good dish soap and water to dilute it for your cleanser. All-purpose cleaner, wood cleaner, and white vinegar are also suitable alternatives. But if you're not sure and you want to be safe, it is best to stick to good old soap and water!
Dampen a cleaning cloth with water, and wipe in an inconspicuous area to ensure water won't damage or stain the paint. Glossy-looking finishes are almost always safe to clean with water, while matte finishes should be tested first. No matter what the finish, it's best to avoid over-wetting the surface.
Get yourself a bowl of warm water and add a small amount of mild dish soap. Using a clean and non-abrasive sponge, scrub your door to remove any minor marks or dirt. Always remember to wipe around the edges of the door too! Once you're done, always make sure there is no soap left on the surface of the door.
Add 1 tablespoon white vinegar to 2 cups warm water to make a general cleaner good for painted surfaces. Add a squirt of liquid dish soap for extra cleaning power, if desired.
Spray each piece lightly with Windex and wipe carefully with a clean cloth—and a cotton swab for smaller crevices—to restore to a sparkling shine. Don't use on painted or tinted pieces, however, as this may remove the pigment.
“Painting a front door is best done with a brush. This is because most front doors have wood and/or glass panels and a roller would not be able to paint in the panels the same way that a brush would to give full coverage.”
Vinegar makes an excellent wood cleaner because it won't damage wood finish or warp wood like other products do. Cleaning with vinegar is a green alternative to the sometimes toxic and expensive cleaners offered at the store.
Dirty walls
Wipe with a very lightly dampened sponge, dipped in a solution of washing-up liquid. Don't rub hard or you may damage the surface. To make cleaning easier, consider using washable paper or paint. Heavily soiled paintwork can be washed with a sugar soap solution and rinsed with clean, clear water.
CLEANERS FOR BASEBOARDS & TRIM
If painted, your wood trim requires mild soap and water. Use a mild, natural wood cleaner on clear-coated or stained wood trim. If the wood has excessive buildup, add paint thinner to your solution to help, according to This Old House Magazine.
The best way to clean walls painted with latex paint is to use warm water and a nonabrasive all-purpose cleaner. Dip a clean sponge in the water, then wring it dry. Gently rub the wall. Pay special attention to areas that get touched often, such as around doorknobs and light switches.
Mix one cup of white vinegar into a bucket of warm water, and use a soft sponge to tackle stubborn stains. You can also try using washing-up liquid and warm water. For glossy finishes, which are less durable when it comes to cleaning, avoid harsh substances and consider using heat instead.
For a wood coated with a hard surface, like wooden furniture, Windex is completely harmless. If it is sprayed on and kept dry, it will leave a water spot, which could be cleaned off. It won't damage your furniture when used as a cleaner.
It is good to avoid applying glass cleaner on unprocessed wood or a table. This could damage the polish of your wooden furniture. Instead, you can prepare a homemade solution using vegetable oil and white vinegar.
Unless your wooden furniture has a plastic coating, don't ever use all-purpose cleaner on it. All-purpose cleaner is too wet and may also contain ingredients that will discolor or otherwise harm your wood over time.
The vinegar should not dry out on any surfaces, but should be wiped off with a clean microfiber towel as soon as possible. The use of vinegar on car paint will dull and damage the paint, so it should not be used.
For most painted walls, warm water and dishwashing detergent will work well, but if your walls need more substantial washing, add one cup of white vinegar to a bucket of warm water. Vinegar will not be harmful to the paint on the walls, so do not worry when applying how to clean the stain on the wall with vinegar.
Murphy Oil Soap hardwood and wood cleaner is specially designed to clean both finished wood and non-wood surfaces so they maintain their beautiful shine at all times. The Murphy Oil Soap wood cleaner aims to bring out wood's beauty in a gentle and natural way (98% Natural Wood Cleaner.
Surfaces that Should Not Be Cleaned with Vinegar
hardwood floors, wood furniture, and other word surfaces – due to its acidic nature, vinegar can damage hardwood floor finishes, causing them to look dingy. Use either a cleaner specifically made for hardwood floors or a mix of soap and water.
Yes, it works. I have used sugar soap solution a couple of times to clean my furniture. And to my surprise, it not only helped in removing the dirt and grime, but also the old wax polish. You can therefore use sugar soap for removing the wood wax to make it ready for painting, staining, or varnishing.