Try mixing a weak solution of water and dishwashing soap. Dip a soft cloth in the solution, wring it out and wipe the entire piece. You want a damp cloth, not a wet one. Don't saturate the wood, and rinse your cloth often.
Begin by creating a diluted solution of warm water with mild dish soap. Or for an even gentler clean, opt for white vinegar - a good ratio to work with is 240 ml (1 cup) of water to 45 ml (three tablespoons) of vinegar. Next, clean any dust off the table and chairs by wiping it down with a cloth.
Waxing Guide:
You may wax your piece of furniture as often as you like, although we would recommend regular waxing in the first few months. We would recommend that at least a monthly wax for the first 3 months will be needed, as it acclimatises to the heat of your home.
EVERY 3 TO 6 MONTHS.
Use a mix of equal parts distilled white vinegar and extra-virgin olive oil. Use a soft cloth to rub the mixture with the wood's grain and then wipe off with a clean cloth.
A solution of warm water, vinegar and about five drops of dish soap can clean and disinfect the furniture if soiled. Remove dust and protect using a soft cloth and non-abrasive furniture polish. Avoid polish build-up by applying furniture polish sparingly to a soft cloth and gently wiping wood surfaces.
You'll need to wax your furniture at least every six months, to nourish the wood and form a lasting seal for your furniture. This may sound daunting, but it's worth it, to help your furniture really last a lifetime. Waxing protects the grain, and makes the wood crack resistant, keeping any finish in the best condition.
Add some dish soap, and dampen the cloth with warm water. Wipe down the counter, and reapply dish soap if the suds run out before you finish the whole counter. Afterward, thoroughly rinse out your cloth until the soap is gone. Rewet it with warm water, and use it to rinse the soap suds off the countertop.
It isn't a good idea to clean wood with pure, undiluted vinegar. In addition to leaving water marks, the acid in the vinegar could “eat” certain kinds of finishes. However, for polishing wood, a homemade treatment of half olive oil and half white vinegar can buff up stained and oiled wood finishes nicely.
hardwood floors, wood furniture, and other word surfaces – due to its acidic nature, vinegar can damage hardwood floor finishes, causing them to look dingy. Use either a cleaner specifically made for hardwood floors or a mix of soap and water.
Wax gets dull over time and needs to be reapplied very often, so it is not a good choice for furniture overall. If you are talking about wooden objects that you keep in your home on display, then wax is a good choice. For outdoor wooden objects, oil would be the best finish since it is much more resistant to heat.
What are traditional wood oils? Whilst there are many 'old school' wood oils, the most commonly used are without a doubt Danish oil, Teak oil, Tung oil and to a lesser degree Linseed oil. There is no set formula for Teak or Danish oil meaning that they can vary from brand to brand.
Beeswax has many benefits to wood, not only does it help maintain and keep wood in good condition, but it also cleans wood, polishes and protects the wood from stains and spills. This is why beeswax is one of the most popular furniture polishes.
It is vital that you protect your table from moisture and heat, so make sure your coasters are stored close or on your table ready to use. Don't place hot or cold plates or serving dishes directly on your table, instead use a placemat to protect your table. Wipe up spillages off your table as soon as you notice them.
There are many wood oils that can be used on table tops but for the best durability and longevity, we recommend 'Hard Wax Oils' such as Manns Premier Top Oil or Osmo Top Oil. Hard wax Oils are quick and easy to apply, maintain and repair.
Generally, you will need to apply your oak furniture oil once or twice a year depending on the temperature and humidity of your home. We recommend Becker Acroma oil, linseed oil, tung oil, or Danish oil which can be purchased here in our catalogue of oak furniture wax and oils.
When you're doing a DIY woodworking project, it's a good idea to start with a fresh, clean surface. But whatever you do, if you're working with untreated wood, don't use a Clorox wipe to clear off dust and dirt. Because untreated or unpainted wood is porous, disinfectant wipes can leave it with a big, ugly stain.
Lysol disinfecting wipes are specially formulated to be safe on most finished wood surfaces such as cabinets, tables, and floors. However, they aren't recommended for untreated, unpainted, or unfinished porous wood surfaces. It's always best to do a quick spot test before applying wipes to your wood furniture.
A simple solution of half a cup of distilled white vinegar, half a cup of warm water and a teaspoon of mild dish detergent like Dawn will also do the trick. Be sure to test the mixture first in a hidden area of the wood to make sure it does not damage the finish.