In most cases, a cloudy pool after shocking is only temporary and should clear up within 24 hours. Keep filtering your pool, add a little clarifier to help, and your pool should be clear in no time. If after 24 hours your pool is not clear, then you may need to look a little deeper for the solution.
How long does it take for a cloudy pool to clear? Depending on how cloudy your water is, it may take 2-3 days for your water to clear. If you're using a clarifier, you'll need to run your filter 24/7, keep your water chemistry balanced, and add the proper amount of water clarifier every other day until it's clear.
But if the cloudy water persists long after you've shocked the pool, you're likely having an issue with water balance, circulation, or filtration. Heavy use of a calcium based pool shock (cal-hypo) may increase Calcium Hardness over a period of time, increasing your odds of cloudy water.
It's pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn't be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.
Chlorine issues often cause cloudy water. Adding a recommended dose of pool shock to your pool can clear it right up. Poor circulation or filtration can contribute to cloudy water. Make sure your pump and filter are working properly.
It's not a good idea to use pool shock at the same time as clarifier. Some clarifiers are polymer based and the shock can act to break up the polymer causing the clarifier to be ineffective. It's best to shock your pool before and wait a day or two before adding clarifier.
When the pH levels are imbalanced, it renders the free chlorine ineffective and the levels decrease. Too little free chlorine forms chloramine and it is this combined chlorine that results in your pool's cloudy appearance.
Skim the top of the pool for debris that may have settled on the pool surface. Add one pound of diluted granular shock to the water for every 7,000 gallons of pool water. Run the filter for 24 hours and retest the water. The slimy looking film can be an early onset of algae.
Some people may suggest using baking soda as a quick fix if alkalinity is high, but it is not a reliable pool chemical. Chlorine should be the only substance used to clear a cloudy pool.
What happens if too much shock is added? You cannot overshock a swimming pool or add too much. Adding too much shock or overshocking your pool will kill off algae. The negative of adding too much shock is it will upset the chemical balance of your pool.
A clarifier requires less work and less water but can take to two to three days to achieve the results you are looking for.
If you see white flakes it is actually not paint but may be either calcium scale deposits or biofilm residue in your pool due to bad pool chemistry. Calcium scale deposits occur when your water has too much calcium. The white flakes may be calcium deposits that have accumulated over time.
Water Mold is a whitish, mucous-like substance that looks like shredded tissue paper when floating in the water. It is not harmful to humans, but is unsightly, and can clog equipment. Water mold usually begins in the filter lines, and by the time it becomes visible, the growth is often quite heavy.
Swimming pools use chlorine as the main sanitizer. This chemical is responsible for keeping the water free of bacteria, which helps prevent algae and other problems associated with a dirty pool. A film can form on the water from a combination of body oils, lotions, and dirt that build up due to heavy usage.
But is it safe to swim in a pool with algae? Whether mild or severe, it isn't recommended. Significant amounts of swimming pool algae welcome a breeding ground of harmful bacteria that feed on algae. These bacteria pose health risks to swimmers, most commonly resulting in a skin rash.
Here is why: Sunlight is white, which is made up of all the colours of the spectrum. The molecules in pool water absorb light from the red end of the spectrum when sunlight falls on the water. By removing the red, the light which ends up being reflected has a slightly blue hue which can vary in richness by water depth.
A pool turns green when there is algae in the water. There are several reasons why algae could grow, but it is most commonly caused by prolonged exposure to the sun, rain and temperature spikes. These factors affect the chemical balance of the pool and result in the pool turning cloudy and/or green.
You may need to make sure your pool filter is running correctly and is the right size for your pool. Sometimes, you may need to change your pool filter to make sure you're getting crystal clear pool water. You might also want to try a flocculent, such as aluminum sulfate.
Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity. Many commercial pool products for raising alkalinity utilize baking soda as their main active ingredient.
Baking Soda
Most remedies call for adding additional chlorine into the water. If your water's pH balance is between 7.2 and 7.5, however, you can add baking soda to the water to help clear it up. This serves as a replacement for chlorine because baking soda is a natural cleaning agent.
The simple answer is No. Baking soda cannot be used to clear up a cloudy pool because it is a base. Bases raise PH levels, which causes the water to turn cloudy. Some people suggest using baking soda as a quick fix to high alkalinity levels, but it's not reliable as a pool chemical.