Combine 4 cups of water with 1/2 cup of ammonia and 1/4 cup of dish soap in a cleaning bucket or large spray bottle. Apply the cleaner to the bricks. Scrub with a natural bristle brush.
Mix Dawn and baking soda into a paste to clean detailed brickwork. For old brick, always try the least abrasive method and work your way up. Use a sturdy bristle brush when it comes to fireplace brick cleaning.
Usually, hosing them down once a month is sufficient. Use soap and water, if the pavers are still dirty after sweeping and water hosing, make a solution of soap and water. You can use dish soap, laundry detergent, or any type of general-purpose cleaner. Never use bleach on your pavers, as it can damage the surface.
You can restore patio bricks by first evenly and thoroughly pressure washing the bricks then letting them dry for a day or two. After they're dry, apply a polymeric jointing sand between the stones. Finally, sweep off the excess sand and apply a paver sealer to enhance the natural colors of the brick.
Combine a tablespoon of bleach with a gallon of warm water in a bucket, then apply the bleach with a sponge to the brick. Use a scrub to tackle hard-to-reach areas or difficult stains.
To clean paver slabs, you can use a detergent, such as Dawn, or a vinegar-water solution that is gentle enough to effectively clean without causing damage to your concrete pavers.
Cleaning brick pavers
Cleaning pavers with vinegar is a great way to get rid of stubborn moss, algae and stains on brick.
Pour baking soda on the stained spot, then add a bit of warm water. You can add some detergent or white vinegar for a stronger vinegar solution. Let the mixture sit for at least 1 hour. Scrub the top of the pavers, with extra attention to the gaps between the stones or bricks.
Cleaning bricks with vinegar is an effective and natural way to remove dirt and stains. However, it is essential to follow proper techniques to ensure the brick surface's safety and achieve the best possible results.
If you don't have the supplies for the ammonia mixture, you can also use bleach or hydrogen peroxide to remove mold, mildew, and stains. Remove dirt and debris using the broom. Put on safety gear. Pour ½ cup of bleach or hydrogen peroxide in a spray bottle with 3 cups of water.
WD-40 may remove paint stuck to brick if applied directly and in large quantities, allowing it to sit on the surface for a few hours.
Muriatic acid is a powerful and corrosive acidic liquid made from hydrochloric acid, water, and other trace minerals. This product is a very strong acid that will clean dried cement products off stones, bricks, and other masonry surfaces.
Bricks. The acid content in vinegar is particularly good at breaking down the molecules in clay surfaces. Standard bricks are made mostly from clay, so exposure to undiluted vinegar will quickly result in discolouration and a sticky chemical byproduct coating your bricks.
Mix equal parts water and white vinegar in a bucket or spray bottle. Add a few drops of liquid dish soap for tougher stains. Apply the cleaning solution to the patio surface, either by spraying or using a brush. Allow the solution to sit for 10-15 minutes to break down dirt and stains.
Fill up a gallon sized bucket with water and add about 16oz of dish detergent. Mix the soap into the water thoroughly. Once your cleaning solution is ready, gently pour some onto your paver surface, working in small areas at a time. There are also specific cleaning solutions.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
It is common to mix bleach with water; however, you can also add other ingredients to make it more effective. Similar to cleaning pavers with muriatic acid, avoid an intense concentration of bleach, as it can damage the pavers.
Paint the Brick
Painting the brick is the most extreme solution for a dark brick exterior, but it brightens the look. It's a good option when you don't like the brick color at all. Neutral paint colors ranging from white to taupe tend to look best.