If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps. Note: If the lock is muted, you will not hear the lock beeping. Delete User Codes:The lock is pre-programmed with a default User Code of 1-2-3-4.
Press the PROGRAM button once, enter your new 4 - 8 digit code and then press the LOCK button. 2. Press the PROGRAM button twice, enter the same or a new code and then press the LOCK button once. If your old code still remains in the unit, you will need to perform a hard reset of the unit.
Press and hold the Reset button for 5 seconds, until you hear 3 long beeps.2. Enter the default Mastercode (O-O-O-0).3. Press the lock button. You will hear one beep.4.
1) A programming code enables you to make changes without needing to access the programming button. This is ideal for landlords to allow programming from the outside, without access to the interior program button.
You can identity the type of Kwikset lock you have by locating a small vertical slot on the plug. This is located to the left of the cylinder's keyway.
While similar products Kwikset 913 Smartcode Electronic Deadbolt and Kwikset 909 SmartCode Electronic Deadbolt having this feature, Kwikset 264 Contemporary Keypad Deadbolt is again staying one step behind when compared to these locks. You can still have it rekeyed by a locksmith.
If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps. Note: If the lock is muted, you will not hear the lock beeping. Delete User Codes:The lock is pre-programmed with a default User Code of 1-2-3-4.
Key codes are found on the side or the bow of the original key that came with your new lock. Some brands do not stamp this code on the side of their keys. If this is the case the only way to get that code is with a key gauge.
Two possible issues: The lock was not removed completely from another network before being paired with the new network. Follow your smart home system's instructions to remove (exclude/unpair) the device from any other network. Then, attempt to pair (add/include) the lock again.
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
Unlocking from the inside of the door is done manually by turning the thumb turn. Locking and unlocking from the outside can be done automatically by an electric motor. As the last number of a correct code is pressed on the keypad, the electric motor swings into action and retracts the deadbolt.
Re-keying a new lock to match an existing Kwikset key is simple and easy. And all Kwikset pin & tumbler locks can be re-keyed to achieve convenient one-key operation across multiple locks. All you need is a Kwikset Re-keying Kit, a Kwikset key, and a pin & tumbler lock.
Yes, the original key is necessary to use a rekey kit when rekeying a lock. If you do not have the original key, you can choose to hire a locksmith to make a new key or you can replace the lock.