Cleaning Grout with Vinegar Pour or spray undiluted vinegar onto your grout and let it sit for 10 minutes before using a toothbrush, scrubbing in a circular motion. Next, rinse away the dirt and mildew. You can also use white vinegar to clean soap residue, mildew, and grime on non-porous tile surfaces.
DO NOT USE VINEGAR. Vinegar is acidic and will seep into the pores of the grout and destory it slowly over time. Use a grout haze remover.
Some professionals swear by a simple mixture of baking soda and peroxide to clean grout. Hydrogen peroxide is an acid, and baking soda is a base compound. Mixing the two together creates a reaction that can penetrate the grout lines and free dirt and debris.
Spray the grout with a 50/50 mixture of white vinegar and water. I used a tooth brush to do some scrubbing, you can use a grout brush too. Let the solution sit in the grout lines for about 5 minutes, then wipe up and rinse thoroughly.
Instructions: Mix 1/2 cup of baking soda, 1/4 cup of hydrogen peroxide, and a few drops of dish soap to form a paste. Apply the paste to the stained grout and let it sit for about 10-15 minutes. Scrub with a toothbrush or grout brush. Rinse with water and wipe clean. Instructions:
Vinegar's acidic property makes it an effective solution in combating mold. Fill a spray bottle with undiluted white vinegar and apply it directly on the moldy grout. Give it an hour or so to work its magic then scrub with a grout brush. Rinse with warm water and dry with a clean cloth.
Yes, hydrogen peroxide is a natural neutral cleaner that is safe to use on grout. Hydrogen peroxide and baking soda produce oxygenated bleach, which is highly effective for cleaning grout.
Chemical cleaners, such as, Tilex, Soft Scrub, Scrubbing Bubbles, or ammonia products will nearly always result in your tile surfaces' grout becoming very discolored.
Here's a few DIY grout cleaners you can try: Make a spreadable paste with 3/4 cup baking soda with 1/4 cup hydrogen peroxide and 1 tablespoon of mild dish soap. Add more baking soda or peroxide if the mixture is too runny or thick.
If you're trying to clean grimy grout between your bathroom shower or floor tiles, then OxiClean™ bathroom cleaners are here to help! They get rid of grout stains on vertical and floor tiles for a refreshed bathroom.
Combine equal parts hydrogen peroxide and baking soda on the spot you want to clean. It should be making a sizzle sound as the chemicals interact. Then, start scrubbing. The paste should turn foamy, like watery shaving cream.
Apply liberally, let sit for 10 minutes, scrub with a sponge, and rinse with a damp cloth. Spray directly on soap scum, wait 10 minutes, scrub with a brush, and rinse off. Soak a cloth in the solution, wrap around the fixture for 15 minutes, then rinse and dry.
If you're a die-hard DIYer, using Dawn dish soap alone can be a safer option for mild cleaning. Dilute a small amount of Dawn in warm water, scrub the grout with a soft brush, and rinse thoroughly.
Start by combining four parts water and one part white vinegar (hint: add more vinegar to increase the cleaner's strength). Pour into a bucket or spray bottle and apply the water and vinegar mixture to the tile surface. Scrub the area using a cloth, nylon pad, or a mop.
For floors, steam mops are highly effective for cleaning grout. Just like the handheld steam cleaner we tested, a steam mop can clean and sanitize your tile and grout without resorting to harsh chemicals.
Low-pressure steam is a safe, effective grout cleaner. What The Grout Medic's pros use to clean grout is low-pressure, hot water vapor. Our grout cleaning system uses a simple blast of steam to safely expel dirt particles, germs, and bacteria from the porous surface of your grout.
It works on the tile and the grout, effectively cleaning everything from hard water stains to mold and mildew stains to soap scum.
Grout is porous and usually sealed to resist stains. However, acid can degrade these silicone-based sealants, causing them to break down and wash away. Contrary to popular belief, this can happen with just one application of vinegar. Once the sealant is removed, dirt can penetrate the grout, leading to discoloration.
While it may be tempting to leave the cleaner on for an extended period, be cautious, as prolonged exposure can lead to damage, especially if the grout is older or more porous.
To make your own grout cleaner, mix 1 tablespoon liquid dish soap, ½ cup baking soda, and ¼ cup hydrogen peroxide together in a squeeze bottle. Allow the mixture to stand for 7 to 10 minutes, then apply to wall tiles, floor tiles, and countertops wherever the grout is dirty.
Getting in between the tiles is hard but OxiClean™ can make keeping your grout sparkling white easy. Always refer to packaging for directions. MIX Fill to line 4 per gallon of water. For some surfaces, like grout, a more concentrated solution/paste may be needed.
Just a few more important points: As the grout can absorb the soap as well as a stain, do not clean with oil or wax based cleaners (Murphy's Oil soap, Pine Sol, etc.). These products will leave a waxy or oily film in the grout.