In most cases, you will want to drain the pool to be at least 4 to 6 inches below the top of the skimmer. This allows adequate space for expansion of the water throughout the winter without risking damage to the pool.
Drain the water down to no more than 6 inches from the bottom of the skimmer if you plan to use a standard floating winter cover. Use your pool filter, switched to the "Drain" setting, to empty the pool water. Attach a pool hose to the end of the filter opening that leads to your yard's drain to avoid flooding.
Do you need to drain any water when winterizing an above ground pool? The answer hinges on how you protect your skimmer during the winter. If you're concerned about freezing and cracking, and don't use a winter skimmer cover plate, then you should drain the water level below the skimmer and returns.
All you need is a medium-size water or vacuum pump. Unroll the pump's intake hose so that it reaches the center of the pool (or as close to it as possible), and submerge it in the pool. Place the outlet hose so the exiting water doesn't flood the area, but drains off away from the pool.
In most cases, you will want to drain the pool to be at least 4 to 6 inches below the top of the skimmer. This allows adequate space for expansion of the water throughout the winter without risking damage to the pool.
The harsh weather conditions throughout the winter season can create potential damage to more than just the pipes. What happens when you don't winterize your pool is that the water could turn green with algae. If the chlorine system stops functioning, you'll say adieu to the beautiful blue pool you know and love.
As noted, typical maintenance or winterizing your pool shouldn't require you to completely drain the water. You risk damaging your pool liner and the structure of your above ground pool.
You may throw up your hands and decide the best course of action is to drain the pool and start over. In fact, draining a pool should be a last resort. Most in-ground pools will have to be drained and refilled at some point. But cleaning should not be the reason to do it.
The average outdoor spigot on a home can produce up to 12 gallons per minute. A small pool can be filled in a few hours, while a large one can take 14 hours.
In most cases, your pool can even handle rain from most tropical depressions and hurricanes. If your pool is completely full after a storm or heavy rainfall, you don't need to take drastic steps such as emptying your pool. If you do, the hydrostatic pressure can cause your pool to come out of the ground.
These openings are where the pump and filter hook up to the pool and they are both located high up and right next to each other. ... There are three ways an above ground pool can get better circulation. You could get and use an automatic pool cleaner, add a return line or two, or you could have a center bottom main drain.
For proper water circulation, it is best to position the flap so that it is about 2/3 closed. This will allow for more flow through the main drain than through the skimmer, which will promote a "bottom-to-top" circulation throughout the pool.
A pool's so-called main drain is not actually a drain; that is, it is not used to drain the pool. Instead, it is an outlet, housing a pipe that runs to the pump, which sucks water through a skimmer, then through a filter, then through a heater (if you have one), and then back to the pool via multiple inlets.
Helpful tips to keep your pool and its equipment safe during freezing temperatures. Run your pool pump continuously when temperatures are near or below freezing. You don't need to run your heater, moving water likely will not freeze. Disconnect any aerators and lines to slides.
This is why the Intex pools manufacturer strongly recommends draining and disassembling your pool if the temperatures in your area drop to or below 41°F (5°C). And so do we. We don't want your cozy winter by the fire to be ruined by a messy pool collapse.