A magnetic curtain rod is by far the most convenient curtain rod ever designed. It practically installs itself. You simply press it against the door and the magnets grab onto the steel. You don't need any tools or hardware to install these rods.
With magnetic curtain rods, you don't have to drill screws into your wall, so they are easy to both install and remove. And if you properly use adhesive metal strips, you can hang them from almost any wall type.
To simply keep the curtains closed, place the magnets just inside the vertical edge where one panel meets another. To seal all the curtain's edges to the window opening, position the magnets across both sides and the bottom, if not the top of the curtain as well.
Sew one disc magnet 8x3 mm each into the left and the right side of the hem. Attach the curtains on the upper window frame. Pull the sides of the curtains firmly down. Check where the magnets are located in the hem and glue a disc magnet of the same strength with UHU MAX REPAIR next to the window at the same height.
You can close a troublesome gap between curtains and walls by installing a wrap around curtain rod and hanging curtains that are longer and wider than the window they cover. You can attach the sides of your curtains to the walls adjacent to a window using tape, pins, or Velcro strips.
FindTape is often asked if the magnetic tapes will stick to each other, and the simple answer is no. The types of magnetic tape highlighted here are single pole, meaning the tape is NOT attracted to itself – it repels.
To keep the curtains closed, place magnets inside the vertical edge where one panel meets with the other. Seal all the edges of the curtains around the window opening, then place the magnets on both sides and at the bottom.
To add a decorative touch as well as a layer of privacy, you can easily install magnetic curtain rods and curtains over any metal door window.
Purchase 2-3 jumbo command hooks per window. Pick a finish that is the same as the curtain rods you will be hanging. Clean wall surface where you will be applying hooks with rubbing alcohol and clean cloth or paper towel. Clean gently, rubbing too hard can remove the paint.
The caps on tension rods are often made of plastic, but even rubber ones are so incompressible that moist, smooth surfaces such as tile or fiberglass can't hold them. You can fix that by gluing rubber shelf lining material to the ends with strong glue - two-part epoxy or contact cement.
The smaller rod fits into the larger rod, causing a spring inside to compress. When affixed to two smooth, level surfaces, the spring well… springs into action, pushing its energy into the two surfaces and thereby holding the rod in place.
Fabrics are an excellent option to put on the wall if you are using magnets because the material is lightweight. There are different types of wall magnets that serve different purposes and come in different designs.
What are the best glues to use for gluing magnet and fabrics? The best glue to use for gluing magnet and fabrics together is two part epoxy glue, but any other type of super glue adhesive will work just as well. It's important to be carfull when gluing fabric and magnets together.
The tape has a maximum adhesive force of 102 g/cm² (according to specifications in the web shop). Therefore, the maximum adhesive force of the entire strip is 40 x 102 = 4 080 g, ergo approx. 4 kg. For the planned vertical strain between the two tapes you can expect at the most 80% holding strength, ergo max.
Magnets can either attract or repel each other. A permanent magnet is an object that produces a magnetic field around itself. It is this field that enables them to stick to each other and to some types of metal. Specifically, they stick to ferromagnetic materials like iron and things that contain iron, such as steel.
Measuring the length of your track or pole
Don't forget to allow for the fabric to overlap - this is an additional measurement, normally 2.5cm that allows the hanging curtains to overlap in the middle when they are closed. For a curtain track: The measurement should be the length of the track.
Reusing them is as easy as applying a Command™ Refill Strip, so you can take down, move and reuse them again and again! Great for installing curtain rods or hanging wall décor, coats, and bags! Use with rod diameter less than 5/8 in, length less than 48 in, and finial greater than 3/4 in.