Best you can do is invest in some rubber pads to minimize rattling or start tightening things up around the house. Subs by design are going to shake and rattle anything that's loose. Tighten up your cabinet doors or install pads, silicone, felt, etc to just make the rattling inaudible to you.
All you do is screw the damper onto the inside of your cabinet on the hinge side and voila--a quiet closing cabinet door. The way it works is very simple. When the closing door hits the damper, the damper slows the momentum of the door and causes the cabinet door to close softly and quietly. No more headaches.
Soft close hinges and drawer glides will prevent slamming. Not only do these accessories help with noise, but they can also limit the wear on your cabinets and drawers. Soft close hinges and drawer glides have springs or other mechanisms that grab onto the door to slow its momentum.
Get a piece of weatherstripping and put it on the hinge side of the doorframe so the door compresses it when you close it. That puts a bit of pressure on the latch and it will reduce the rattling.
Best you can do is invest in some rubber pads to minimize rattling or start tightening things up around the house. Subs by design are going to shake and rattle anything that's loose. Tighten up your cabinet doors or install pads, silicone, felt, etc to just make the rattling inaudible to you.
Common Causes of Sliding Glass Door Noise
A dirty or damaged track can also hinder the smooth operation of the door, leading to various noises. Checking and cleaning the track regularly helps maintain its condition. Roller problems: Worn or damaged rollers can cause the door to squeak or stick.
The Source of Noisy Kitchen Cabinets
Most older kitchen cabinets were installed with a rubber bumper on the corners of each door and drawer to soften the impact when it closes. Unfortunately, these bumpers wear down and come off over time, and most people don't replace them.
Apply rubber bumpers on kitchen cabinet doors, bathroom drawers, chest of drawers. DRAWER BUMPERS & SOUND DAMPENING CABINET STOPPERS: soft material of Eva Rubber furniture bumpers gives the most effective sound dampening effect than other bumpers on the market like silicon.
6mm Acoustic Rubber Underlay
First, measure the inside of the cupboard and cut the underlay to fit the dimensions. Then, place the underlay on the floor of the cupboard and line up the edges so they are flush against the walls. Finally, secure the underlay in place with staples, nails, or glue.
Rattling doors
This is caused by a gap between the doorstop (a part of the frame) and the door which is providing excess room for the door to move around in. When you find the door rattles when closed in its frame, slightly adjust the latch plate the door latch sits against.
A popular choice that many choose to stop doors making a squeaking sound is to spray the hinge with some silicone. Available at most good hardware stores, it's free from grease and oil and is safe to use on wood, metal, plastic, and rubber.
Sometimes, cabinet doors may become loose or misaligned because they're too heavy for their current hardware. This is often seen with larger doors or those made from dense materials. Over time, the weight of the door can strain the hinges, causing them to loosen or the door to sag.
Note: An alternative to the soft-close hinge is a Soft-Close Adapter. Soft-close adapters are small devices that are installed into an existing cabinet without replacing the hinges. These adapters provide your cabinets with the soft-close experience with less hassle.
For door hinge oil, your best option is to use silicone spray or white lithium grease. Silicone is the easiest, but it does not last as long as the grease. When used properly, the mess is minimal. Remove the hinge pins from the hinge one at a time.
Clicking noises in walls, especially at specific times, could be due to thermal expansion or contraction of building materials, plumbing issues, or even pests. Conducting a thorough inspection or consulting a professional can help identify and address the root cause.
The first thing to do to resolve this issue is to treat the hinges with a spray lubricant. If the hinges aren't dirty, rusty, or coated in paint, the lubricating spray might penetrate through the gaps to the hinge pin and provide enough lubrication to fix the squeaking door.
To prevent noise from making its way through the door, you can follow steps that include: Installing new weatherstripping. Caulking the edges of the door to close small cracks. Add glazing to your glass door (double or triple glazing for extra effect)