How do I set my AC to save money?

Author: Dr. Pasquale Carroll DVM  |  Last update: Thursday, April 24, 2025

The best AC temperature to keep your thermostat set at over the summer is 78 degrees. This slightly elevated setting will help balance your AC costs out, so you are not wasting money on cool air when your thermostat is already low.

What temperature to put AC on to save money?

On work days, you can set the temperature a few degrees higher when you usually leave the house, and then have it start cooling down to your ideal temperature 30 minutes before you return. If you don't have an ideal temperature, the DOE recommends using a baseline of 78 degrees when at home for the most savings.

How do I schedule my AC to save money?

The smaller the difference between the indoor and outdoor temperatures, the lower your overall cooling bill will be. You can easily save energy in the winter by setting the thermostat to around 68°F to 70°F while you're awake and setting it lower while you're asleep or away from home.

What is the most cost-effective way to run your air conditioner?

Increase the thermostat

If you are just as comfortable with your thermostat one or two degrees higher than you currently have it set, go ahead and turn it up. Even a one degree difference will have an impact on your energy bill. Many recommend 78 degrees as a good temperature for air conditioners to run efficiently.

How do I keep my AC bill low?

10 Ways To Reduce Your Air Conditioning Costs This Summer
  1. Running ceiling fans. ...
  2. Plant big shade trees around your house. ...
  3. Install a smart thermostat. ...
  4. Thermostat placement. ...
  5. Think about your basement. ...
  6. Seal off any leaks. ...
  7. Evaluate your home's insulation. ...
  8. Regularly service your AC.

Best AC Setting For Cooling: Best Air Conditioner Temperature to Save Money, Set AC to Auto or On?

What AC setting saves the most money?

The Best AC Temperature to Save Money

The right thermostat setting is very important for summer AC use, but that setting may be higher than you would think. The best AC temperature to keep your thermostat set at over the summer is 78 degrees.

What is the best AC temperature for less bill?

A more moderate setting like 24°C (75.2°F) can achieve comfort with reduced electricity usage.

Does keeping the AC at 72 save money?

Best AC Temperature Settings While You Are Home

As you consider the most comfortable room temperature for your lifestyle and family, keep in mind that for each degree that you set your thermostat above 72 degrees, you can save up to 3% on your energy bill.

Is it better to leave AC on auto or off?

AUTO is significantly more energy efficient between the two modes since the fan is only running when your AC is going through its cooling cycle. This takes less power, which is more budget-friendly, with some estimates showing you can save as much as $50 per month just by keeping your AC on AUTO.

How much does it cost to run the AC for 1 hour?

On average, an air conditioner costs between $0.06 and $0.88 per hour to use. Let's see how much air-conditioning costs every month (assuming it runs for 8 hours per day). The cheapest option is $14.40 per month and $211.20 per month on the high end.

Is 72 a good temperature for air conditioning?

Setting your air conditioning to 72°F is generally considered a comfortable indoor temperature for many people. It strikes a good balance between comfort and energy efficiency, making it a popular choice for residential settings.

How to minimize AC bill?

Tips to reduce AC bills
  1. Switch off when not in use. This is common sense, if practised properly will cut down AC bills. ...
  2. Set the temperature to the ideal level. ...
  3. Sealing the windows. ...
  4. Operate the AC and fan together. ...
  5. Regular service.

Is it expensive to leave the AC on all day?

Leave Your Air Conditioner On

You might think you're saving money by turning your AC off when you step out of the house. However, a wave of heat and humidity can sneak into your home in the interim. Therefore, leaving your air conditioner on all day in hot temperatures is more energy efficient.

What should I set my AC to in summer?

What is the Best Thermostat Setting for Summer Air Conditioner Use? Energy Star recommends the following thermostat temperatures for your air conditioner in the summer: 78°F during the day if people are home. 82°F at night if people are home.

Is it cheaper to keep AC at constant temp?

On the one hand, keeping a constant temperature can be more energy-efficient in some cases because your HVAC system doesn't have to work as hard switching between temperatures. However, this approach can also lead to wasted energy if you're heating or cooling your home when no one can enjoy it.

Is 68 too low for AC?

During a heatwave, we recommend that you don't lower the AC's setting below 68°F. This is already quite chilly for most people, and many would consider it too cold. An air conditioner set this low risk of its coil freezing—and that's bad news because it indicates that the air conditioner is overworked.

Should I put my AC on fan or auto?

Keeping your fan on AUTO is the most energy-efficient option. The fan only runs when the system is on and not continuously. There is better dehumidification in your home during the summer months. When your fan is set to AUTO, moisture from cold cooling coils can drip and be drained outside.

Which mode is best for AC to save electricity?

Eco or energy-saving mode

This is the ideal mode for users looking to save up on energy bills by toning down the performance of the AC and its compressor. Eco-mode uses less electricity by automatically adjusting the fan speed and temperature, while still maintaining a comfortable level of cooling.

Does switching AC on and off cost more?

Although many people believe that it is more costly to turn your AC on and off vs. leaving it on, this is entirely false. People often base this belief on the idea that powering on your system requires a burst of energy, so leaving it running would minimize energy usage by reducing these bursts.

What is the best AC setting to save money?

Energy Saver recommends setting your air conditioner to 78 degrees when you wake up, 85 degrees during the day, and 82 degrees when you're sleeping to save the most money. Kureczka suggests bumping the temperature up to the highest setting you're comfortable with.

What is the best temperature for AC to reduce bill?

When possible, set your thermostat to at least 78º F in the summer to reduce the difference between outdoor and indoor temperatures as much as possible. You can save six to eight percent on your electric bill for every degree your thermostat is raised above 78º F in the summer, according to Smart Energy.

What is the cheapest temperature setting for AC?

One great way to lower energy costs is to avoid cooling an empty house. This is especially true during the middle of the day. If everyone in your household is either at work or school, then turning the temperature to 78-80 degrees will save you a chunk of change when the energy bill arrives.

What is the lowest you should set your AC to?

In short, the 20-degree rule of air conditioning states that you should always keep your AC unit at no more than 20 degrees lower than the outside temperature. It means that, if the outdoor conditions are at 95 degrees, you should set your thermostat at no less than 75 degrees.

What should I keep my AC on to lower my bill?

Set the thermostat as high as comfortably possible during hot weather. The less difference between the indoor and outdoor temperatures, the lower your cooling bill will be. Keep your house warmer when you aren't home during the day, but cooler when you come home at night.

Which AC is best for an electricity bill?

A 5 star AC offers superior energy efficiency, leading to lower electricity bills, while a 3 star AC is more budget-friendly but tends to consume slightly more power. If you're undecided on whether to go for a 5 star or 3 star AC, consider factors like long-term energy savings and initial costs.

Previous article
What knife is best for cutting steaks?
Next article
Is it safe to use tarnished aluminum pans?