Unlike paint, stains don't chip or peel. Give your dull and worn-out concrete a lustrous look by applying a concrete stain that will both complement the look of your house and protect the integrity of the surface.
Peeling problems are usually due to faulty surface preparation. Once the peeling and loose areas are removed, and the surface is prepared properly, new concrete stain can be reapplied to achieve beautiful, long-lasting results. Interestingly, semi-transparent stains are more likely to peel than the solids.
Cons of Outdoor Concrete Staining
Transparent: The semi-transparency of most stains will fail to hide the existing imperfections in the concrete surface. DIY is not easy: Staining concrete is the not the easiest job for the amateur weekend warrior. Using a professional contractor ensure best results.
Concrete staining penetrates deep into the surface, creating long-lasting durable floors. These floors will not fade, chip, peel or wear out in any way. Sealed with an epoxy topcoat, the product is well preserved.
Stained concrete can be an excellent choice for your residential house. Due to light foot traffic experienced in residential stained floors, a simple cleaning may renew their fresh look for many years.
The durability of stained concrete
This applies to both interior floors as well as outdoor surfaces, so any concrete floor will benefit from a stained concrete finish that beautifies, seals, and protects against cracking, peeling, chipping, and fading.
An unsealed, decorative stained concrete surface will show faded colors in a matter of a few months. You could advise your customer that's what happens with an unsealed project and let them make the decision about sealing, but rest assured that an “I told you so,” from you when the fading happens will not comfort them.
Spread The Love! Concrete floors that are stained and sealed don't just look beautiful but are also very durable. But this does not mean they are invincible. If you don't take good care of them, they can develop scratch marks, become dull, and wear out over time.
Epoxy covering is an excellent choice if you need to cover up damage; thus, many commercial work environments opt for epoxy. If you want to improve the look and texture of a concrete surface, stain it to look like natural stone, and achieve a solid, long-lasting color.
Compared to dyes, stains tend to last longer and hold up better. They have a less saturated color than a dye but are more durable and show less wear. For this reason, stained concrete is favored for outdoor surfaces that are exposed to foot traffic, weather, and sunlight.
An attractive and expertly finished garage floor can greatly improve the aesthetics of your home's interior and add to the overall appeal. It not only increases the functionality of your property but also maximizes the resale value when you decide to sell your home someday down the road.
Because of this, acid stain is the best concrete stain to use on an outdoor surface. Other styles of concrete stain may fade or discolor as they're exposed to sunlight. Acid stains are so durable that they can be utilized in high-traffic areas without the risk of chipping or peeling.
Like any hard, smooth surface, stained concrete can become slippery when wet, especially if it has been coated with a high-gloss sealer. For concrete floors or walkways exposed to moisture or in areas with a lot of foot traffic, there are ways you can increase the slip resistance without affecting the color.
Mineral paints and stains penetrate concrete and form permanent, chemical bonds within creating an ingenious adhesion that won't ever peel for extraordinary life. Mineral silicate paints actually penetrate new and aged concrete and form permanent chemical bonds with the minerals inside the concrete.
The easiest and most effective way to prevent your deck stain from peeling is to go over your deck with a proper sealant. Deck sealers essentially waterproof your deck, keeping moisture from contacting the surface directly.
Scaling is a fairly common problem with concrete. It refers to the flaking or peeling of a hardened concrete surface, typically due to repeated exposure to freeze/thaw cycles. Scaling occurs when parts of the concrete surface start to flake or chip away, eventually exposing the coarse aggregate below.
Affordability. Applying an epoxy floor coating will cost between $3 and $10 per square foot, which is quite affordable than the $5- $12 price tag that a high-end concrete staining will cost you.
Unless you have a problem with attractive floors, we think you'll love the look. Stained concrete is great for both indoor and outdoor applications, such as a garage floor, because water evaporates quickly from the surface.
A solid stain will have a more paint-like finish, whereas the semi-transparent will let the color variation of the concrete still show through. So consider the condition and appearance of your existing concrete floor, as well as the final look that you are hoping for when making your choice.
Low-maintenance: The same properties that make concrete floors so durable also make them easy to care for. Properly sealed concrete floors shrug off dirt, grit, stains, spills, and hard impacts. A little sweeping and damp mopping is all that's required to keep them looking like new.
In fact, stained concrete floors cost less than most traditional flooring types and come with numerous bonus benefits. For example, concrete stained floors are eco-friendly, hypoallergenic, and extremely durable.
No, the vibrancy and color tone in acid stains do not fade. However, the physical top layer of concrete which contains the stain can be worn away through use, which can give the appearance of fading. Stone Surface Specialists can apply a special sealer on your newly-stained concrete to prevent this.
Sealing your concrete isn't really a labor-intensive, nor costly, job. By sealing your concrete every 2-5 years, as recommended by experts, you should keep your floor in good shape, preventing cracks, pitting, and additional damage.
Dry times will vary based on temperature, humidity and air flow. In optimum conditions, the concrete will be dry to the touch in 15-20 minutes; however, the total cure time is 24 hours. Repeat if more color intensity is desired. Most stain manufacturers recommend waiting a few hours between applications.
When properly designed and installed, acid-stained concrete and decorative concrete overlays are almost completely unaffected by water.