Although your model may have different features or settings, resetting a GE dishwasher can be done by a reset button, powering it on and off, or by putting it into service mode. Press Reset Button: Many models of GE dishwashers come with a built-in reset feature, to easily reset it if not functioning properly.
To reset the control board on a GE dishwasher, press the "Start/Reset" button for about 3 seconds. If this doesn't work, try unplugging the dishwasher or turning off its circuit breaker for about 30 seconds to 1 minute, then restore the power. This action can effectively reset the control board.
Washer Control Reset
To reset the electronic controls on your washer, shut off the circuit breaker or fuse to the washer or unplug the washer for 2 minutes. For models that have a timer control knob, turn the knob around and back to any position other than final spin for the interrupted cycle. Then, restore power.
On the back of your controller, you will find a tiny hole – the reset button is inside this hole. Use a small, unfolded paper clip (or something similar) to press and hold the reset button for at least five seconds.
Disconnect and Reconnect Power to GE Dishwasher
Depending on your setup at home, turning off power to your dishwasher and restoring it soon after by way of the circuit breaker can prove to be the most efficient way to reset it; although you may prefer unplugging and replugging it.
Some models require you to shut off the power to the dishwasher either by unplugging it or shutting off the circuit breaker. Others are reset by pressing and holding the Start/Reset button on the control panel, then waiting a few moments before attempting to start a wash cycle.
How do I know if my dishwasher's control board is faulty? Look for symptoms like unresponsive buttons, erratic cycle behavior, frequent error codes, or the dishwasher failing to start or complete cycles. These often indicate control board issues.
Unlike some appliances, GE washers do not have a dedicated reset button. To reset your washer, disconnect the power by unplugging it or turning off the circuit breaker, then restore power after a few minutes. Before resorting to this manual reset, try pressing the cancel or pause button.
If the dishwasher buttons aren't working, it's possible a micro switch in the door latch is malfunctioning and preventing a wash cycle from being started. To determine if the micro switch is at fault, use a multimeter to test the switch for continuity. If the switch does not have continuity, replace it.
Dishwashers typically last nine to 16 years, with an average life expectancy of 12 years. Dishwasher lifespan is relatively predictable, but your machine is much more likely to reach that 16-year mark if you take care of it properly. Ever wondered how long dishwashers last?
Control Panel - The control panel is the interface for operating the dishwasher. If it fails, you won't be able to select a cycle. The average cost to fix a control panel is around $250, with a range of $200 to $400.
Press the Start/Reset button to cancel the cycle.
For front-control washers, press the Start/Reset button. If you have a top-control washer, carefully open up the top of the dishwasher door and press Start/Reset, then close the door.
On models that have a digital or LCD display, for example, dishwashers that have a model number starting with GDT580, GDF610, CDT725 and GDT720, press the Heated Dry or Power Dry pad 7 times within 5 seconds to turn off all tones and beeping.
If your GE dishwasher start button is flashing and the dishwasher doesn't begin a cycle, a faulty door switch might be the issue, as it may not be recognizing that the dishwasher door is closed. Inside the door switch assembly, microswitches can break or malfunction.