Hot tubs are usually heated using an electric or natural gas heater, though there are also submersible wood fire hot tub heaters, as well as solar hot water systems.
Electrical resistance heaters are fundamental to hot tubs. These elements are responsible for generating heat. Pressure pumps are responsible for pushing water through the assembly housing. As water makes its way through the heater assembly, it is heated by an element coil.
Water is supplied to the hot tub water pump from an outside source. The hot tub pump's impeller rotates at a high rpm, forcing water through the intake hose at moderate pressure to a heating device. The heater excites the water molecules, actually making them move faster, thus creating a higher temperature.
Turn the jets on
Turning on your hot tub's will help circulate the heat from its heaters around the whole body of water and prevent cold patches from forming. This simple hack can make a big difference to how long your spa takes to hit the temperature you've set.
Good quality hot tubs have insulating side panels and covers so that as much heat as possible is kept in the water. They also have more effective heating elements which reduce the time and energy required to add heat when necessary.
If you're here for the quick answer - yes, it's 100% better to leave your hot tub on and running even when you're not using it. You may be surprised by this answer, but there are actually many benefits to leaving your hot tub on and running. After all, your hot tub is literally designed to stay on all the time.
In general, they use between 3.5 and 6 kWh per day of electricity, but these factors will impact the amount of energy they use and how much you spend: The outside temperature (hot tub power usage in winter is often greater) How frequently you use it. The length of time you use it each session.
One of the most common questions our team gets asked is "should I leave my hot tub on all the time?" Quite simply, the answer is yes... your hot tub is designed to be left switched on constantly and works best when it is left on all the time. Your hot tub is at it's most efficient if left to run 24/7.
A good rule of thumb to follow is always keeping your hot tub's temperature 5 degrees below what it usually is. This will save you time when you're reheating your tub, avoid consuming too much energy, and also protect your hot tub's internal system.
With the cover open you can turn on the air or air jets and circulate cool air into the spa. This is especially effective as the air temperature starts to cool down. Water Treatment is just as important in your cool tub as it is in your hot tub. Continue to your use spa treatment products just as you normally would.
Typically, water heats up by five to ten degrees Fahrenheit in an hour. Heating your hot tub to the desired temperature in the 100 to 102 degrees Fahrenheit range can take three to eight hours.
Most winter power outages are resolved quickly, and most spas with any sort of insulation, and a good spa cover, can hold heat for at least 24 hours.
Contrary to popular belief, when properly maintained, your hot tub's water only needs to be changed once every four months. The average hot tub holds about 400 gallons, meaning that daily it uses three gallons of water.
It's more energy efficient to refill your hot tub with water warmed from your domestic hot water supply (ensuring that it is no hotter than 40 degrees C) than it is to fill the hot tub with cold water and wait for the hot tubs heating element to do all the work.
Gas heat is still an option for some hot tubs, but anymore, most are heated electrically. Here are a few ways in which the two are different so you can know which type of hot tub is right for you..
We recommend you completely change the water in your hot tub at least once every three months. That's a very general guideline, though.
If the water temperature is 104° F (40° C), the maximum safe time is 15 minutes. If the water temperature is between 95-100° F, you should be able to stay in hot tubs for 30 minutes.
In many cases, you'll get the green light to stay in the spa as long as you're comfortable and feeling well. As a general rule of thumb, most hot tub sessions last between 15 and 45 minutes. If after 45 minutes you want to keep soaking, we recommend stepping out for a bit to give your body a break.
The quick answer is that using your hot tub every day is safe. Of course, you need to take note of the dangers associated with some classes of people. For instance, pregnant women and people with heart disease may not be safe in a hot tub.
Once the water is heated to your preferred temperature, you'll save energy—and money—by keeping it there. It costs more to reheat the water from scratch every time you turn it on. Even if you only use your hot tub once a week, you should still leave it constantly running.
Using your hot tub in the morning
The hot water and stimulating jets will get your blood flowing, helping to wake you up. They'll also loosen up your muscles, making it the perfect place to perform a quick stretching routine that will set you up for the day.
The first thing to do is lower the temperature of the hot tub, there's no need to keep the water warm as it's not going to be used. The sanitizer in the water (especially chlorine) will last much longer also.
Above-ground hot tubs are considered personal property. This means they are not considered add-ons to the value of the home. An in-ground hot tub or spa may add value to a home. However, the biggest value-add in a property is for a home that has both a pool and a hot tub.