Shut off your system by hitting the isolation switch, wait 30 to 60 minutes and then turn it back on. This manual reboot fully disconnects your AC unit from power, allowing all electrical components to reset.
There are a number of reasons why your air conditioner might be running but not cooling. It could be an issue with the thermostat, the compressor, or the evaporator coils. Or, it could simply be clogged with dust and debris, which is preventing it from working properly.
Turning off your AC when it's not cooling is more than a precaution; it's a necessary first step in troubleshooting and protecting your system from further damage. By understanding when to perform simple checks and when to call in the experts, you ensure your air conditioner remains a reliable refuge from the heat.
Most modern thermostats will have a clearly marked reset button inside the panel. It's usually small and recessed, so you might need a pointed object like a paperclip to press it. For those wondering specifically how to reset air conditioner thermostat models, the process is generally the same.
If your AC is running but not cooling, it could be due to a dirty air filter, incorrect thermostat settings, a malfunctioning thermostat, a refrigerant leak, dirty condenser coils, blocked vents or ducts, a faulty compressor, frozen evaporator coils, or electrical issues.
Sometimes, after a breaker is tripped, your AC unit may not work as well as before. If you have it set at a cool temperature but all you're feeling is warm air — a quick reset is sometimes all you need.
In most cases, the small red reset button is inside the AC's compressor. If unsure, you can always refer to the user's manual to find the exact location.
Press the reset button. Most models require you to hold the button down for 3-5 seconds before releasing. Restore power to your AC. Restore power to the unit at the circuit breaker, and make sure the unit is set to “on” and your thermostat is set to “cool.”
First, check your filters and coils for dirt and debris that may be impeding airflow. Once you've cleaned the filters and coils, run the air conditioner with just the fan so that the ice accumulation can melt off. If the AC still doesn't blow cold air, it could be that refrigerant levels are too low.
Your air conditioner's internal circuitry needs some time to reset after you turn it back on. This can take approximately a half-hour, so sit tight for about 30 minutes. How to reset air conditioner after power outage at the thermostat. After 30 minutes have passed, turn your air conditioner back on at the thermostat.
Check the thermostat
You should check if it's been set to the correct temperature and also make sure it's set to “cool”. If the AC settings are not right, it won't turn on. You can also check if the batteries in the thermostat are fresh and replace them if needed.
It's a small, red button usually located on or around the unit. The button should have a clear 'reset' label. Once you find the button, press it for around three seconds and observe the AC. Check whether the AC kicks on immediately and if it doesn't, press the button again for another three seconds.
Circuit breakers can be found in homes, businesses, and industrial facilities. They are typically located in the main electrical panel, which is typically located in the basement or garage.
While it's okay to turn off your air conditioner circuit breaker, the time frame matters. Leaving things off for too long will cause problems for your unit and for the space it is meant to cool. Consider only doing this while you're fixing the unit or going on a long trip.
If your AC unit is not cooling at all, it may indicate a malfunction within the system that could worsen if the unit continues to run. By shutting off your AC, you allow the system to rest, potentially preventing further damage until an HVAC professional can inspect it.
A reset brings back the default (or factory) thermostat settings and can help solve connection or programming problems. You can also try resetting the thermostat if it is showing incorrect readings.