Stripping wire insulation can be done with a wide variety of tools and machines. You'll find a handheld cable stripper at your local hardware store for a very reasonable cost. On the other hand, a mechanical cable insulation stripper costs thousands of dollars.
Do I Need a Cable Stripper or Will a Wire Peeler Work? That's a trick question! Whether you know it as a wire insulation remover, a wire stripper cutter, or a cable insulation removal tool, all of these cable insulation stripping tools perform the exact same function: removing insulation from wire or cable.
A wire stripper is a small, hand-held device used to strip the electrical insulation from electric wires.
The thing to understand is that insulated tools aren't just regular tools with some extra rubber on the handles or generic coating on the tool end. They are designed end to end to protect workers from electrical shock up to 1000 V ac and 1500 V dc. They provide this protection in several ways.
A wire stripper is a small hand-held tool that is used to remove the insulation from electric wires. These portable hand-held tools are extremely popular among electricians and even DIYers for removing the insulation to replace or repair the wire.
Insulated hand tools keep you safe
High quality insulated hand tools are engineered to protect you from electric shock and reduce the possibility of arc faults caused by short circuits. The NFPA 70E standard requires insulated tools to be used when working on or near electricity greater than 50 V.
Insulation remover, suitable for stripping & removing the PVC portion of insulated cables from Ø 15MM – Ø40MM, the stripping thickness can be adjusted.
Use a scraper to cut as much spray foam as possible. Wet the metal by applying solvents such as acetone or alcohol with a cloth on the metal and allow it to sit for some minutes. To remove the residue of spry foam left on the metal after scrapping, use the brush to scrub the wet metal. Rinse the metal with warm water.
A wire stripper is a hand tool used to remove the protective coating or insulation from electrical wires, enabling the user to expose the wire for connection or repair. It typically has notches of varying sizes to accommodate different wire gauges, ensuring precise and clean cuts without damaging the wire itself.
Wire strippers are the most efficient and safe tool for removing insulation from electrical wires. These specialized pliers feature notched jaws designed to cut through insulation without damaging the underlying wire. Most wire strippers can handle a range of wire gauges, typically from 10 to 22 AWG.
One of the best wire strippers is a utility knife, such as the Slice® 10550 Manual Utility Knife, and your own two hands, as demonstrated in this video. Using our utility knife, with its finger-friendly® blade edge, gives you a nice, clean cut without any damage to the insulated wires inside the cable.
Use the commercial vacuum hose to remove the insulation and clean the attic floor. Use rakes to collect insulation on to dustpan, place collected insulation into waste bag (without commercial vacuum usage).
Use the correct pliers or wire cutters for the job. Proper use of side cutting (lineman's) pliers: Many applications, including electrical, communications and construction work. Use to grip, splice or cut wires and strip insulation.
Effective Removal Techniques
The removal of loose-fill insulation, such as cellulose, fibreglass, or mineral wool, is best accomplished with a specialised vacuum.
Place the wire you wish to strip on a flat surface. Use one hand to hold the knife and one to hold the wire. Place the knife on the exact spot you wish to strip. Gently roll the wire and let the blade remove the insulation sheathing.
How Long Does Attic Insulation Removal Take? For a 1,500-square-foot attic, professional removal of blown-in insulation without hazardous complications can take as little as 4 to 6 hours to complete.
Removing Fiberglass from Your Skin
Immediately wash the exposed area with warm water and mild soap and wipe with a washcloth to remove the glass fibers from your skin. Take a shower as soon as possible to wash off other traces of fiberglass that may have touched your skin.
Thermal strippers are the kindest to the wire and will soften most insulation materials. These are available in hand-operated or bench types.
Insulated and insulating hand tools are used for live working and work near live parts, with voltage ratings up to 1000V AC and 1500V DC. CATU Insulated tools comply with the international standard IEC 60900.
Insulated pliers are tools you can hold in your hand, made to keep you safe from electric shock when you're working with electricity. With insulation material covering the metal parts, these pliers help protect you while touching electrical contacts.
Insulated tools are identified through the marking on the insulating material. The sign should include a double triangle followed by a 1000V sign and a reference to the standard.