If you have a manual thermostat, setting the temperature on your Honeywell thermostat is simple. All you need to do is to press the up and down buttons to set the temperature. The temperature you set will stay until you change the temperature again.
For the Honeywell Home app: Select the thermostat, press the Schedule icon, choose Options, then Turn Schedule Off. For the 8000 series thermostat: Press the "Sched" button, select "Edit," choose the days and period to clear, then select Cancel Period to clear the schedule.
Use the “+” and “-” buttons to adjust the temperature to your preference. Press the “Hold” button to maintain the set temperature until you manually change it again. Remember to adjust the temperature setting as needed to ensure your comfort.
Using the “hold” function on your system means you can suspend the program if you'll be away from home for a while, such as while you're on vacation. This means you can tell your HVAC to stay put at a specific temperature to keep your pipes from freezing in winter but as warm as you want it to be for comfort.
If you have a manual thermostat, setting the temperature on your Honeywell thermostat is simple. All you need to do is to press the up and down buttons to set the temperature. The temperature you set will stay until you change the temperature again.
Check the Power Source: Ensure your thermostat is receiving power. Replace batteries if your model requires them or check the circuit breaker if it's hardwired. Inspect the Wiring: Over time, wiring can degrade. Inspect for any loose connections or signs of wear.
When a user sets a Hold, the thermostat is told to ignore the schedule and set the temperature based on the Hold setting. In other words, a Hold is a command that overrides the set temperature. A hold can be either permanent or temporary.
Most modern thermostats will have a clearly marked reset button inside the panel. It's usually small and recessed, so you might need a pointed object like a paperclip to press it. For those wondering specifically how to reset air conditioner thermostat models, the process is generally the same.
To remove scheduling. Go to settings, Select preferences then advanced settings. Then you will be able to select non-programable.
The thermostat itself might be malfunctioning or experiencing technical issues. This could be due to electrical problems, a software glitch, or physical damage. Some thermostats have a lock feature to prevent unauthorized changes.
To change system settings, touch the mode button on the left-hand side of the thermostat. To switch from heating to cooling, or to turn everything off continue to press the mode button until you have found your desired selection.
Remove the thermostat cover and check for problems
Your subbase will either have leveling posts where you can lay the level, or a flat area at the top or bottom where you can set the level (Photo 1). Move the subbase around until it's level and then tighten the mounting screws.
For a mechanical or analogue thermostat, simply twist the dial until you find your ideal temperature, heating is gradual and perhaps not as accurate as a smart thermostat.
By pressing “Hold”, your thermostat will lock in the temperature it's currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.
The best way to save money is by combining both. The “run” feature lets you preset the temperature when you're not home to prevent wasting money on cooling or heating an empty home. Meanwhile, the “hold” button lets you change the room's temperature without changing your energy-saving, preset schedule.
Troubleshooting a Programmable Honeywell Thermostat
Put in new batteries; Check the circuit breaker; Check the indoor unit to make sure all the panel doors are closed; Make sure the power is connected to the furnace or air conditioning unit by checking the switch near the indoor unit is up.