Fixing falling roller blinds depends on whether the entire unit is dropping off the wall or the shade itself won't stay rolled up. For failing mounting brackets, tighten or replace them, or add friction. For a slipping shade, adjust the tension mechanism.
What to do if Your Blinds Keep Falling Down?
If your roller blind won’t stay up, the fix usually depends on whether it has a chain mechanism or a spring-loaded (cordless) system.
If your blinds keep falling down, the issue usually stems from loose mounting brackets, stripped drywall anchors, or worn-out tension mechanisms. Fixing the problem quickly depends on how the blind is mounted:
If they are regular blinds, you pull on both cords simultaneously and then move them to the side while releasing them and they should lock.
To get your blinds to stay up, the exact fix depends on their style. For corded blinds, pull the strings slightly to the left before releasing. For cordless shades, gently pull the bottom rail down and swiftly push back up.
Magnetic Strips Work Fast
Small adhesive magnetic strips stick to your window frame at the bottom. Matching magnets on the blind's bottom rail create a gentle hold that prevents swinging.
Locking blinds in place depends on their type. For corded blinds, raise or lower them to the desired height, pull the cords outward at an angle (away from the center of the blind), and release. For cordless styles, simply push or pull the bottom rail to your preferred height; the internal tension holds them there.
Common roller blind mechanism problems include the blind slipping or falling down, the chain popping off or jamming, and the fabric rolling up crookedly. In most cases, these issues can be resolved in under ten minutes by adjusting the spring tension, popping the chain back into the gears, or re-rolling the fabric evenly.
Testing the tension
Lay the blind face down and find the small spring at the bottom of the frame, at the back. The two ends of the cords are secured to this spring. On one side, the cord is secured through a small eyelet with a screw. Loosen the screw, then pull through the cord to adjust the tension.
If your blinds are newer, under warranty, or only need minor fixes, repair is the more cost-effective route. However, if the repair cost exceeds 50% of the price to replace the blinds, it's best to install new blinds.
If your roller blind won’t stay up, the fix usually depends on whether it has a chain mechanism or a spring-loaded (cordless) system.
To keep your shades from blowing in the wind, anchor the bottom rail using bungee tie-downs attached to ground hooks, or install hold-down brackets. For vertical control, use side tracks or guide wires, and always roll them up during severe storms.
On average, most blinds last between 5 and 10 years. However, the actual lifespan of blinds can vary depending on the type: Roller blinds: around 5–10 years. Vertical blinds: 5–8 years.
When a roller blind keeps falling down, the fix depends on whether the entire mechanism is slipping off the wall or if the blind itself rolls down by itself.
How to Keep Roller Blinds in Place?
To tighten, lower the shade about 18 inches from the top, remove from window brackets. Roll up shade all the way to the top by hand, then replace in brackets. To loosen, raise the shade to the top and remove from brackets. Unroll about 18 inches and replace in brackets.
After lowering your blinds to the desired level, it's time to lock them in place. To do this, gently pull the string at a 45-degree angle to the right. You should feel and hear a click when the clutch locks into place. Don't tug, but make sure to give the string a firm tug, so your blinds stay in place.
Examine the blind cords
You should also try raising and lowering the blinds a few times; it may be that the strings are uneven and this can help to re-tension them. If re-tensioning doesn't solve the issue, you may need to tighten or loosen the blind cord mechanism near the top and adjust the tension.
There are some measures you can take to attempt to fix this issue:
Enjoy effortless installation with twist and fit roller blinds. With an innovative twist tension rod, these no drill roller blinds can be installed in recessed windows in under 30 seconds.