The best way to keep your porcelain sink looking squeaky clean is with a light cleaning every so often. We recommend you use a gentle scrubber or a sponge, some dish soap, and a little warm water at least once a week.
For white porcelain only, bleach can be used to remove stains; never use chlorine bleach in colored or vintage porcelain, as it can damage the finish. For both white and colored porcelain, liquid oxygen bleach—such as hydrogen peroxide—is a good alternative.
To give a white sink a deep clean, it's best to remove limescale with a vinegar- or lemon-based cleaner at regular intervals. Both standard cleaning products work very well indeed and break down naturally. You should ensure that your cleaning product isn't too aggressive and is compatible with food.
Common household go-to's like bleach and hydrogen peroxide can be used to clean white porcelain, but the solution would need to sit covered in a layer of paper towels for 30 minutes to an hour.
Porcelain has a glass-like coat that is susceptible to scratches. Never use hard abrasives like steel wool to scour porcelain, and be careful with anything acidic, as it can dull the finish. If you use an acidic cleaner, make sure to always rinse your sink thoroughly after use.
The best way to keep your porcelain sink looking squeaky clean is with a light cleaning every so often. We recommend you use a gentle scrubber or a sponge, some dish soap, and a little warm water at least once a week.
Avoid tooth-whitening toothpastes with bleach and harsh abrasives such as baking soda. These will work on your natural teeth only, whitening them in ways that may not match with your porcelain veneers. This will particularly be noticeable if you only have veneers on your front teeth and not those on either side.
For harder to clean stains on ceramic/fireclay sinks, we recommend using an equal-parts water and bleach solution or non-abrasive cleaner. Always rinse your sink thoroughly after cleaning and dry with a soft dry cloth to restore its original shine.
A major cause of yellow staining in a bathroom sink is hard water, or water with an overabundance of minerals. This source of staining is especially likely if your home uses well water.
Step 1: Wet your microfiber cloth or sponge with hot water and a few squirts of dish soap. Step 2: Wipe down the sink and apply a lil' elbow grease to any spots that are extra dirty. Step 3: Rinse away the soap and grime, et voila! Your sink is sparkling clean and ready to be used again.
A baking soda and vinegar solution is perfect for cleaning a porcelain sink and removing stains. Make a paste out of the two ingredients and use a soft-bristled brush (such as an old toothbrush) or cloth and your finger, to apply and scrub the stained area.
Hard water deposits can build up around the tap area and we recommend the use of a limescale remover – always follow manufacturer's instructions. A proprietary cleaner for ceramic sinks or CIF is recommended.
Baking soda may be tough on stains but it is still gentle in a way and can make your porcelain get back to its natural state. Just mix baking soda with water then rub the mixture onto the stained area using a non-abrasive sponge. If you see that the area already whitens, rinse it with water.
If you're looking for a good surface cleaner, white vinegar is great! It can help get rid of dingy limescale build-up that is hurting the look of your white sinks. While white vinegar is great at removing limescale, it also works as a disinfectant as well.
Cause: If you're seeing a yellow tint to your water and/or yellow stains on your sink, tub, fixtures and laundry, this is may be caused by natural organic material known as tannins. Tannins are typically a well water problem, but may occur in city water as well.
Despite the large number of necessary materials you have collected, painting your bathroom sink is a very straightforward and simple project. Simply follow the steps below and you can easily DIY this project. Prepping the Area: Before painting, your area must be prepped and thoroughly cleaned.
For white porcelain only, bleach can be used to remove stains; never use chlorine bleach in colored or vintage porcelain, as it can damage the finish. For both white and colored porcelain, liquid oxygen bleach (such as hydrogen peroxide) is a good alternative.
Just a simple mixture of baking soda and vinegar will take away all gunk and stains that you could throw at your sink. I suggest making a paste in the sink, so you can best gauge how much you need, but just sprinkle baking soda over the entire bottom surface then drizzling a light amount of vinegar over top.
Coffee stains Scrub away coffee stains with a damp washcloth dipped in baking soda [source: Porcelain Enamel Institute]. Rust stains Borax is great for getting rid of many stains on porcelain, including rust. Create a paste from ¼ cup of lemon juice and 1 cup of borax.
CLR Metal Clear, Cleans and Shines Porcelain, Chrome, Stainless Steel and Aluminum, 12-Ounce Bottle.