Keep the Vents Open
Covered or closed air vents throw off your HVAC system's supply/return air balance, decreasing efficiency and upping operating costs. To stop this, always keep at least 80 percent of your supply registers open and ensure that no return vents are hindered by curtains, furniture or rugs.
Start by setting your thermostat higher than normal when you are away, and at 78 degrees when you are home. That is the Department of Energy's recommended setting when you need cooling, but want to save energy.
It cannot be cheaper to keep AC on all the time. Once the AC is on, it uses electric power and the electricity used by the AC is being recorded by the electric meter as well as for the other appliances being used in the room to be charged for tariff by electric regulatory agency.
Best AC Temperature Settings While You Are Home
As you consider the most comfortable room temperature for your lifestyle and family, keep in mind that for each degree that you set your thermostat above 72 degrees, you can save up to 3% on your energy bill.
You can also reduce your energy costs significantly by raising the temperature while you are at work, away from home, or asleep. For the greatest savings, consider setting your thermostat to: About 78 degrees while you are at home. About 82 degrees while you are sleeping.
While ENERGY STAR suggests 82 degrees, that may be too uncomfortable for most families. Most people sleep better when their sleeping area is chilly, so that's why the National Sleep Foundation advises 60–67 degrees.
Turning off your air conditioner at night can save up to 30% on cooling costs, especially in areas with cooler nighttime temperatures. Opening windows at night is more energy-efficient if outdoor temperatures are similar to or cooler than your thermostat setting.
Increase the thermostat
If you are just as comfortable with your thermostat one or two degrees higher than you currently have it set, go ahead and turn it up. Even a one degree difference will have an impact on your energy bill. Many recommend 78 degrees as a good temperature for air conditioners to run efficiently.
On an average summer day, a general guideline is that your AC should operate between 12 and 16 hours. However, several factors can influence this, including the outdoor temperature, desired indoor temperature, the size and type of your unit, and your home's energy efficiency.
There are benefits to having your air conditioner set to “auto” and “on.” The benefits of the “auto” setting include higher efficiency, lower energy bills, better humidity control, less wear and tear on some components, and quieter running.
What is the Best Thermostat Setting for Summer Air Conditioner Use? Energy Star recommends the following thermostat temperatures for your air conditioner in the summer: 78°F during the day if people are home. 82°F at night if people are home.
According to the U.S. Department of Energy, you'll want to keep your thermostat set to 78 degrees. It's considered the ideal “magic number,” the one that saves you the most money throughout the season.
Travelling at speeds over 50mph - in this instance, it's more economical to use the air conditioning system. This is because the drag from opening your windows will have more resistance at high speeds, so it's more beneficial to use the air conditioning system.
By setting your air conditioning to run at full blast when temperatures are highest during the day, and then reducing its intensity at night, you can maintain comfort levels while minimizing energy waste and lowering your air conditioning bills.
In short, the 20-degree rule of air conditioning states that you should always keep your AC unit at no more than 20 degrees lower than the outside temperature. It means that, if the outdoor conditions are at 95 degrees, you should set your thermostat at no less than 75 degrees.
Eco or energy-saving mode
This is the ideal mode for users looking to save up on energy bills by toning down the performance of the AC and its compressor. Eco-mode uses less electricity by automatically adjusting the fan speed and temperature, while still maintaining a comfortable level of cooling.
Energy Saver recommends setting your air conditioner to 78 degrees when you wake up, 85 degrees during the day, and 82 degrees when you're sleeping to save the most money. Kureczka suggests bumping the temperature up to the highest setting you're comfortable with.
Energy Costs and Environmental Impact: A fan is better if you're on a tight budget or value energy conservation and environmental sustainability. Noise Sensitivity: Go for a fan if you're a light sleeper or noise-sensitive. A fan's soft, consistent whirr is more soothing than an AC's intermittent noises.
For many of us, 70 degrees is the ideal indoor temperature, but when it is close to 100 degrees outside, your AC unit will be working quite hard to meet these expectations. Consider setting your thermostat at 75 degrees to 80 degrees in your home if the outside temperature is approaching triple digits.
The best way to save money is by combining both. The “run” feature lets you preset the temperature when you're not home to prevent wasting money on cooling or heating an empty home. Meanwhile, the “hold” button lets you change the room's temperature without changing your energy-saving, preset schedule.
This is more of a personal question, as different people feel comfortable at different temperatures. Since 72 degrees is generally agreed upon to be an ideal indoor temperature, most people would probably still feel comfortable setting their AC units slightly higher than this, perhaps at around 75.