Commercial vinyl floor cleaners are available, but you can make a simple, effective cleaner for vinyl floors by mixing apple cider vinegar with water. The vinegar's acidity removes dirt without leaving a soapy film. Mix one cup of cider vinegar with a gallon of hot water.
Like with hardwood floors, vinegar's acidity will take away the shine and sheen of a no-wax floor, such as vinyl and linoleum.
Although there are a variety of cleaning solutions for LVT on the market, white vinegar or apple cider vinegar will also do the trick.
Lukewarm water is often best. Some people even prefer a homemade solution of apple cider vinegar and water. Clearly, the decision is yours depending on your preferences. Because most LVT is waterproof, it's best to go over the wet flooring with a microfiber cloth afterward.
Marble, granite, and other natural stones, like slate, whether used as home finishes, such as countertops, floors, and shower walls, or household goods like tabletops or serving pieces, should not be cleaned with vinegar.
Small Appliances
The plastic and glass surfaces on most small kitchen appliances, such as blenders, coffee makers, and toasters, are safe to clean with vinegar, but you want to avoid any rubber parts or metal that vinegar can corrode.
Now, don't confuse distilled with basic white vinegar, which is stronger and has up to 25% acetic acid. That vinegar is sold exclusively for cleaning purposes and is not a good idea to ingest. However, beyond cooking, distilled white vinegar can be used for many of the same household chores.
Vinyl Records can start to warp at around 60°C (140°F) so make sure never to leave them in a car if transporting on a hot day… or take them down to the beach… On the other hand, don't keep them too cold, they can become brittle and shatter much easier.
Warping, from improper storage, too-tight plastic wrap or sun exposure. Scratches, from sliding the stylus across the record (usually accidentally).
Dampen a clean microfiber cloth with water (distilled water is preferred), and lightly wipe the entire surface of the record in a circular motion with the grooves of the record, being careful to avoid the center label.
Combine 50/50 white vinegar and distilled, deionized water OR 1 teaspoon dish soap with 1 liter warm distilled, deionized water in a plastic spray bottle and shake to combine. Spray the solution on your record and let it sit for 5 minutes.
HDPE is strong, light, resistant to chemicals and moisture, and permeable to gas. It is safe for storing many liquids (including cider vinegar!) and after use it can be washed out and reused for many purposes.
Vinegar is about five percent acetic acid, which helps it break down the structure of some dirt, oils, films, stains and bacteria. But that acidic agent can also harm some surfaces, so test it in an inconspicuous area. Vinegar is not recommended for use on natural stone, waxed wood, cast iron or aluminum.
Rinsing is not necessary! If you're simply using a vinegar and water solution to wipe and disinfect, you won't need to rinse. However, if there's also plenty of dirt and grime you're wiping away, you may also want to rinse with some extra water.
Hydrogen Peroxide and Vinegar
“Combining these two creates peracetic acid or corrosive acid, an irritant that, in high concentrations, can harm the skin, eyes, throat, nose, and lungs,” says Bock.
The species most frequently reported in vinegar production comprise Acetobacter aceti, Acetobacter cerevisiae, Acetobacter malorum, Acetobacter oeni, Acetobacter pasteurianus, Acetobacter pomorum, Gluconacetobacter entanii, Gluconacetobacter liquefaciens, Gluconobacter oxydans, Komagataeibacter europaeus, ...
However, it's important to remember that vinegar is an acid. This means there are a few things you should not clean with vinegar. White vinegar isn't suitable for cleaning natural stone, granite, marble, quartz, or similar. This is because vinegar can be corrosive to these materials.
Squeaky Cleaner, COREtec Clean Spray, and Bona Pro are great for the kitchen, bathroom, hallway, and any other room in your home. They're ideal for vinyl floors and work on a variety of hard surfaces.
Add a bit of baking soda to your regular floor cleaner to help keep the vinyl fresh, smooth, and shiny. Applying a small amount of WD-40 lubricant is a safe way to remove any scratches or scuffs without damaging the vinyl. You can also use a bit of jojoba oil to gently polish vinyl floors.
Find and use the correct soap for your vinyl floor – a no-wax vinyl floor for example means you can't use wax, so make sure there isn't any in your floor cleaner. Always use a cleaner made for use on your vinyl floor.