Just make sure your pump and filter are running properly. If you add algaecide, keep in mind that some algaecide contains copper, which can actually make a pool cloudy. If the cloudiness persists 24 hours after shocking, then it's possible that you used a poor-quality chlorine shock.
To treat pool water made cloudy by a lack of chlorine, simply keep adding chlorine to the water until the water maintains a chlorine residual of 2ppm or more. If you suspect that the cloudiness is caused by poor water balance, simply add a pH/alkalinity decreasing chemical until the water comes into balance.
The presence of too much algaecide can lead to a foamy pool water. Small bubbles will begin to be produced as the water is pushed through the return jet and back into the pool. Do not confuse these bubbles and foam with another common problem, which is air in your pool lines.
It could take up to 24 hours for the pool water to clear after treating with Algaecide. We suggest waiting at least 48-72 hours before adding any more items (shock, algaecide, etc) to your pool water. If there are no signs of clearing you may need to shock your pool or drain and refill with fresh water.
How long does it take for a cloudy pool to clear? Depending on how cloudy your water is, it may take 2-3 days for your water to clear. If you're using a clarifier, you'll need to run your filter 24/7, keep your water chemistry balanced, and add the proper amount of water clarifier every other day until it's clear.
For the most part, yes. It can be unattractive and it should be addressed, but it is mostly safe to swim in cloudy water. The only exception would be if the pool is cloudy because there are too many chemicals in it. This pool water would be unsafe to swim in and should be avoided.
ADD POOL CLARIFIER
If your water is still green, wait another 24 hours and redo the steps from Days 1 and 2. Now is the time to add Pool Clarifier and let it circulate for 12 hours. This will clump the algae together into vaccumable pieces.
Let the water circulate for at least two hours.
Circulate the water for about 2 hours to ensure the flocculant is fully mixed in, then shut off your pump and let it sit overnight. During this time, the chemical will start to bind the particles together and settle them to the bottom of the pool.
Algaecide should be added to your pool water on a weekly basis. Preventing algae is the key to fun in your pool. Algaecides act as a backup to your normal sanitization program and prevent algae from starting and growing in the pool. Algaecide should be added after every shock treatment.
The first thing we recommend for getting rid of pool foam is to use a hand skimmer. It can get rid of most of the foam right away, and with balanced pool water, the rest of the foam should quickly clear up. As we mentioned, algaecide may cause foaming, but there are non-foaming algaecides available.
In summary, if your combined chlorine reads above 0.5 ppm, your water may turn cloudy and become unsafe for swimming. If this is the case, you need to shock your pool immediately to clear it.
The simple answer is No. Baking soda cannot be used to clear up a cloudy pool because it is a base. Bases raise PH levels, which causes the water to turn cloudy. Some people suggest using baking soda as a quick fix to high alkalinity levels, but it's not reliable as a pool chemical.
When pool water is cloudy, you may wonder why. Pool chemicals could be out of balance or the pH might be off. Chlorine levels and the right pH are key to keeping a pool clear. If a pool's pump or the filter isn't working right, the water may look murkier than usual.
It is best to wait 30 minutes after adding it to your pool. We recommend waiting at least 15 minutes to swim after adding algaecide to your swimming pool. Most algaecides are perfectly safe to swim with. It is not recommended to swim with flocculent in your pool as it will reduce its effectiveness.
So unless you're dealing with mustard algae or black algae, leave the algaecide on the shelf and get ready to shock the heck out of your pool. But when dealing with regular ol' green pool algae, chlorine is your best bet to kill it dead.
While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
Baking Soda and Green, Blue, or Yellow Algae
You'll need to use an algaecide to kill the algae and superchlorinate your pool to clear the water. After this treatment, test your pH and alkalinity and add baking soda to raise alkalinity to at least 100 ppm and pH to between 7.2 and 7.8.
OVERVIEW. Clorox® Pool&Spa™ Algaecide + Clarifier prevents and treats pool algae and includes a built in clarifier to keep water clear. Being one step ahead of algae is crucial because as algae grows, chlorine must work harder to keep your pool clean.
Add an initial dose of 97 to 128 oz of Pool Time Algicide + Clarifier per 10,000 gallons of water to rid the water of algae. Thereafter, add 24 to 48 oz (per 10,000 gallons) weekly during the swimming season to prevent re-growth of algae.
Adding a recommended dose of shock to your pool can clear it right up. Poor circulation or filtration can contribute to cloudy water. Make sure your pump and filter are working properly.
Excessive levels of pool chemicals can cause your water to become cloudy. High pH, high alkalinity, high chlorine or other sanitisers, and high calcium hardness are all common culprits.
Pool water with a high total alkalinity (TA) is often associated with cloudiness. This is because it can cause an imbalance in the pH levels and lead to calcium scaling. Typically if your TA is higher than 200 ppm, you're at risk of a cloudy pool and just like imbalanced pH levels, your chlorine will be less effective.