When you refinish your floors, you can change the color of your flooring. Most hardwood floors can be made darker, lighter, redder, or anywhere in between. If your flooring is solid hardwood, it can be sanded and refinished in a different stain for a different appearance.
If your hardwood floors are dull, scratched, and looking old, it's probably time to refinish them. According to HomeAdvisor, the typical price range to refinish hardwood floors is between $1,074 and $2,485, with the national average at $1,757. This comes out to $3 to $8 per square foot, including materials and labor.
The answer is usually YES!
Many homeowners don't realize that you can change the color of hardwood flooring when you refinish your floors. Yes, it's true…you can go light or dark or red tones or anywhere in between. Most are pleasantly surprised it doesn't matter if you are going light to dark or vice versa.
In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood.
Luckily, you have options other than leaving the floor as it is or replacing it. The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.
Because when a hardwood floor starts to show wear and tear, you can refinish it and in so doing, revitalize its look and performance. Make no mistake, however: Sanding, staining, and sealing a wood floor takes time and effort. It's a demanding project, even for a veteran home handyman.
Overall, you can stain hardwood floors darker without sanding as long as you clean, degrease, and buff the hardwood floor before applying the wood stain. All of these will ensure that the floor is ready to absorb the wood stain and that the finish comes out smoothly.
Installing hardwood flooring averages between $6 and $12 per square foot. On average, wood flooring costs between $3 and $7 per square foot for materials and $3 to $5 per square foot for labor. An estimate for installation of 1000 square feet of hardwood flooring runs between $6,000 and $12,000.
If your hardwood floors have been sanded and finished with Bona Mega Clear HD, it is safe to sleep in the home about 2-3 hours after the project is finished, but again, only if there are other rooms that have not been robbed of their furniture – furniture should stay off floors for at least 24 hours after ANY project ...
Besides, a properly maintained wood floor can go 20 or 30 years or more before needing to be refinished, says Lupresto. And it can be sanded and refinished "easily six or seven times" over its lifetime, he says.
Whitewashing hardwood floors costs $2 to $7 per square foot and requires sanding to remove the old finish and then applying a light wash and clear polyurethane topcoat instead of a darker stain.
Please note that refinishing hardwood floors gray is challenging and should be handled by an expert, especially one with experience in gray and white washed floors. First, the sanding must be immaculate. Stain should be consistent and applied in strips to avoid any cross-grain color-variant lines.
If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.
It is a terrible idea to sleep or stay in a house after staining floors. The stain fumes are often overwhelming and highly toxic. In addition, exposure to such a stinky smell for long periods of time can trigger severe breathing problems and other health issues to both humans and pets.
A solid hardwood plank at least 3/4 inches thick will likely need to be refinished four to six times during its total lifespan. It's commonly accepted that you refinish every seven to ten years.
The answer to the question is, “do the floors first!” Here's why: Removing and replacing flooring or carpeting is dirty work. If you paint first, and then do floors, there is a good chance that a lot of dirt, dust, sawdust or tile/stone dust will end up on your freshly painted walls and trim.
As CNN reported, hardwood floors can also increase home value by 3-5%. This makes them a very attractive prospect for anyone looking to sell their house in the near future. However, even if you don't plan on moving any time soon, hardwood floors may still be a good investment.
The national average cost to install hardwood flooring is $6 to $12 per square foot for both labor and material fees. For higher-end wood and larger spaces, like if you're redoing your entire first floor in hardwood, you may pay more—possibly between $13 and $25 per square foot.
Typical costs: Installing a standard solid-strip hardwood floor averages about $8 a square foot for materials, insulation and site finishing, and up to $12 a square foot for wide pine planks, or $1,150-$1,750 for a 12x12-foot room.
It may sound strange, but to make the effect darker, we coat the wood floor with black tea first. You can simply steep some black tea with water, then coat the floor with it just like you do the vinegar/steel wool solution. Again, you need to wait for the floor to dry before your next step.
These hardwood floors typically take between six months to two years to reach their mature colour depending on the specie of wood and the amount of natural or artificial light the flooring is exposed to. Some wood species become darker and some become lighter over time.
It's possible to make your hardwood floors solid black if you really want them to be that dark, but most of our clients choose something lighter like a black/white hardwax oil mix, or Jacobean/Ebony stain mix or a Coffee brown color.