The answer is that vinegar will not harm your pipes if used in small doses as recommended in many of the recipes that you find online. No matter what your pipes are made of, pex, pvc, copper, etc. Vinegar will not harm your water pipes.
Pour about 1 cup of white vinegar into the drain, let it sit for 30 minutes to an hour, and then rinse with hot water. For more stubborn clogs, using the baking soda and vinegar mixture is advisable.
If you need a stronger cleaning, pour 1/2 cup of baking soda down the drain, then add 1/2 cup of vinegar. The two ingredients will create a chemical reaction that's excellent at cleaning out clogs. Wait 15 minutes, then pour in very hot water to clear out the residual clogging agent and cleaner.
As a diluted form of acetic acid, vinegar is not strong enough to harm the septic system or the vital bacteria within the tank. However, using excessive quantities may disrupt the pH balance in the tank, which can potentially affect the bacteria's ability to break down waste.
For stubborn buildup, wipe down the surfaces using a cloth dipped in a mixture of equal parts vinegar and water. Dip a soft toothbrush into the solution to scrub around the edges. Finish by wiping the faucet with a clean, dry cloth, preventing water spots and making the surface shine.
“It is important to note that vinegar isn't recommended for all faucets,” says Dills. “Faucets with black, bronze, or gold-colored coatings and finishes may get damaged or discolored by the vinegar's acidity.
Vinegar is good for cleaning because its acidic which means it's able to dissolve dirt, grease, grime and kill bacteria, making it perfect for cleaning your bathroom.
While harmless for most metal and PVC pipes, prolonged exposure to the acidic nature of vinegar might corrode certain metals, like copper. PVC pipes, on the other hand, can withstand these substances without damage.
Yes, Dawn dish soap is generally safe for septic systems. It's got quite a reputation for being septic-friendly, and for good reason. As long as you're not going overboard with it, Dawn isn't likely to mess with the bacteria in your septic tank.
Baking soda is abrasive, which, when used in large quantities, will cause the drain more damage. Additionally, the acidic nature of vinegar can eat away rubber and metal, damaging the plumbing. As these products break down the pipe and connectors in the plumbing in your home, it will cause more clogs over time.
Use Baking Soda and Vinegar
Baking soda and vinegar is a very powerful combination that can help clear nasty hair clogs. Besides helping dissolve hair in your drain, baking soda also has disinfectant qualities that can fight fungi and bacteria.
If you put too much baking soda down a drain onto a clog, it can sit on the clog and become a solid mass as it is subjected to more and more water. This will make the block worse and even harder to remove.
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.
The only real side effect from leaving vinegar to its own devices is that its acidity will gradually decrease over time, making it less potent. This is why a "best by" date can be found on the bottle, but it's still perfectly fine long past that — it isn't an "expiration date," by any means. Vinegar does not expire.
Drain Line Material
Chlorine bleach can quickly eat away at not only the line but the glue and cement joining the line to the fittings and the condensation pan. If your drain line is PVC, stick to white distilled vinegar for clearing clogs and debris, particularly during winter.
So, to sum it all up, Lysol Toilet Bowl Cleaner and most other Lysol products are generally safe for septic systems if you use it like they tell you to. It cleans and disinfects well without hurting the good bacteria that your septic system needs. But remember, don't use too much of it or any cleaning stuff.
Generally speaking, you'll want to avoid products that contain phosphates, chlorine bleach, or ammonia, as these can harm the natural bacteria in your septic tank. In addition to choosing the right detergent, it's important to be mindful of how much you use.
It is safe to leave baking soda (and vinegar) to work overnight to unclog a drain. Always flush this mixture down with boiling water—no matter how long you leave it sitting in the drain. Can I use hydrogen peroxide to unclog a drain? Yes, hydrogen peroxide is safe to use for unclogging a drain.
All right, so in summary, don't use bleach; use vinegar. That helps with any mildew growth—keeps you running clean. It's not going to actually clean your A/C drain, but it can prevent some backups.
The plastic and glass surfaces on most small kitchen appliances, such as blenders, coffee makers, and toasters, are safe to clean with vinegar, but you want to avoid any rubber parts or metal that vinegar can corrode. This includes stainless steel.
Avoid using cleaner tabs—they often contain bleach, which is a no-no for cleaning toilet tanks because of bleach's corrosive properties. Add a cup of white distilled vinegar to the tank once a month. Leave it to sit overnight and then flush it in the morning. Check for sediment buildup and staining every month or so.
White vinegar, also known as distilled vinegar or spirit vinegar, is made by fermenting grain alcohol (ethanol) which then turns into acetic acid. Water is then added to the vinegar, so white vinegar is made of five to ten percent acetic acid and ninety to ninety-five percent water.