The short answer is yes. Fascia is typically included in a roof replacement. When your roof is replaced, the roofing contractor will remove the existing shingles or tiles, inspect the roof decking for any damage or rot, and replace any damaged decking.
A fascia is the vertical finishing edge where the gutter attaches to the roof. An experienced roofing pro can replace portions that are rotting, water-damaged, or taken over by pests before problems get worse.
Fascia boards are a lesser-known, but an integral part of the home roofing system. Fascia boards are located behind the gutter, covering the entire roofline, and provide a supportive and secure gutter mounting surface.
Sofft installation costs should fall between $1.50-$4 per linear foot, and fascia installation costs should fall between $6-$20 per linear foot. As a result, the average cost to install soffit and fascia should fall between $7.50-$24.
Roof Carpentry
Not just the fascia and soffits as mentioned above, but to the external cladding of the structure such as weatherboards and window frames.
When your roof is replaced, the roofing contractor will typically inspect the fascia boards to determine if they're in good condition. If the fascia is damaged or deteriorating, they'll replace it to ensure it can support the new roof system properly.
If you need a new fascia board, the replacement cost per linear metre is usually from £80 to £100. Replacing soffit boards is slightly more involved due to positioning and will usually cost somewhere from £100 to £120 per linear metre.
How long does it take to replace fascia? Getting your soffit and fascia replaced typically takes 1 to 2 days. If you have a house that's larger than average, or a house with many curves and other intricate shapes, the installation is likely to take longer than a couple of days.
Many home improvement stores, like Home Depot, offer professional installation services for fascia and soffit, although availability may vary based on location.
Don't worry, replacing soffit and fascia boards is actually rather simple, and can be done by anyone with rudimentary DIY knowledge and experience.
Your homeowner's insurance will usually cover external damage to siding, shingles and soffits. However, as with your roof, rot and wear and tear aren't covered.
Ideally, soffit and fascia materials should be installed before you place tiles or any other type of roofing material on the roof.
Most soffit and fascia panels will come with a guarantee for X amount of years (usually ten or more) but the exact time between replacements will depend on external conditions, the level of care they are subjected to, as well as the materials they are made from.
Soffit and fascia repair costs $3,300 on average, but it can cost between $600 and $6,000, depending on the project's size and material type. Soffit and fascia repair jobs cost between $600 and $6,000. If you have a roof, you likely have both soffit and fascia, even if you don't know it.
Roofers and contractors can typically handle soffit and fascia repair. Licensed roofers and contractors can usually take care of soffit and fascia repair.
Yes, it's possible to replace a soffit without removing the fascia. However, it's often more practical to replace both at the same time to ensure a cohesive and secure installation.
The cost to install vinyl soffit is $2,550 on average, or between $1,625 and $3,500, depending on the length, condition, and height of the eaves. If you're installing new vinyl soffit materials, you can expect installation prices of around $2,550, with costs commonly ranging from $1,625 to $3,500.
The soffit board is placed beneath the fascia board and is the board that you can see if you are standing far enough away from the house to see the roof. You do have the option of choosing to ventilate the soffit board to allow air to flow into the roof.
If your roofers are replacing your fascia board as part of a full roof replacement, then they will install the new shingles before they address the fascia. There is no way to replace the fascia board without removing the gutters, as the gutters are mounted to the board.
You should replace wooden fascia every 10 to 15 years, depending on its condition and exposure to the elements. Regular maintenance helps prolong its life, but eventually, it will need replacing. Consider switching to uPVC fascia for a longer-lasting, low-maintenance option that can last 20 to 30 years or more.
Wooden fascia boards, if well-maintained, can last 10-15 years. However, exposure to harsh weather conditions may shorten their lifespan. Alternatively, modern materials like PVC or composite fascia boards are more durable and resistant to moisture, giving them a longer lifespan with minimal upkeep.
Over-cladding is a method of roofline installation where the original wood fascia and soffit boards are left in place and the new uPVC fascia and soffits are attached to the old boards. Doing this solution is considerably cheaper than getting rid of the existing timber boards.
The disadvantages of wood prompt many property owners to consider aluminum instead. Aluminum fascia and soffit can be a good choice because it is both lightweight and very low-maintenance. A good quality aluminum material won't corrode, fade, or crack, even in extreme weather.