Epsom salts: Many people use Epsom salt in their bath to help soothe tired, aching muscles; however, Epsom salt also has antibacterial properties that work wonders on disinfecting and cleaning dirty grout. Use a damp microfibre cloth to rub the Epsom salt onto the grout.
Spray the grout with a 50/50 mixture of white vinegar and water. I used a tooth brush to do some scrubbing, you can use a grout brush too. Let the solution sit in the grout lines for about 5 minutes, then wipe up and rinse thoroughly.
Like vinegar, peroxide is cheap, widely available, has a variety of properties and is relatively safe. It also works great as a grout cleaner! Add 1/3 cup hydrogen peroxide and 1/2 cup white vinegar to 1.5 gal of hot water. Add 10-15 drops of your favorite essential oils for a better scent.
Salt Scrub
The bacteria-killing ability of salt is useful for cleaning tiles and grout as well. To use salt as a cleaning solution, simply keep the affected area wet or rub it with a damp cloth and then sprinkle a generous amount of salt over the surface.
Clean bathroom grout by mixing equal parts of Epsom salts with liquid dish detergent. Apply the mixture to the grout and scrub away the grime with a brush.
Yes, hydrogen peroxide is a natural neutral cleaner that is safe to use on grout. Hydrogen peroxide and baking soda produce oxygenated bleach, which is highly effective for cleaning grout.
If you're trying to clean grimy grout between your bathroom shower or floor tiles, then OxiClean™ bathroom cleaners are here to help! They get rid of grout stains on vertical and floor tiles for a refreshed bathroom.
Start by combining four parts water and one part white vinegar (hint: add more vinegar to increase the cleaner's strength). Pour into a bucket or spray bottle and apply the water and vinegar mixture to the tile surface. Scrub the area using a cloth, nylon pad, or a mop.
To mix homemade grout cleaner all you will need is blue dawn and warm to hot water. You will start by pouring a dime-sized squirt of blue dawn into a trigger bottle (preferably a 32-ounce bottle). Make sure the spray can be adjusted to stream and not spray. Then fill with water and lightly shake.
It works on the tile and the grout, effectively cleaning everything from hard water stains to mold and mildew stains to soap scum.
Here's a few DIY grout cleaners you can try: Make a spreadable paste with 3/4 cup baking soda with 1/4 cup hydrogen peroxide and 1 tablespoon of mild dish soap. Add more baking soda or peroxide if the mixture is too runny or thick.
Cleaning grout with vinegar is a popular solution to keep your bathroom shiny. Create a solution of half water and half white vinegar – you could also use brown vinegar, but it tends to have a stronger smell which you may not wish to have anywhere besides your chips.
Mix equal parts of distilled white vinegar and warm water in a spray bottle. Spray the solution on the grout, working on one small area at a time. Let the mixture sit for 5 minutes. Thereafter, scrub the area with a brush or a stiff toothbrush.
Some professionals swear by a simple mixture of baking soda and peroxide to clean grout. Hydrogen peroxide is an acid, and baking soda is a base compound. Mixing the two together creates a reaction that can penetrate the grout lines and free dirt and debris.
To clean your grout, combine one-part 3% hydrogen peroxide and one-part water into a spray bottle. Spray your grout generously and let the solution sit for about 1 hour, to allow time to work. Rinse the area with water and wipe clean with a microfibre cloth.
If you're a die-hard DIYer, using Dawn dish soap alone can be a safer option for mild cleaning. Dilute a small amount of Dawn in warm water, scrub the grout with a soft brush, and rinse thoroughly.
To make your own grout cleaner, mix 1 tablespoon liquid dish soap, ½ cup baking soda, and ¼ cup hydrogen peroxide together in a squeeze bottle. Allow the mixture to stand for 7 to 10 minutes, then apply to wall tiles, floor tiles, and countertops wherever the grout is dirty.
Just a few more important points: As the grout can absorb the soap as well as a stain, do not clean with oil or wax based cleaners (Murphy's Oil soap, Pine Sol, etc.). These products will leave a waxy or oily film in the grout.