Dirty or worn flame sensors, blower motor problems, clogs in the condensate lines, and electrical issues are some of the many problems that can leave your HVAC system failing to deliver the temperatures you've programmed in your thermostat.
Clean the Thermostat
Sometimes, when the room temperature doesn't match the thermostat setting, the problem could be dirt buildup on its interior parts. A dirt coating around the inner components may create excess heat and cause the thermostat to give the wrong readings.
At the heart of your thermostat's functionality is its temperature sensor. If your thermostat is not reading correctly, it might be due to a dirty or faulty sensor. A quick fix could be to gently clean the sensor with canned air to remove any dust buildup.
That usually means that the thermostat sensor is faulty. You have two options. Change the thermostat, or simply ask for a higher temperature. So press the up arrow a few times to change the 74 to 78 and you should feel warmer.
Some of the most common thermostat issues include:
The thermostat is broken, not properly level, or dusty. The thermostat needs to be recalibrated. There is loose wiring causing a thermostat issue.
Radiators might not be getting hot due to trapped air requiring bleeding, a malfunctioning boiler or central heating pump, thermostatic radiator valves that might be stuck or set too low, or the central heating system having sludge or rust which causes blockages.
Another problem that can cause your house to be hotter than what you've set the thermostat to is if your home's HVAC system isn't sized properly. An HVAC system that's too large for your house will cool your home unevenly. It will only cool some rooms off and then shut off versus cooling down the entire house.
For many of us, 70 degrees is the ideal indoor temperature, but when it is close to 100 degrees outside, your AC unit will be working quite hard to meet these expectations. Consider setting your thermostat at 75 degrees to 80 degrees in your home if the outside temperature is approaching triple digits.
As simple as it sounds, a dirty thermostat could be why the thermostat room temperature and setting do not match. Gently cleaning the thermostat interior with a clean, soft paintbrush is the best way to avoid further damage.
Your AC might not cool properly due to thermostat issues, an undersized unit, or extremely high outdoor temps—so check those first. Keep an eye on airflow—replace clogged filters every 3 months, and make sure vents and ducts aren't blocked for efficient cooling.
If your thermostat is not reading correctly, it might be due to a dirty or faulty sensor. A quick fix could be to gently clean the sensor with canned air to remove any dust buildup. However, if problems persist, replacing the thermostat could be the next step.
If you're cold even though your thermostat indicates you shouldn't be, your furnace likely isn't the problem. In most cases, it's working just fine. It's your home that needs attention. Lack of insulation, severe air leakage, and/or unbalanced ductwork are frequently to blame.
The Thermostat Has No Power
An unresponsive display is a sure sign of thermostat failure. A blank screen indicates dead batteries, a tripped safety switch or a major malfunction in the thermostat's components.
Using an appropriately sized screwdriver, turn the calibration screw to open the contacts. Wait a few seconds, then turn the screw to close the contacts. This will reset the contacts and make sure a bad connection wasn't causing your thermostat to become uncalibrated.
Yes it is normal. It has to do with the "swing" or differential on your thermostat. This is the amount the thermostat allows the temperature to rise above your setpoint (or fall below setpoint for heat) before the system comes on again.
One of the most common reasons that your thermostat is incorrectly reading your home's temperature is that the temperature sensor is malfunctioning or has failed completely. Replacing a temperature sensor can be very difficult, so there are a few things you should try before you schedule a replacement.
Dirty or worn flame sensors, blower motor problems, clogs in the condensate lines, and electrical issues are some of the many problems that can leave your HVAC system failing to deliver the temperatures you've programmed in your thermostat.
If both your thermometer and your thermostat display the same temperature reading, the thermostat's accuracy and efficiency are good. A difference of 3 degrees or less is generally nothing to worry about. If the readings are different, there is likely an issue affecting your thermostat's function.
To reset mechanical thermostats, simply turn off the thermostat and flip the circuit breaker. This can be done by going to the breaker panel and turning off the appropriate breaker switch for 30 seconds. After turning the breaker back on, turn the thermostat back on and the thermostat should be reset.
Just because the outdoor temperature is above 100, the Ideal temperature to set your AC unit to doesn't change — it's 78 degrees. Higher temperatures in the home are to be expected when the weather is hotter than usual, but your thermostat can still be set the same as if it were a lower temperature outside.
Cooling a house from 90 degrees to 72 degrees typically takes about 2 to 4 hours, depending on various factors.
On average, an air conditioner running in good condition should take about 15-20 minutes to drop the temperature by 1 degree in a standard-sized room. However, factors like outside temperature, unit size, and insulation quality can affect this timing.
If your ductwork is leaking or damaged, it can draw hot air back into the supply ducts or let all of the cooled air escape. This can result in the AC system blowing hot air through the house. Ductwork leaks can also reduce the volume of air flowing through the system.
Locate the sensor, which is a small, round component usually positioned near the bottom of the thermostat. It may be labeled as “sensor” or “thermistor.” Using a soft brush or a can of compressed air, carefully clean the sensor to remove any dust or debris that may have accumulated on its surface.