Start-Up and Close-Down: For pools that are winterized, opening the pool is the first time of the year that pool shock is used, after the water chemistry is balanced. This helps oxidize particles, kill bacteria and algae and restore water clarity.
When opening your pool in the spring, we recommend shocking the pool after balancing the water chemistry. This will oxidize organic contaminants, control algae and bacteria, and can help in clarifying the water.
In general, you should shock your pool when: Algae begins to grow in your pool. The free chlorine level of your pool measures zero. The chloramines or combined chlorine level rises above 0.5 parts per million (ppm).
The ideal time to shock your pool is in the evening after all swimming is complete. In the evening because the sun will not be boiling the chlorine out of your pool, and after everyone is done swimming because shocking is going to bring the chlorine level up to a level that may be irritating to skin and eyes.
Although vacuuming should be combined with pool shocking, it's better to vacuum the pool before you shock the water. A good scrubbing and vacuuming of the pool walls and floor will ensure that dirt and debris that can affect the water chemistry is removed before the chlorine is added.
Vacuuming After Shocking
However, after shocking the pool, you shouldn't vacuum for at least 24 hours. Running the water pump during this period will allow the shock to do its job.
INITIAL STARTING DOSAGES :
Maintain chlorine at a minimum of 1.5 ppm and up to 3 ppm. The more swimmers you have and the warmer the water is, can double your pool's chlorine consumption. Add whatever amount of chlorine it takes to maintain a 1.5 ppm chlorine..
Shocking your pool isn't necessary, although, it's not a bad idea either. If you get an extremely heavy rain fall, you could shock your pool for good measure. This will help fight off any contaminants that the rain may have brought to your pool.
Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water. You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you're using.
It Should Not Be Done Together
This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM. Only then should you introduce algaecide to get the best results.
Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly. Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock.
The best time of day to shock pool is when the sun is down. So, experts recommend shocking your pool in the evening or at night, to make sure it does its job. Shocking during the day can be ineffective as UV rays from direct sunlight significantly reduce free chlorine levels.
Running your pool pump during a lightning or electrical storm should be avoided as a power surge or nearby lightning strike could damage your pump. However running your pump during is beneficial. The extra filtering will help clean out the impurities rain has introduced into your pool's water.
Actually, they come out after rains because the water allows them to easily move above ground. Worms breathe through their skin, and their skin needs to be wet or moist in order for that to work. Basically, it rains and worms shout “road trip.”
Remember, rain is acidic. Hence, pool overflowing from rain causes the Alkalinity and pH levels to lower. Very low pH causes pool water to turn very clear and acidic, which destroys your pool surface and equipment.
Before shocking the pool, be sure that you have properly balanced the Total Alkalinity, pH, and Calcium Hardness levels, and have addressed metals in the pool.
Once the pool is opened and the floor and walls have been brushed the first chemical you should add is chlorine to shock it. It's recommended you add a gallon of liquid chlorine or pound of granular chlorine for every 5,000 gallons of water in the pool. You can also add more chlorine at the end of the opening process.
Let the pump run for about 6 hours or more and test the water. Don't use the pool right away – wait for the free chlorine levels to drop to 1 – 3 ppm before it is safe to swim.
Wait about 20 minutes after adding balancing chemicals to your newly filled pool, and you should be good to swim. Calcium chloride – If you have hard water issues, it's advised to wait about 2-4 hours before swimming after adding calcium chloride to soften your pool's water—or until one filter cycle has been completed.
After Shocking Your Pool
It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!
SKIMMER NOTES: No. Chlorine and shock are not the same thing.
Shock has a more intense chemical strength than the traditional chlorine sanitizers, and it also differs in how you should apply it to your swimming pool. Short answer: No.