Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock. Without tabs, the chlorine shock will dissipate quickly out of the water; without shock, the chlorine level will not get high enough to fully sanitize the water.
Types of Pool Shock. There are several types of products you can use to shock the pool. Typically, you will not use regular chlorine tablets as pool shock chlorine. Calcium Hypochlorite: Also referred to as cal hypo, this chemical is one of the least costly and most convenient ways to shock your pool.
SKIMMER NOTES: No. Chlorine and shock are not the same thing. Shock has a more intense chemical strength than the traditional chlorine sanitizers, and it als...
Adding chlorine besides the shock can increase the chlorine content in the water which can make the entire shocking process useless. Hence, it is better if you don't use the shock and chlorine at the same time. The best time to add chlorine to the pool water is after you have shocked the pool.
Non-chlorine is an oxidizer, meaning that it does a great job cleaning up oils and organic matter. However, it doesn't actually kill bacteria or algae—you need chlorine for that. Therefore, you always need to use non-chlorinated shock in conjunction with chlorine to keep your pool water healthy for swimming.
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
The main difference between Shock and Chlorine is that the shock is a high dose of chlorine, whose only function is to shock by raising the chlorine level in the swimming pool. On the other hand, Chlorine is a general sanitiser used to maintain a crystal and clear pool for swimming.
Similarities Between Liquid Chlorine & Powdered Shock
Similarly, both forms have a higher concentration of available chlorine than those used in daily chlorination. They also both kill nearly all living microorganisms, bacteria and contaminants with ease.
After you shock the pool — As soon as your chlorine levels reach 5 ppm or lower, it's officially safe to swim. Depending on the type of shock used, as well as the amount used, it can take anywhere from 24 hours or even up to a couple of days.
It Should Not Be Done Together
This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
The benefit of chlorine tablets is that the tablets slowly dissolve over time so therefore you have a supply of chlorine entering the water over a period. Chlorine granules however must be added so there is a higher risk that levels may drop if the hot tub is not attended to, adding risk of bacteria growth.
Common unscented household bleach (sodium hypochlorite) works well to shock a pool.
Liquid chlorine is preferred over chlorine tablets by pool professionals however home swimming pools will benefit too. Liquid chlorine quickly raises or maintains chlorine levels without raising stabilizer. Chlorine tablets maintain chlorine levels and add stabilizer to the pool water.
Pools can immediately turn green after shocking or adding chlorine when they have metals like copper or iron in the water. These metals oxidize when exposed to high levels of chlorine, which makes the pool water turn green. Metals in the water are caused by some algaecides and using well water.
After Shocking Your Pool
It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!
Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water. You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you're using.
Add one tablet for every 5,000 gallons of water and always round up. For example, if your pool has 21,000 gallons of water, add five tablets per week. If it has 8,000 gallons, use two tablets.
A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water. Running the filter after shocking for 24 hours to 7 days is necessary if the pool has a large amount of algae.
Sun Down – You'll want to shock your pool in the evening when the sun has gone down. This gives your pool plenty of time during the night to free the chlorine and clean the water. In the morning, you should be able to enjoy your pool. If you shock your pool during the day, the sun's UV rays will dissolve the chlorine.
Total Alkalinity (TA) is the first thing you should balance in your pool water. TA refers to the amount of alkaline material in the water. And since alkaline is a pH stabilizer, the number of alkaline substances in water will affect the pH balance.
You should not add all pool chemicals at the same time. You should also avoid mixing pool chemicals together. Adding chemicals at one time can cause dangerous chemical reactions and serious injuries. In addition, it will make it difficult to balance the pool.
Alkalinity Adjusting Chemicals for Pool Start Up
This should be the first chemical that you add to your pool during start-up. This one can really affect the pH level of your pool. Sorting this out first prevents you from ruining your hard work on your pool's pH level by doing it afterward.
A rule of thumb is 1.5 lbs. of baking soda per 10,000 gallons of water will raise alkalinity by about 10 ppm. If your pool's pH tested below 7.2, add 3-4 pounds of baking soda. If you're new to adding pool chemicals, start by adding only one-half or three-fourths of the recommended amount.
Fill your pool with water. You can use water from the hose that is chlorinated. Chlorine & hydrogen peroxide can mix together just fine. To start treatment, shock your pool with hydrogen peroxide by adding 250 ml (1 cup) of hydrogen peroxide for every 1000 liters (250 gallons) of water.