Machine polishing can remove any hard high spots or any other paint defects. You can apply the ceramic coating again to the high spots removed areas, Don't worry. There won't be any visible layering on the surface by reapplying.
Take fine finishing polish to it. It'll knock down the high spot. If you want you can reapply ceramic to that area, but finishing polish isn't strong enough to remove the coating before the high spot is gone. It's a very quick polish to fix.
Cheap and quick way is to use vinegar to remove the spots. Another option is to use CarPro Iron X, which is safe on ceramic coating, but just note that it smells so so very bad. After removing the spots you can use CarPro Elixir or even CarPro Reload.
2 Answers 2 Sand down the high spots using rough grit (100 grit) sand paper (they sell it to fit the sander - you'll find the sander in the drywall area and the sandpaper in paints) then smooth it with 200 grit. If you have low points, fill them in after sanding.
How long does ceramic coating last? For the most part, ceramic coatings last between two and five years. In some cases, they can last up to a decade, but this is pretty rare. However, there are many factors that affect their lifespan and might force you to replace yours sooner than you'd expect.
The application of a ceramic coating is labor-intensive, time-consuming, and somewhat expensive. As we've proven, though, all of these disadvantages are made up for by the long-term benefits of ceramic coating.
No Water Droplets: One of the functions of the ceramic coating is to ensure water droplets don't stay on the car's paint. Therefore, once water droplets fail to form a bead to roll off the surface, the ceramic coating is due for replacement.
Using a microfiber cloth to level the coating can be of great help if you find the high spot soon, I.e.just after you apply. When the coating cures, it becomes hard, and after a span of time, the hardness can't be levelled with a microfiber cloth. So make sure to look for high spots soon after your coat.
Some high-end packages use many layers of ceramic coatings. It is a gimmick for many of these packages, in any case. Yes, it is possible to have too much ceramic coating. After a certain point, subsequent layers cease to adhere, resulting in product waste and overcharging clients.
While ceramic coatings offer long-lasting protection, they don't last forever and will eventually break down and often require removal due to several reasons. However, the removal of ceramic coating can be a delicate process and should be done the right way to prevent damaging your vehicle's paint or clearcoat.
A high spot is a small area of excess ceramic coating that stands out from the rest of the surface. It looks like a tiny mountain or bumps on top of the surface of your car and can be a real eyesore.
Absolutely, but it's not recommended. As we stated above and talk about on our pricing page, paint correcting is the most labor intensive part of the a ceramic coating. If you get you vehicles finish looking perfect but neglect to protect it, you will find yourself needing correction much sooner than you think.
When you purchase a new car or have just had your paint refinished, a self-healing ceramic coating will let you effortlessly maintain the quality of your car's finish for years to come.
Gently rub the vinegar solution onto the spots, allowing it to sit for a few minutes before rinsing with clean water. The mild acidity of vinegar helps dissolve the mineral deposits, facilitating their removal.
A new ceramic coating application will take about 2-3 weeks to cure to its full strength. During that time, some precautions should be taken.
Buffing your ceramic finish with a microfiber towel is the first step in reducing high spots. If the coating hasn't yet hardened, this will remedy the problem 99 percent of the time. Unfortunately, once the coating has dried, it becomes very hard to level with a microfiber cloth.
The lesson is simple: unless your goal is to strip the ceramic coating off your car, keep the polish away. Car wax and polish are not the same. Car waxes with ingredients like carnauba wax and synthetic shine polymers are perfectly safe to use—and even recommended to use—on top of ceramic coatings.
The thesis of this article is straightforward: ceramic coating can significantly boost a car's resale value by protecting and preserving its paint, creating a showroom-like appearance that appeals to potential buyers.
Unfortunately, no. Ceramic coatings are not standard finishes for vehicles, so polishes are not formulated to work with them. If you use polish on top of ceramic coating, you will strip the coating off of your vehicle, leaving it patchy and damaged.
Because of its restorative properties, applying a polishing compound to your ceramic coating would simply strip away this protective layer, leaving your car with nothing but the exposed clear coat. While this is great for removing old layers of wax, it shortens rather than extends the life of your paint sealant.
Your commitment to maintaining your ride plays a crucial role in determining the lifespan of your ceramic coating. Now, let's unveil the timeline. On average, a ceramic coating can last anywhere from two to five years. That's right, you can enjoy the benefits of this protective shield for a significant chunk of time.