Crown molding should be nailed into the studs, but for baseboards it's probably okay to go rogue since you've got gravity on your side and all. If the corner pieces seem like they'll have a teeny gap between them, add a dab of wood glue before you hammer them in.
Yes; you can use glue. They have specific bonding glues for baseboards and other house projects.
Hitting studs is best, especially if your wall isn't quite straight (helps hold the baseboards against the wall), but for a lot of the nails with our baseboards, we didn't hit studs. Tried to, as often as possible, but missed fairly often.
Use an X pattern with two nails crossing over each other to attach trim to the wall that won't go into a stud. This will securely anchor it in to the drywall.
Glue is less forgiving than nailing when removing or repositioning baseboards. The potential damages from the glue can impact the appearance of your baseboards and lower the quality of your home.
You can still install objects on walls — even if there's no stud available. You just need to use drywall anchors. Drywall anchors live up to their namesake by anchoring into drywall panels. You can push them into a pilot hole.
One at a time, hold them up against the wall and nail them in using a hammer and finishing nails. Crown molding should be nailed into the studs, but for baseboards it's probably okay to go rogue since you've got gravity on your side and all.
Lighter or smaller items, such as: picture frames, canvases, shadow boxes, clocks, decorative plates, can safely be hung with a nail or brass picture hanger without a stud. Make sure to choose a nail sized according to the weight of your piece.
Use the hammer to attach the baseboard molding.
Use a wall stud finder to work most effectively. You may also perform a knock test on the wall to identify the empty spaces between the studs. Insert two finishing nails into each stud at the base of the baseboard. Using a nail set, hammer the nails in at a steep angle.
Which adhesive is best for baseboard installation? When it comes to installing baseboard trim, you can't go wrong with a great quality, high-strength adhesive from Lepage's premium line of sealants. If you would like to reduce the need for nails, opt for LePage No More Nails All Purpose Construction Adhesive.
Attach the baseboards to the studs, using finishing nails and a brad nailer. If you don't have a brad nailer, a hammer will do. Nails should go in at a slight downward angle, near the top and bottom of the board.
It's easier to glue baseboards to the wall than to nail them. That's especially true if the baseboard is less than 4 inches in height and not very thick or if the room itself is on the small side.
A baseboard height that's approximately 7% of the wall height provides for a solid and definable base without being too big. The overall proportion of baseboard to wall height will be comfortable and pleasing. So in a room with a 9 foot high ceiling, a baseboard that's about 8 inches tall works.
Each nail should be spaced out about 16 inches. Use a stud finder to find where to start nailing the top portion, then put a nail every 16 inches in either direction from there. Do the same for the bottom of the trim.
Vinyl Baseboard
It's also fairly easy to install, making it a simple weekend project you can do on your own. Sold in rolls, vinyl baseboard can be easier to work with than wood, and typically has a long life span, requiring little maintenance.
If there is only one option left to hang nail directly into drywall, In this case it's most important thing that you need to know much much weight nail can wear. It should not exceed 10 pounds of weight.
If you're using a hammer, simply line up your nails with your studs, insert the nail and start hammering until the nail reaches its end. Use the nail set to get the nail beneath the baseboard so it can be filled and painted without a trace.
The holding strength of a screw in drywall is very close to nothing. Anyone can easily tear a screw out of drywall with just their bare fingers. If you need to mount something to a wall, you either need to hit a stud or you need to use a hollow wall anchor.
Use a stud finder to mark stud locations on the wall. When attaching baseboards, use 8d finish nails, driving them at a slight downward angle near the top and bottom edges of the board. For a cleaner finish, use a nail set to drive the nail heads just below the wood surface.
If you plan to install baseboard moulding before adding carpet, it needs to be installed 1 inch above floor level to allow room for both pad and carpet. If adding baseboards after carpet is laid, it should be installed at the same height as without carpet.
The short answer is – it depends. Picture hooks do not necessarily require a stud in order to be functional and useful. The best rule of thumb to apply is that heavy items (think: mirror, heavy frame etc.) will require a hook that is anchored to a stud.
If you are securing wood to drywall where there are no studs, use a strong construction adhesive. Only use nails if you are securing trim and baseboards. Mark your hanging point with a pencil. Take a nail-set, awl, or nail, and with a hammer tap a “pilot hole” into the wall.
Anchors. Anchors are some of the easiest ways to hang anything in the walls without a stud. These work in different ways to keep screws from slipping out of their holes or otherwise damaging the drywall.