Waiting to deal with your toilet's clog for a few hours can be harmless. But, waiting longer than that can cause some issues that you probably want to avoid, including: Overflows: Some toilets have small leaks that run all of the time.
Wait about 10-15 minutes before trying to unclog the toilet, as some water might drain on its own. Squeeze a lot of liquid dish soap, about one cup, or pieces of bar soap into the toilet bowl.
Caustic soda is a nasty chemical that can burn, but it's very effective for unclogging toilets. To use this chemical, you need to get some rubber gloves and eye protection. You can pick the chemical from the local hardware or grocery stores. Pour a ¾ gallon of cold water into a bucket, and add 3 cups of caustic soda.
You might want to see if the clog works itself out in time. If you have another toilet you can use, let the clogged one set overnight. The water pressure that builds up in the bowl might actually cause the toilet to unclog itself. After a day's wait, flush the toilet again.
One of the most popular methods of unclogging a slow draining toilet is using hot water and liquid soap. Pour the boiling water into the bowl and then add the liquid soap. Let it sit for about 15 minutes before flushing.
Pour 1 cup baking soda and 2 cups vinegar into the toilet.
Distilled white vinegar is commonly used, but any type of vinegar will work. The mixture will fizz a great deal. If you don't have baking soda and vinegar on hand, try adding a few squirts of dish soap to the toilet bowl. The soap may help to loosen the clog.
The most common causes for a slow-draining toilet are: A clog in the drain line. A blockage between the tank and bowl. Poor or Clogged Venting.
If you find that your toilet bowl still drains properly — but slowly — then the issue may lie in the jet holes that surround the rim of the toilet bowl. The build-up of sediments and minerals along the side of these holes can gradually reduce the water pressure released with each flush.
So, let's recap the common reasons why a toilet won't unclog — excessive toilet paper use, non-flushable solids, hard water, and clogs in the main sewer line. Thankfully, they can be prevented via methods like double-flushing, covering the toilet bowl, routine inspections and dealing with tree roots.
Bleach is an effective way to deal with blocked toilet drains as it is a dilute solution of sodium hypochlorite and also contains a high chlorine concentration. Using bleach by itself or mixing it with boiling water are effective ways to unclog a toilet.
How to Tell if Your Toilet is Clogged. Signs that your toilet (or sewer line) is blocked include: The water does not flush properly, stays in the bowl for long periods or ends up overflowing over the top of the bowl. When the toilet is flushed, water starts to gurgle up in your shower or bathtub drain.
Try To Soften the Clog
Put a soap dish, shampoo, or slivers of bar soap in the bowl. Then heat a gallon of water to the temperature of hot tea, pour into the bowl, and wait about 20 minutes. Baking Soda and Vinegar - Try a safe chemical reaction. Measure one cup of baking soda and pour it into the toilet bowl.
Check water level in toilet bowl
Listen for a gurgling sound from the drain (a good sign) and check the water level in the toilet bowl. If nearly all the water drained from the bowl, then you've probably cleared the clog.
Coke and Pepsi are loaded with phosphoric acid, which breaks down the buildup that can clog your drains! Phosphoric acid can even remove lime scale and another tough buildup that regular cleaners struggle with. This is an effective and refreshing home remedy if we ever saw one!
Using too much toilet paper
This is probably the most common reason toilets get clogged — and often the easiest to deal with. If we're honest, most of us are probably guilty of this one. If you're one of the many people who use a lot of toilet paper when you use the bathroom, here are a few tips! Do a double flush.
While you can use a regular drain snake in a toilet, a closet auger, or toilet auger, is a type of drain snake specifically designed for use in a toilet. Its unique design and protective rubber coating allow it to maneuver through the tight S-bend in a toilet without damaging the porcelain.
Toilets can develop drain clogs for any one of several basic reasons, usually involving partial or complete obstruction in one of the various parts of the drain system: the toilet trap, the branch drain line, the vent pipe, or the main sewer line.
Plunge-in well:
The plunging process needs to be down slowly; operating anything by force will ruin the bathroom with water. After the primary gentle plunge, forcing the air out they dig into plunging in and out strenuously, keeping the seal intact, for 15 to 20 times until most of the clogs are not unclogged.
Pour Dish Soap into the Toilet
You can pour about a quarter-cup of liquid dish soap into the bowl to create the perfect recipe that removes a clog. It takes about ten minutes for it to work its way into the trap or drain to start loosening stuff up. Add hot water to the toilet bowl after ten minutes.
When a toilet has a clog made of water-soluble materials, it has a chance of slowly dissolving in the water and freeing up the toilet to work properly again. So, clogs that are primarily made of toilet paper can clear themselves.