Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
Bleach is commonly used to whiten concrete and is very effective at doing so if the initial stain is removed beforehand. Bleaching stained concrete white prepares it for any additional coloring treatments that you may wish to apply in the future.
A simple solution of household bleach poured onto the problem area followed by a hot water rinse can remove dirt, grime, mold, and mildew. In certain instances, using a scrubber or a broom with a bleach solution can release embedded dirt.
In fact, vinegar removes mold from concrete better than bleach. Bleach will only remove the top layer of mold, causing the mold to return.
Dish soap and water: Dish soap is a degreaser, and it works well to clean oily and grimy concrete. Create a cleaning solution of warm water and few drops of dish soap and apply it to the surface. Let it sit for a while, then mop the patio and rinse it with fresh water. Repeat the process as many times as needed.
Vinegar and Baking Soda
Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.
1. Best Overall Concrete Cleaner—ZEP Purple Pressure Wash. Zep concrete cleaner has several great products, and the ZEP Purple Pressure Wash outdoor cleaner is no exception. This alkaline cleaner is low foaming and easy to rinse from the concrete surface.
Although the concrete is disinfected after just 5 minutes, lightening it will take a little longer. Leave the bleach solution on the concrete for about 20 minutes, then sweep briskly with the stiff broom to dislodge the softened grime. Use the scrub brush to tackle stubborn areas. Rinse off the patio.
After disinfection with bleach solutions, surfaces should be rinsed and dried. Bleach can be irritating to skin and mucous membranes, so any residue should be removed prior to returning animals to the environment.
Pour ⅓ cup of Clorox® Disinfecting Bleach into 1 gallon of water in a plastic bucket or container. Apply bleach solution using a brush or broom on horizontal surfaces, and a sponge or mop on vertical surfaces. Heavily soiled surfaces may require additional scrubbing. Wait 6 minutes for disinfecting.
Leave the Bleach on the Pavers
Allow the bleach to sit on the pavers for about 10-20 minutes. This will help to disinfect and clean the surface. It will also help remove any stains that are tough to remove and mold.
Scrub the concrete with a nylon-bristled brush and then rinse thoroughly with the garden hose. For extremely heavy stains, a power washer provides a much stronger stream of water to blast away the grime. Use a hose to rinse greenery after the patio is clean.
Allow the bleach solution to contact the surface for up to 15 minutes.
Yes, vinegar is an excellent concrete cleaner. This solution can strip surface-level messes from concrete. Due to its acidic properties, vinegar can be a powerful tool for breaking down offensive materials such as dirt, stains, and bacteria.
Mixing vinegar and bleach together releases a poisonous chlorine gas, which can be fatal if inhaled at high enough concentrations.
Use a mild grease-cutting detergent such as Dawn or Ajax dishwashing liquid mixed with water and a natural or synthetic bristle scrub brush to help brighten the patio surface. NOTE: Never use a wire brush as it can leave rust stains and scratch the concrete surface.
A hose or pressure washer can help remove mold, mildew or water stains from concrete patios and driveways. If staining persists, use a mold remover or bleach solution to treat the area. Then scrub the stain with a brush and rinse thoroughly with clean water.
Another relatively safe and environmentally friendly solution for cleaning concrete is an oxygen bleach product, such as OxiClean. Just be sure to wear rubber gloves, as bleach products can be tough on skin. Sprinkle the powerful solution over the entire patio and scrub it with an ordinary push broom.
Mix a solution of 1/8 of a cup liquid dishwashing detergent, ½ cup baking soda, and one gallon of water. Use a soft brush to scrub the mixture into the stain. Rinse, or use sawdust to absorb the soapy water. Sweep the sawdust away.
Vinegar Solution
Vinegar is the perfect option in such cases. Used similarly to bleach, vinegar is known to kill many species of fungus including harmful mold. Spraying a vinegar solution (1 cup of vinegar per gallon of water) onto the surface, saturating it fully, should kill most strains of mold.