Chemicals that you add to your pool while the water is circulating don't need to be recirculated; they will stay mixed even if you don't pump the water continually. Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.
Many of the INTEX pump/filters are NOT UL rated and you should not swim with them plugged in. They do have one or two that are UL rated and can be left on while swimming. Just about all other pool equipment brands can be used while you are in the pool when properly installed.
Your pool can keep running for a few days with no problems while without a pump. However, know that a standard pool needs a pool running for at least once in 24 hours, or you might notice an algae bloom. So, it's best to have your pump ready as soon as possible.
But ungrounded pool pump motors pose the serious threat of electrocution. When a device or product is defective, improperly installed or maintained, or if a component of that device is worn or frayed, anyone who comes in contact with water charged with an electrical current is at risk of electric shock drowning.
A pool can only be safe for swimming without a pump for a few days and a maximum of one week. The definite number of days the pool will be safe will also depend on the temperatures of the water, the weather at that particular time, the level of chlorine, and how clean the pool was before the pump stopped functioning.
Well-known member
The Intex manual states that the pumps should not be running while people are in the pool.
The extra filtering will help clean out the impurities rain has introduced into your pool's water. Pool pumps are made to withstand rain and it is beneficial to run your pump during or after rain.
Is It Safe To Run The pool Pump With The Pool Cover On? It is safe to run the pool pump and filter with a swimming pool cover on. The pool cover doesn't in any way stop or hinder the pool pump from circulating the water or carrying out its function.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
While you may be using your swimming pool less frequently as fall activities start to take over, there is one important thing to remember: Do not turn off your water pump.
So if you have to leave it running for a week it shouldn't make a big dent in the electric bill. Having to spend the money on getting the pool back in shape will probably cost more than leaving it on anyway. I would make sure you fill the pool water as high as you can though since you will be gone for a week.
To prevent potentially dangerous electrical issues, it's imperative that you turn off the power to your pool equipment — such as pumps, motors, filters, heaters, chlorinators, and lighting fixtures. Even if you turn off the power to your pool equipment, it can still be damaged by wind, rain, and debris.
After the storm
Once the storm has cleared, the first step should be to remove any debris before it settles and contaminates the water. Next, drain the excess water; and then, check and balance the chemistry of the pool water before running the pool filter until the water clears.
Answer: It should not matter much. It could help to filter debris and contaminants the rain washes into the pool. However, lightning can be a concern with the filter running.
Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
For energy efficiency best time to run the pool's filtration system is during off-peak hours when the electricity demand is lower. This time is typically between 8 p.m. - 10 a.m. Also, to warm the pool you can run it during the day, to cool it at night.
One of the most important factors in keeping your pool clean and swimmable is pool circulation. And that is generated by the pump, which is the first component of your pool's filtration system. The pool pump pulls water in, and then pushes it out through the filter.
Pool Water After a Storm
It is a good idea to clean or backwash your filter after a heavy rain, flood, or major storm. This will help prevent your pool from turning cloudy or green. Clean out the debris in all of your baskets. Use a net or vacuum to get all debris out of the pool.
Rainfall dilutes pool chemistry levels and lowers the readings for pH, alkalinity, hardness, stabilizer, and chlorine. Rainfall does not contain chlorine. As well, rainfall brings with it small amounts of contaminants that are washed into the pool.
Use shock treatment on your pool one or two days before the storm. Add chlorine levels significantly during the treatment and let it run for 24 hours to allow the treatment to fill the entire pool. Make sure all furniture or items around your pool are safe to prevent injury to persons or property.
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
You cannot run your pool pump every other day because the standing water can pose a health risk as it can quickly accumulate bacteria and fungi. It is crucial to run the pump every day for 8 hours (in one or multiple sessions), so the entirety of the pool's contents run through the filter once.
If you don't, the pool will have decreased water flow which means reduced filtration and ultimately, the dreaded algae bloom. The pump basket should be cleared out weekly and even more frequently during the fall and spring when there is more debris in the pool.
Without Chemicals
If a parent chooses not to use chemicals in the kiddie pool, the water must be drained after the children are done using it. This should occur within 24 hours. That means the parents must go through the hassle of filling the pool with fresh water each day.
A pump does not need to run 24/7 to keep your pool water pristine. If properly sized, a pump should spin through your water in a fraction of the time, allowing it to be dormant for the rest of the day. Thereby, relieving your wallet of the heavy burden of high electric bills.