Clean stone surfaces with warm water and a mild soap such as a clear Dawn Liquid Soap. Do not use products that contain lemon, vinegar or other acids on marble or limestone.
Non-acidic dishwashing soap such as Dawn can also work well on these floors, but you must be sure to rinse them well so that the soap won't leave a film.
Luckily, everything you'll need to clean your hard surfaces can already be found in your home: Concentrated dish soap that's tough on stains and grease while staying gentle on stainless steel, granite, and glassware, like Dawn® Platinum Powerwash Dish Spray. Soft cloth and sponge.
Wash the area several times with mild soap and warm water. If the stain persists, use a small amount of hydrogen peroxide diluted in warm water to gently wash the area. This should remove the worst of the discoloration. If all else fails, get in touch with your countertop contractor for help.
If you have a quartz countertop, you should be able to use Dawn Dish Soap without any issues. However, if you notice any discoloration or staining, you might need to switch to another brand of dish soap.
Look for terms such as “soft” and “gentle on hands.” Among the recommended dish soap brands are Palmolive, Ivory, and as mentioned earlier, Dawn. Avoid anything that says “antibacterial” or “industrial strength” or the like, as these usually spell bad news for marble countertops.
It's essential to only use cleaners which are appropriate for natural stone surfaces. This means avoiding using vinegar. Stones like limestone, marble, or travertine will react to vinegar because it's an acidic cleaner with harsh effects.
Acidic commercial cleaners and those containing harsh chemicals, like bleach, can damage and dull natural stone surfaces.
General Steps for any kind of Natural Stone Surface:
Sweep to remove any dirt particles. Fill a recepient of warm water and use only water, or mix it with a small amount of neutral liquid “All-Purpose-Cleaner”, detergent or cleaning solutions specific for stone. Change the solution when it starts to get dirty.
Quartz is an incredible material and easy to clean.
The beauty of natural stone with the durability of a manufactured one. For heavier stains, glass or surface cleaners will do the trick since quartz is non-porous and you don't have to be as finicky with the pH as you would with granite.
Clean stone surfaces with a neutral cleaner, stone soap, or a mild liquid dishwashing detergent and warm water. Similar to any item cleaned in your home, an excessive concentration of cleaner or soap may leave a film and cause streaks. Follow manufacturer recommendations.
DON'T: Use harsh or abrasive cleaners and sponges.
Windex; acidic cleaners, like vinegar, lemon, lime; or anything with ammonia or bleach should be avoided. Frequent use of these chemicals will dull and weaken the sealant over time.
Baking soda is known as a stain remover. It can help to remove liquid stains such as tea, wine or coffee. It also helps to remove the unpleasant smells. It is quite affective on solid surfaces in general but it is not advised to use baking soda directly on natural stone surfaces.
“Dish soap does have a way of leaving streaks if it isn't rinsed,” says Jessica Ek of the American Cleaning Institute. What to use instead: “A product formulated to clean a particular surface or material is always the most effective option,” Ek says.
Clean showers and bathtubs.
Yep, Dawn will cut through the grease from your body just like it does the grease from food! It also cleans soap scum. Just squirt it all over the tub and use a stiff-bristled brush or broom to lather and scrub it away.
Here's a list of the top 3 pH-neutral dish soaps: Mrs. Meyer's Clean Day Dishwashing Liquid. Dawn Dish Soap Platinum.
Keep It Simple to Clean Natural Stone
You can use any type of mild soap detergent, such as dish or hand soap, and mix it with a little water. Wet the stone first, and then use a bristle brush and soap solution to wipe the stone clean. The last step is to make sure you rinse thoroughly.
Using a sealer on natural stone helps to protect it against stains, while also giving you a little extra time to clean up any spills that may occur on your surface. It's important to note that while sealant does provide an extra barrier for your stone, everyday wear and tear will often still cause it to etch.
Staining agents commonly present in the kitchen, bathroom and other areas where natural stone is used include: Organic materials, such as wine, fruit juice, food scraps, tea/coffee and leaves. Oils, such as cooking oil, cosmetics, grease and oil-based paint. Ink, such as pen or marker.
Dawn dish soap is by and large the best of the mild detergents to use. It is gentle enough to keep your finish on your deck, but strong enough to remove tough stains.
Quartz is 100 percent a natural material made up of a white or colorless mineral.
Both quartz and quartzite are beautiful materials. There are differences between the appearance of the two materials, but as quartzite is a natural stone and quartz is manufactured, there is a huge amount of variance to account for when comparing appearance.