The vast majority of porcelain tiles are 6mm to 10mm thick and a tile in this range will serve most purposes. Wall tiles typically range from 6 to 10mm thick. Mosaics and decorative wall products also range from 6 to 10mm thick to make combining them easier.
Usually ships out within 1-2 business days Tile Size: 12" x 24" Thickness: 3/8” Nominal Material Type: Porcelain Finish: Matte Box Coverag...
Tile Sizes
Floor tile is usually 1/2 inch to 3/4 inch thick, manufactured in squares measuring 4 inches by 4 inches up to 24 inches by 24 inches. Other shapes are available, such as rectangular or subway tile, octagonal and hexagonal shapes.
Porcelain tiles are also available as thick as 50mm; however, this is hardly ever necessary. The common Porcelain Tile thicknesses are 6 – 10mm for internal floors, and 20mm thickness for external use.
You might want a thicker, more durable tile for a floor with high traffic, while a thinner, lighter porcelain tile is better suited for wall application. The least durable type of porcelain tile, Grade 1 tile is intended for use on walls only. It is not recommended for floors or countertops.
Porcelain tile is highly durable. Because it is extremely hard and dense, this tile resists wear, scratching, chipping, and cracking. That makes it an exceptional choice for homes with pets and active children.
Check the slip resistance: If you're using porcelain tile in a bathroom or kitchen, choosing porcelain tiles with a high slip resistance rating is essential to prevent accidents. Porcelain floor tiles with an R rating of 10 are the most slip-resistant.
Porcelain tiles are the perfect solution for kitchen and patio tile floors. Made from sand and hard stone like quartz or granite, these tiles are water-resistant and highly durable. Porcelain tiles are very strong and can take the weight of heavy furniture and cars during strength tests – they last decades!
The use of thin set mortars has met the challenge of properly installing ceramic and porcelain tile for years at a minimum thickness of 3/32” to a maximum of about ¼” (depending on the manufacturer's recommendations) after the tile is imbedded.
As porcelain tiles are heavier than their ceramic counterpart, they may be more difficult to install, especially when used on the walls. It's also possible that, if too heavy, it may be unsuitable for certain walls or exceed the maximum weight allowance for some substrates.
The terms thinset cement, thinset mortar, dryset mortar, and drybond mortar are synonymous. This type of cement is designed to adhere well in a thin layer – typically not greater than 3/16th thick. For example, a 3/8″ notch trowel will produce a 3/16th inch thick coating after the tiles are pressed in to the cement.
Tile set by the thinset method is adhered to the substrate with a thin layer of "thinset" cement. This type of cement is designed to adhere well in a thin layer - typically not greater than 3/16th thick." Tile substrates are allowed 1/8" of variation from one area to another (and typically have more than that).
Tile thickness is different from the thin layers. Usually, a thin layer 3/16 inch to 1/8 inch thick under the tile. For smooth tiles on the back, 3/16 inches are thin enough to attach the tile to the floor or pad. For natural tiles with uneven back, you may need to lay a 1/8 inch thin layer during installation.
The thickness of most Thin Porcelain Slabs (6 mm) is about half of a typical porcelain tile (9-12 mm).
Porcelain tiles are denser than ceramic, and therefore less porous. Meaning they're harder, therefore more durable and absorb less water. This makes them more suited to high footfall areas which will see heavy use.
A large tile, such as 12x24”, usually requires a 3/16” grout line, so it's best to check the manufacturer's recommendations to see how small you can go.
The most common tile mortar is thin-set; however, while installing porcelain tiles 12x24, we recommend that you use medium-size or mastic mortar because it has higher holding power than thin-set.
Answer: Yes, porcelain and natural stone tile manufacturers recommend the use of a polymer modified mortar for installation of large format tile to concrete, plywood and synthetic membrane surfaces. TCNA recommends the use of mortars meeting ANSI A118. 4, A118. 15 (improved performance cement mortar) and A118.
- Thin porcelain tile (TPT) AKA thin porcelain panels, are characterized by their minimal thickness of anywhere between 3 to 6 mm and a dimension of up to 5x10 feet in length and width.
Take care to avoid exposing porcelain to permanent inks or dyes, as these might not be removable. If porcelain surfaces are exposed to permanent marker or dye, rinse the area with water as soon as possible then apply approved cleaning product. Rinse and dry thoroughly.
Although porcelain tiles offer exceptional durability, there are few products and techniques you should avoid at all costs. Never use a product that contains harmful chemicals such as ammonia or bleach (or any type of acid-based cleanser). These type of chemicals can alter the colour of the tiles and/or the grout.
Best for Cost: Ceramic Tile
As a general category, ceramic tile is less expensive than most porcelain tiles. But there is a surprisingly large range of prices for both types of tiles. Note that the very highest quality designer tiles tend to cost roughly the same for ceramic and porcelain.
Porcelain tile has a 60+ year life expectancy, so you definitely get your money's worth. It's perfect for walls, floors and indoor/outdoor installations. Rated for high-traffic areas, you won't have to worry about your porcelain floor degrading over time.
It comes in various styles, colors, and sizes and can be used to create stunning designs. Porcelain tile is typically mid-range in price, costing an average of $12–$40 per square foot.
1. Lower quality materials: The tiles may be made from lower quality materials, which can affect their durability and longevity. 2. Mass production: The tiles may be produced on a large scale, which can lower the cost per unit.