Clean stone surfaces with warm water and a mild soap such as a clear Dawn Liquid Soap. Do not use products that contain lemon, vinegar or other acids on marble or limestone.
When using Dawn Powerwash, you should avoid cleaning porous surfaces such as marble and other soft natural stones or untreated wood. It is also best to keep Dawn Powerwash away from painted surfaces, too.
Non-acidic dishwashing soap such as Dawn can also work well on these floors, but you must be sure to rinse them well so that the soap won't leave a film.
It's essential to only use cleaners which are appropriate for natural stone surfaces. This means avoiding using vinegar. Stones like limestone, marble, or travertine will react to vinegar because it's an acidic cleaner with harsh effects.
Modern Stone Care Stone & Tile Floor Cleaner is a neutral (ph 7) marble safe floor cleaner which is to be used for regular maintenance on any hard surface not harmed by water.
Baking soda is known as a stain remover. It can help to remove liquid stains such as tea, wine or coffee. It also helps to remove the unpleasant smells. It is quite affective on solid surfaces in general but it is not advised to use baking soda directly on natural stone surfaces.
Maintenance and Cleaning of Natural Stone Surfaces
Marble and granite are easier to maintain than you'd expect. Warm soapy water and a soft cloth will clean and shine on both surfaces. You can also clean with a stone specific cleaner formulated to be gentle and effective on stone surfaces.
“Dish soap does have a way of leaving streaks if it isn't rinsed,” says Jessica Ek of the American Cleaning Institute. What to use instead: “A product formulated to clean a particular surface or material is always the most effective option,” Ek says.
DON'T: Use harsh or abrasive cleaners and sponges.
Windex; acidic cleaners, like vinegar, lemon, lime; or anything with ammonia or bleach should be avoided. Frequent use of these chemicals will dull and weaken the sealant over time.
Dawn Powerwash is almost the same as regular Dawn, but it also has rubbing alcohol. This helps it remove more stains. It also spray in a foam, so it's easy to dispense and small amount.
Quartz is an incredible material and easy to clean.
The beauty of natural stone with the durability of a manufactured one. For heavier stains, glass or surface cleaners will do the trick since quartz is non-porous and you don't have to be as finicky with the pH as you would with granite.
Simple Green Granite & Stone Polish is safe for use on granite, marble, travertine, limestone, porcelain, ceramic, quartz, Corian®*, Silestone®*, and other natural and engineered stone surfaces.
Products that should never be used on these types of stones include vinegar, Scrubbing Bubbles, Tilex, Comet, etc.
When you use products such as Fabuloso or Pine-sol, they are not the correct products for cleaning your tile or stone. They can leave a residue behind that can dull your surface.
We've said it before (and we'll say it again) DO NOT use Murphy's Oil Soap on any natural stone surface. Following our 20 years experience and the Marble Institute of America's Maintenance Guidelines, we recommend a neutral PH rinseless stone soap, used with an unbleached clean nylon pad to clean stone.
Dawn & vinegar works better than store-bought cleaners.
I've tried myriad cleaners specifically for bathrooms~from Rain-X to scrubbing bubbles and beyond. I've never had any store-bought cleaner work better than this easy, inexpensive, DIY Dawn vinegar solution.
General Steps for any kind of Natural Stone Surface:
Sweep to remove any dirt particles. Fill a recepient of warm water and use only water, or mix it with a small amount of neutral liquid “All-Purpose-Cleaner”, detergent or cleaning solutions specific for stone. Change the solution when it starts to get dirty.