Dish soap and water: Dish soap is a degreaser, and it works well to clean oily and grimy concrete. Create a cleaning solution of warm water and few drops of dish soap and apply it to the surface. Let it sit for a while, then mop the patio and rinse it with fresh water. Repeat the process as many times as needed.
Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.
In fact, vinegar removes mold from concrete better than bleach. Bleach will only remove the top layer of mold, causing the mold to return.
Best Alkaline Concrete Cleaner—Sunnyside TSP
TSP stands for trisodium phosphate, and it's a heavy-duty cleaner that's sure to lift stains and dirt from concrete. Sunnyside TSP is an affordable and effective solution to messy concrete, particularly indoors as the phosphate can be bad if it reaches outdoor water sources.
Use a detergent such as Dawn or Ajax dishwashing liquid mixed with water to brighten a concrete patio that hasn't been cleaned in a while. Use a detergent such as Dawn or Ajax dishwashing liquid mixed with water to brighten a concrete patio that hasn't been cleaned in a while.
Yes, vinegar is an excellent concrete cleaner. This solution can strip surface-level messes from concrete. Due to its acidic properties, vinegar can be a powerful tool for breaking down offensive materials such as dirt, stains, and bacteria.
As a gentler cleaner, bleach can't harm concrete's durable material. Aside from being an effective cleaner and stain remover, it also acts as a disinfectant to the concrete surface.
You can use Simple Green Oxy Solve Concrete and Driveway Cleaner to clean a concrete patio with or without a pressure washer. It removes oil, grease, grime and most stains and discolorations. Its biodegradable formula is safe for lawns and pets.
Scrub the concrete with a nylon-bristled brush and then rinse thoroughly with the garden hose. For extremely heavy stains, a power washer provides a much stronger stream of water to blast away the grime. Use a hose to rinse greenery after the patio is clean.
Mix a solution of 1/8 of a cup liquid dishwashing detergent, ½ cup baking soda, and one gallon of water. Pour over the stain. Use a soft brush to scrub the stain away. Rinse the area.
Spraying a vinegar solution (1 cup of vinegar per gallon of water) onto the surface, saturating it fully, should kill most strains of mold. Vinegar spray can be followed by power washing or manual hand scrubbing to remove the dead mold.
Grab Hydrogen Peroxide
For a natural, stronger solution to tackle stubborn stains on concrete surfaces, mix flour and hydrogen peroxide into a paste the consistency of peanut butter. Spread it over the stained area, and then scrub it with a nonmetallic brush. After giving it a good scrub, let sit overnight.
Liquid peroxide formulas clean and brighten grout lines without harsh acids and chlorine bleaches that can damage the grout and surrounding flooring materials. The Liquid peroxide cleans, refreshes, and brightens concrete, tile, and grout without leaving watermarks or residue in contrast to other cleaning chemicals.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue. OxiClean is the cleaner for your toughest cleaning jobs. Clean your home, patio, driveway, and more.
It is exactly the same price per gallon, seems to offer better dilution ratios, and has a pH of 9.5 which is much less alkaline than Zep Citrus's 12.0 rating. Simple Green is approved for auto wheels, and even washing the entire vehicle at the correct ratios.
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
Pressure washing is one of the fastest, most effective ways to get your concrete white again. Concrete can change color over time due to pollen, algae, or dirt buildup, but a good pressure wash can easily remove dirt and stains and make your concrete look new again.
Tide (or a similar powdered) detergent: Mix the detergent with a little water to make a paste. Wipe the floor with a wet cloth first, apply the paste, then use a brush to scrub. Rinse the area with clean water.
After disinfection with bleach solutions, surfaces should be rinsed and dried. Bleach can be irritating to skin and mucous membranes, so any residue should be removed prior to returning animals to the environment.