For stubborn shower stains, soap scum and grime, mix one cup of warm water, two cups of white vinegar and one teaspoon of a vegetable-based dishwashing soap in a spray bottle. Spray the solution on the shower walls, let it work for 15 minutes and use a sponge to scrub off scum and grime.
Dawn dish soap and vinegar – Mix equal parts of vinegar and blue Dawn dish soap into a spray bottle. Run the shower for a few minutes on hot to heat up the shower space. Spray to coat the surface of the shower walls evenly with the mixture. Let sit for 5 minutes then use a damp cleaning rag to wipe away.
Spray the floor with the Dawn and vinegar mixture. Use the mop and gently scrub the tile. For stuck-on areas or to spot clean, use a soft bristle brush and scrub the area. After scrubbing the entire floor, rinse the mop.
#1.
Baking soda and hydrogen peroxide are items you can get easily—you may already have them in your home! To make a cleaning paste for your tiles, mix half baking soda and half hydrogen peroxide. Then, put the mixture on the stained tiles and leave it sitting for one hour. After time's up, rinse the tiles.
Sometimes, with soap scum, professionals will need detergents or degreasers as well to clean it thoroughly. Bleach is good for removing mold and mildew from your shower grout, but it's more of a temporary solution. You need to really clean the mold from within and seal the grout to prevent any mold from spreading.
Use Vinegar
Vinegar is one of the most useful kitchen ingredients you can use to remove hard water stains from bathroom tiles. The all-purpose cleaner is mildly acidic in nature and perfect for removing stains from your bathroom. White vinegar also prevents the growth of germs, mold, and mildew in the bathroom.
Spray all over the tub and shower and let it sit for a few minutes to a few hours, depending how challenging the job is. Scrub if you need to, but the scum should rub right off. Don't worry about the strong vinegar smell. You will be pleasantly surprised it smells more like Dawn than vinegar!
Dawn and Vinegar Grout Cleaner
Heat a cup of 1-to-1 vinegar and water in the microwave for about a minute. Pour it into a spray bottle and add a cup of Dawn dish soap. Carefully spray the mixture on your grout lines. Let it sit for 5-10 minutes longer if you have really dirty grout.
Ways to Use this Homemade Cleaner
This Dawn & vinegar cleaner will cut through soap scum, clean sinks, glass shower doors and also the toilet bowl. Just spritz it on, scrub and rinse. For tough soap scum build-up, spray the mixture on and allow it to sit for about 30 minutes. Scrub and rinse.
Grout that hasn't been sealed, needs to be resealed, or is in poor shape should not be cleaned with vinegar. The vinegar penetrates into the pores of the grout, further weakening the material. Over time, vinegar will deteriorate the condition of the grout by etching or wearing it away.
Making Homemade grout cleaner with blue dawn is quite simple. Use one drop of blue dawn in a 32-ounce trigger bottle and mix with water. Spray on the surface standing up and use a microfiber padded mop as apparatus.
“Vinegar is a good cleaner because it's acidic, but when you add dishwashing liquid/dish soap to it (which is a base or neutral) - you neutralise the vinegar. You take away the very thing that makes it work well. “The dishwashing liquid works that well on its own. Adding the vinegar is a pointless step.”
Shower Tile
Begin by pre-treating the surfaces with a water-vinegar solution. Then use a baking soda paste and scrub with a stiff bristle brush. Once you've loosened up the dirt on the tiles, you can use scouring pads to scrub the surface clean.
Try mopping your tile floor using this DIY cleaning recipe: ¼ cup white vinegar, 1 tablespoon liquid dish soap, ¼ cup baking soda, and 2 gallons of very warm water. You can also add a few drops of lavender essential oil for a fresh scent!
Spray Shower with Cleaner
After removing all shower accessories and bottles, spray the entire area with a commercial shower cleaner ($2.28, Walmart) or a DIY shower cleaning solution of equal parts vinegar and dish soap.
Pour 2 cups Dawn and 2 cups vinegar into a glass bowl. Stir; heat 4 minutes in the microwave; remove and stir again. Shake well to mix the solution. Use as needed on shower doors.
To make the best homemade shower cleaner, just combine equal amounts of Dawn dish soap and white vinegar in a spray bottle and gently shake mix. Spray down your shower with it, wait half an hour, then rinse clean!
The best way to get rid of stubborn limescale deposits is by soaking the affected area in lemon juice or white vinegar. Some fixtures may be harder to clean than others, so we've put together a step-by-step guide to help you achieve scale-free taps, showerheads and plugholes.
Try mixing white wine vinegar with either water or baking soda. The acid within the vinegar helps to break down the mineral deposits that build up within hard water stains and limescale, whilst the baking soda helps to dissolve these stains to leave tiles sparkling clean.
Streamline your cleaning product arsenal by using plain old Dawn dish washing liquid as a multitasking cleanser–it does more than dishes! Merry Maids recommends using a drop of Dawn in water to clean ceramic tile and no-wax/linoleum floors.