To clean paver slabs, you can use a detergent, such as Dawn, or a vinegar-water solution that is gentle enough to effectively clean without causing damage to your concrete pavers.
Use soap and water, if the pavers are still dirty after sweeping and water hosing, make a solution of soap and water. You can use dish soap, laundry detergent, or any type of general-purpose cleaner. Never use bleach on your pavers, as it can damage the surface.
One of the best cleaning solutions for pavers is your standard dish soap and water. Dish soap is gentle yet effective at cleaning light stains off the surface of your pavers without compromising the appearance, protective layer, or structure of the pavers.
Wet The Patio With Water
After it's wet, then add some dish soap or a degreaser to a bucket of water. Using a brush that's stiff, pour some water and soap on the pavers and give it all a scrub. Keep it gentle, and don't go overboard on the scrubbing, so you don't damage any of the surfaces.
There are useful tools for cleaning paving stones, such as joint scrapers, sweepers, and pressure washers. In addition, pavers can be cleaned with a small pickaxe, broom, and garden hose.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
The old cleaning solutions are still the best ones, even with pavers. Use your everyday hand soap or dishwashing soap and add in some water to maintain and clean your paver surfaces. Get a bowl or tub of water, put in the appropriate amount of soap, then lightly scrub your paver driveway or walkway using a clean brush.
USE WHITE VINEGAR
Cleaning pavers with vinegar is one of the simplest ways to eliminate stubborn oil stains, or moss, and algae on pavers, particularly brick ones. Vinegar is 5% acetic acid, making it a fairly powerful cleaning agent for breaking down oil, dirt, bacteria, and other kinds of stains.
Make up a 50:50 vinegar and water solution, and apply to the paving – using a watering can will help you get even coverage. Leave the solution to soak for around 20 minutes, then use a stiff brush to remove stains. Once you're done, mop with clean water. Leave to dry before you put anything back on to the patio.
Dish soap and water: Dish soap is a degreaser, and it works well to clean oily and grimy concrete. Create a cleaning solution of warm water and few drops of dish soap and apply it to the surface. Let it sit for a while, then mop the patio and rinse it with fresh water. Repeat the process as many times as needed.
Apply the Simple Green solution. Allow the product to soak for a minute or so on heavy soils and greasy spills. Scrub, if necessary. Scrubbing with a soft bristle brush or non-abrasive scrubbing pad provides agitation that will help to loosen soils and will ensure a thoroughly clean, residue free surface.
Use a detergent such as Dawn or Ajax dishwashing liquid mixed with water to brighten a concrete patio that hasn't been cleaned in a while. Just as you would regularly vacuum the floor and dust your furniture inside your house, you should keep your patio clean so it's ready at a moment's notice to entertain.
Can you power wash pavers? Power washing (also known as pressure washing) is also a very effective method by which you can remove dust deposits and various stains from your pavers. Just make sure that the water jet is not directed directly at the joints between the paving stones.
Properly Cleaning Pavers
Per the Simple Green website, you'll want to mix one cup of water for every ounce of Simple Green being used. PRO TIP: Don't forget to spot test the mixed solution in a hidden area PRIOR to cleaning the entire surface. Next, pour the solution over the pavers and let it sit for 1-2 minutes.
'A homemade cleaning solution for your patio can be made by mixing equal parts water and white vinegar,' says Zak. 'This natural cleaner is effective in removing dirt, mildew, and algae. For stubborn stains, you can add a few drops of liquid dish soap to the mixture. '
Baking soda is an amazing household cleaner, and it can work really well on your pavers too.
White vinegar is good for cleaning pavers, though it's also acidic enough to erode the stones' surface. Diluted vinegar can be used safely to clean paving stones, though it should be used sparingly and infrequently to protect your paving from damage.
Scrubbing Brush and Bucket
Ahhhh the good old-fashioned scrubbing brush. It's been around for such a long time as it genuinely works. When those bristles are passed over the target surface vigorously enough, it'll remove most dirt and stains.
Cleaning your pavers with bleach has a lot of benefits: Disinfecting the Surface: Bleach is an effective disinfectant and can kill any bacteria or mold on the surface. This will help to prevent any health hazards from occurring. Removing Tough Stains: Bleach is also effective in removing tough stains from the surface.
There are a few ways you can remove algae from your green pavers, walls and fencing, some more effective than others. The simplest and most effective way is with HG algae and mould remover.