Bleach is a tough stain remover that cleans and disinfects, and it's safe to use on many bath surfaces. Always wear gloves when using bleach. Bleach should always be diluted; you should never use it full-strength on any surface. Don't use bleach on fiberglass tubs.
You can turn a bathtub white again with hydrogen peroxide, which works as a natural bleach without the harsh odor. Put hydrogen peroxide in an opaque spray bottle and spray the bottom of the top. Let it sit for 15 minutes, then rinse.
For regular cleaning, soap is sufficient. For disinfecting or tackling mold and mildew, bleach can be used but should be handled with care. Always rinse the bathtub thoroughly after cleaning, regardless of the method used.
We found that Clorox is the most popular brand, followed by Method. Our favorite bathtub cleaner, the Scrubbing Bubbles Disinfectant Bathroom Grime Fighter Spray, easily removes soap scum and grime.
Clean the tub thoroughly and rinse everything. Then dry the bath properly with a soft cloth to prevent limescale formation. Do not use aggressive products such as acid, chlorine, ammonia, bleach and abrasives. The latter create fine scratches, which we obviously want to avoid!
Sprinkle baking soda on all tub surfaces. For extra-dirty tubs, use tub-and-tile cleaner instead. Fill your bucket with a half-gallon of hot water and two tablespoons of dish soap. Dip a scrub sponge or a stiff nylon brush into the bucket, and scrub all bathtub surfaces.
“For removing odors, I would say vinegar.” Some people, however, prefer white vinegar because it's not as harsh as bleach. Unless, of course, your washing machine has been completely neglected, and is now a breeding ground for bacteria and germs, and you want a power cleaner.
Yes, put 200ml Whiten bleach (chlorine bleach) directly in the water inside the drum.
Ever notice a yellow tint in your tub? Using bleach or bleach-based products to clean your bathtub will denature the finish and leave a yellow hue to the gloss. This is especially important to remember for refinished surfaces.
How do I get my bathtub white again? By cleaning your bath with a mixture of white vinegar, water and baking soda, you should be able to rid your bath of most common stains and maintain its white finish.
Diluted household bleach has been safely used for many years to help treat skin infections. A small amount of bleach added to the bath is recommended for conditions such as eczema, impetigo (school sores), boils, and infected wounds, to help reduce bacteria on the skin and improve the severity of disease.
Vinegar is cleaning agent that some online cleaning “gurus” will recommend to use on your tub to clean scum and grime. It too, however, can eat away at the surface of your tub over time, so don't use it if you want to prolong the life of your bathtub.
Isn't bleach a good disinfectant? small droplets that can be inhaled into the lungs by the staff and children. Children are at greater risk from breathing bleach vapors because their lungs are still developing. Bleach can irritate the skin and eyes.
But before you step into your freshly scrubbed bathtub or launch into your skincare routine at your squeaky-clean sink, experts recommend you pause first to give your bathroom some breathing room, especially if you've used potent cleaners to sanitize and disinfect the surfaces.
There are certain substances you should never mix with vinegar, including bleach and ammonia, because these combinations will produce chlorine gas and toxic vapors, says Ryan Sinclair, an environmental microbiologist and associate professor at the Loma Linda University School of Public Health.
Since it's made without chemicals, vinegar is certainly a more environmentally-friendly choice for cleaning over bleach, but keep in mind that its disinfectant properties are not as strong.
"Vinegar softens clothes by breaking down excess detergent that makes clothes feel stiff," says Patric Richardson of The Laundry Evangelist. Never mix vinegar with bleach or chlorine bleach, as the combination is highly toxic.
Run the wash cycle with an extra rinse to make sure no bleach is left behind. If your washing machine doesn't have the option for an extra rinse cycle, manually select a rinse cycle after the cycle is over and start the washing machine again.
Top Tips For a Clean Bathtub
Baking soda is a natural deodorizer, mild abrasive, and grime fighter. It's safe on most bathtub surfaces and will tackle everything from soap scum to hard water stains.
Dishsoap is one of the best ways to clean the bottom of a bathtub. Use a scrub brush or small broom to scrub dish soap around the bottom of your bathtub, then use the shower head to rinse it off. For stubborn stains, scrub with dishsoap then fill with hot water and leave it for a bit before scrubbing and rinsing.
As the hours pass, the dish soap loosens and lifts away the grime that has taken residence on your bathtub's surface. This gentle, overnight process ensures you awaken to a bathtub that radiates brilliance, saving you time and effort in the long run.