Shower Tiles We recommend covering tiles close to the shower when cleaning your shower glass. Bar Keepers Friend products are often used for tiles, however they are not recommended for porous surfaces, matte finish or coloured grout. The main thing is to always test on a small area first and rinse thoroughly.
No problem! Looking for the best way to clean glass shower doors, sinks, toilets, and other bathroom surfaces? Look no further than Bar Keepers Friend. Our bathroom cleaners tackle rust, hard water stains, mineral deposits, soap scum, and grime to keep your bathroom fresh and sparkling.
For stubborn shower stains, soap scum and grime, mix one cup of warm water, two cups of white vinegar and one teaspoon of a vegetable-based dishwashing soap in a spray bottle. Spray the solution on the shower walls, let it work for 15 minutes and use a sponge to scrub off scum and grime.
Tiles can be made so differently and there is a huge variety of textures, meaning Bar Keepers Friend is not suitable for all tiles. Not sure what type of tile you have? Check out common types of tiles here. IMPORTANT READ FIRST: Bar Keepers Friend is not recommended on porous surfaces, matte finish or coloured grout.
Cleaning your Grout with BKF
BKF works wonders. I use Bar Keepers Friend Soft Cleanser about once a week, and it keeps it shiny. For tougher grime I use BKF Powder.
Yet, hydrogen peroxide is one of the best shower cleaners used by professionals. All you need is a toothbrush and a bottle of hydrogen peroxide. Before using any chemicals, scrub the grout with water to dislodge loose debris. Rinse thoroughly, and then go in with the hydrogen peroxide.
Next, ensure you're NOT scrubbing any of the tiled areas with bleach or ammonia products. Chemical cleaners, such as, Tilex, Soft Scrub, Scrubbing Bubbles, or ammonia products will nearly always result in your tile surfaces' grout becoming very discolored.
Baking soda, a gentle abrasive, scrubs away stains while neutralizing odors. Lemon juice, a natural disinfectant and degreaser, brightens tiles and removes stubborn stains. Castile soap, a plant-based soap, is gentle on surfaces and serves as a base for homemade cleaning solutions.
While Bar Keepers Friend is powerful, it's essential not to leave it on surfaces for extended periods. If left for too long, it can etch surfaces. Apply the product, let it sit for only one minute, scrub as needed, and rinse promptly. Repeat if necessary.
Is Bar Keepers Friend just baking soda? Despite its similar appearance, Bar Keepers Friend is not the same as baking soda. Bark Keepers Friend is made from oxalic acid, a powerful cleaning chemical that can break down hard-to-move marks, grime, and dirt with ease.
Ingestion: May cause irritation of the mouth and intestinal tract. Skin corrosion/irritation: Not a skin corrosive. Eye damage/ irritation: Causes eye damage. Respiratory irritation: Dust may be irritating to the respiratory system.
BKF is totally septic system safe when used in normal daily applications.
“The key is to use as small an amount of BKF as the project allows and rinse thoroughly. The micro-abrasive particles may temporarily leave a white film if not rinsed completely. The abrasive used in BKF will not scratch glass or porcelain when properly used.” — Bar Keepers Friend FAQ.
Any of the Bar Keepers Friend products listed above will power through soapy residue, rust and mildew stains, and hard water buildup. Using a wet sponge or non-scratch scrubbing pad and a dry cloth, you can have that tub looking like new in no time. Here's how to clean bathtub grime in no time.
Use a solution of equal parts water and white vinegar. Simply mix the solution in a spray bottle and apply it to the tiles. Let it sit for a few minutes before wiping it away with a damp cloth or sponge. Another effective cleaning solution is baking soda and water paste.
harsh chemicals, such as bleach and acid, including lemon and vinegar, for routine cleaning; these can cause damage to the tiles and grout if used regularly and are also health hazards as well as posing danger to other property near the tiles.
Avoid oil- and wax-based cleaners and never use a solution containing acids, ammonia, or bleach on your glazed porcelain tiles. These products can alter the color of the tile and eat away the grout.
Our top pick is Clorox Clean-Up Cleaner and Bleach. Clorox Clean-Up Cleaner Spray does an excellent job getting your shower clean. Difficult stains melt away in just about a single swipe, with very little effort. Stains clinging to grout were gone after a pass or two.
Most of these tips include the use of sodium carbonate, white vinegar or oxygen-based bleach (hydrogen peroxide, sodium percarbonate or sodium perborate as opposed to chlorine-based bleach). Oxygen-based solutions are indeed a safer alternative for indoor cleaning, are more eco-friendly and can be extremely effective.
Use equal parts water and baking soda, apply the paste, and allow it to sit for half an hour. Scrub the baking soda paste and rinse. A similar method works with hydrogen peroxide and vinegar. Mix two parts of hydrogen peroxide to water, spray your grout, and let it sit while it works.
Some professionals swear by a simple mixture of baking soda and peroxide to clean grout. Hydrogen peroxide is an acid, and baking soda is a base compound. Mixing the two together creates a reaction that can penetrate the grout lines and free dirt and debris.
I followed the package instructions and sprayed it on the grout, let it sit for 3 minutes, agitated the long-standing dirt with a brush, and then wiped this away with a wet towel.