The following tips can help remove brown deposits: Get started with cleaning vinegar. Pour it on the spot where the tarnish occurs and leave for a few hours. Afterwards, rinse again with water.
The acidic values of vinegar allow it to soften limescale and prepare it for scrubbing clean. Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush.
A broken or damaged wax ring allows water to pool around the base of a toilet. If this area is persistently damp or wet, then mold might start to grow. Look at the base of your toilet. If you can see spots of black mold around its edges, then you might have a leaking wax ring.
Once the bowl is empty, add some cleaning vinegar (or regular white vinegar if this is all you have) to the bowl to completely cover any stains. If your stains are more up underneath the rim or along the sides, soak a rag or paper towels in the vinegar and place over stain. Leave overnight and then scrub.
Prepare a vinegar and borax or baking soda paste and apply it all over the stains. Wait for about 30 minutes and scrub off the stains using a toilet brush.
Apply baking soda to the tarnish and leave for a few hours. You can also use baking soda in combination with vinegar. Try a mild urine scale remover or limescale remover to tackle brown deposits.
When you're cleaning the toilet bowl, it's crucial that you also clean under the rim. To do this, you can use Lysol® Power Toilet Bowl Cleaner, which both cleans and disinfects your entire toilet and is especially angled to hit your toughest stains directly under the rim.
For older stains, using an industrial-strength cleaner like CLR should do the trick. Another less conventional strategy you can try is removing the stains with Coca-Cola. To do this, simply pour a full can of Coke into the toilet and let it sit in the bowl overnight. Then flush the toilet the next day.
Use a tool like the cutting pliers to cut a 6-inch length from a wire coat hanger. Try cutting the wire hanger at an angle so the end you stick into the holes is pointy. Work the wire hanger in and around each of the rinse holes to clear them. If you need to see what you're doing, hold a mirror under the rim.
Get rid of toilet rings with magic erasers
Cut off a quarter of a magic eraser and drop it into the toilet water. Let the piece sit in your toilet overnight to work its… well, magic! Do not flush the magic eraser down the toilet ! Remove it in the morning, then flush to rinse away any residue.
Fortunately, the solution is pretty straightforward. Grab a toilet brush and a bathroom cleaner (or toilet bowl solution), and scrub diligently. Pay close attention to areas around the rim where water flows into the bowl.
Plunging down too hard
A hard thrust downward can break the wax seal between the toilet and the floor, causing a leak. And a really hard thrust could even crack the bowl.
Always wear gloves when cleaning with vinegar to protect your skin from the acid. A special tip: Coca Cola – this fizzy drink contains phosphoric acid which also removes limescale and urine scale.
When it comes to being good for the environment, CLR has a slight advantage. It's biodegradable and part of the EPA's Safer Choice Program, which recognizes products with safer ingredients. Lime Away works well, but it doesn't have the same environmental certifications.
The best all-natural cleaner for hard water stains in a toilet is vinegar. This safe household product works to quickly clean limescale buildup and is an affordable option for a cleaner.
Soak loo roll in white vinegar and push it under the rim,leave as long as possible. Repeat until limescale goes. Hard water area here too, I use black bottle harpic power plus. Then use a toilet block like bloo under the rim clear rinse one to keep on top of the issue.
White vinegar is the perfect cleaning agent if the toilet rim has mineral deposits. Since vinegar is an acidic product, it dissolves the buildup (and even takes care of any bacteria problems to a degree), leaving your toilet as good as new.
Start by pouring a cup of vinegar into the bowl and using a toilet brush to spread it under the rim. Let it sit for a few minutes or a day, giving it time to break down the stains. Then, sprinkle baking soda around the rim and over the vinegar-soaked areas.
So, which one should you go for? It really depends on what kind of cleaning you need to do. If you're dealing with really tough, built-up mineral deposits, especially in your bathroom or kitchen, CLR might be the way to go. It's strong enough to handle stains that vinegar might struggle with.
White vinegar
All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
If CLR Grease & Oil Remover is left on a surface for too long it begins to dry and can be very difficult to remove.
Use a solution of one part bleach to ten parts water. Let it sit about five minutes in the overflow tube, then flush the toilet. Then put on some gloves and use a piece of wire to clean out each jet. When all the jets are clean, scrub around them with a bleach-compatible cleaner.